Biogenic Co3O4-embedded polycaprolactone nanocomposites for sustainable active food packaging applications
Source abstract
Abstract
This study addresses the development of active and intelligent food packaging as a sustainable alternative to petroleum-based plastics. The innovation lies in the eco-friendly biosynthesis of tricobalt tetroxide nanoparticles (Co 3 O 4 -NPs) by green synthesis route using Ginkgo biloba extract, thereby eliminating harsh reagents, and in the comparison of two methods for incorporating Co 3 O 4 -NPs into a polycaprolactone (PCL) matrix (i.e., direct electrospinning and immersion) at concentrations of 5% and 10% by weight. Regarding methodology, the materials were analyzed using structural, mechanical, ecological, and microbiological techniques. Mechanical results indicated that incorporating 5% Co 3 O 4 -NPs by electrospinning refined the fibers and acted as a reinforcement, significantly increasing tensile strength, elasticity, and ductility. In contrast, the 10% Co 3 O 4 -NPs concentration resulted in agglomeration and a loss of mechanical performance. Additionally, UV radiation tests showed that films with 5% Co 3 O 4 -NPs underwent accelerated degradation, whereas those with 10% Co 3 O 4 -NPs protected the PCL. Regarding biocompatibility, VERO cell tests confirmed the biological safety of the PCL@Co 3 O 4 -NPs. Notably, the potential disposal of PCL@Co 3 O 4 -NPs proved safe: no seed phytotoxicity was observed, and soil tests demonstrated safe degradation with controlled cobalt release. From a microbiological perspective, the PCL@Co 3 O 4 -NPs inhibited pathogen formation, significantly reducing P. aeruginosa biofilm, particularly at the 10% Co 3 O 4 -NPs concentration. Therefore, the formulation with 5% Co 3 O 4 -NPs is the most promising and balanced alternative, as it optimizes mechanical performance, biocompatibility, and sustainable degradation for active packaging.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Nanocomposite Films for Food Packaging · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Recent advances of sustainable and recyclable polymer materials from renewable resources
2. Increased plastic pollution due to COVID-19 pandemic: challenges and recommendations10.1016/j.cej.2020.126683 ↗
3. Enhancing polymer sustainability: Eco-conscious strategies10.3390/polym16131769 ↗
4. Closing the gap between bio-based and petroleum-based plastic through bioengineering10.3390/microorganisms10122320 ↗
5. Life cycle assessment of photodegradable polymeric material derived from renewable bioresources10.1016/j.jclepro.2016.10.177 ↗
6. Impact of plastic contaminants on marine ecosystems and advancement in the detection of micro/nano plastics: a review
7. Methods of controlling microbial contamination of food10.3390/pathogens14050492 ↗
8. A review on smart active packaging systems for food preservation: applications and future trends10.1016/j.tifs.2023.104200 ↗
9. Recent developments in smart food packaging focused on biobased and biodegradable polymers10.3389/fsufs.2021.630393 ↗
10. Review of bio-based biodegradable polymers: smart solutions for sustainable food packaging10.3390/foods13193027 ↗
11. Microbial degradation of four biodegradable polymers in soil and compost demonstrating polycaprolactone as an ideal compostable plastic10.1016/j.wasman.2019.07.042 ↗
12. Biodegradable biopolymers: real impact to environment pollution10.1016/j.scitotenv.2024.174445 ↗
13. Sustainable green synthesis of metallic nanoparticle using plants and microorganisms: a review of biosynthesis methods, mechanisms, toxicity, and applications10.1016/j.jece.2025.116921 ↗
14. Chemical structure design for eco-friendly dielectric polymer materials10.1016/j.progpolymsci.2025.102014 ↗
15. Green synthesis of nanomaterials for smart biopolymer packaging: challenges and outlooks10.1007/s40097-023-00527-3 ↗
16. Green fabrication of Co and Co3O4 nanoparticles and their biomedical applications: a review10.1515/biol-2021-0003 ↗
17. Facile and green synthesis of multifunctional nitrogen-doped carbon quantum dots from Ginkgo biloba leaves for antibacterial, antioxidant, and bioactive coating applications, food packag
18. A review on plant extract-based route for synthesis of cobalt nanoparticles: photocatalytic, electrochemical sensing and antibacterial applications10.1016/j.crgsc.2022.100270 ↗
19. New green approaches in nanoparticles synthesis: an overview10.3390/molecules27196472 ↗
20. Use of modified polycaprolactone polymer in food packaging applications: a review
21. Poly(ε‐caprolactone): a potential polymer for biodegradable food packaging applications10.1002/pts.2572 ↗
22. Electrospun polycaprolactone nanofibers: current research and applications in biomedical application
23. Polycaprolactone/Chitosan electrospun nanofibrous membranes loaded Chinese yam polysaccharide for active food packaging10.1016/j.lwt.2024.115985 ↗
24. Exploring biodegradable polymeric nanocomposite films for sustainable food packaging application10.3390/polym17162207 ↗
25. Biogenesis of bacterial cellulose/xanthan/CeO2NPs composite films for active food packaging10.1016/j.ijbiomac.2024.133091 ↗
26. Effect of the Fe2O3/TiO2 nanoparticles on the structural, mechanical, electrical properties and antibacterial activity of the biodegradable Chitosan/Polyvinyl alcohol blend for food packaging10.1007/s10924-022-02478-2 ↗
27. Enhanced structural, electrical, mechanical properties and antibacterial activity of Cs/PEO doped mixed nanoparticles (Ag/TiO2) for food packaging applications10.1016/j.polymertesting.2020.107013 ↗
28. Simultaneous adsorption and degradation of triclosan by Ginkgo biloba L. stabilized Fe/Co bimetallic nanoparticles10.1016/j.scitotenv.2019.01.194 ↗
29. Development of novel green tricobalt tetroxide nanoparticles: photocatalytic activity and in vitro safety profile10.1016/j.seppur.2025.132732 ↗
30. Effects of electrospinning parameters on polycaprolactone membrane diameter: an investigation utilizing central composite design and characterization10.1016/j.rineng.2025.104002 ↗
31. Electrospun nanofibers for functional food packaging application10.3390/ma16175937 ↗
32. Preparation of Fe3O4/PVA nanofibers via combining in-situ composite with electrospinning10.1016/j.matlet.2009.09.043 ↗
33. The seed germination test as a valuable tool for the short-term phytotoxicity screening of water-soluble polyamidoamines10.3390/polym16121744 ↗
34. Effects of UV radiation on natural and synthetic materials10.1007/s43630-023-00377-6 ↗
35. Cytotoxicity of methanol extracts of Elaeis guineensis on MCF-7 and Vero cell lines10.1016/S2221-1691(12)60237-8 ↗
36. Cytotoxicity, nitric oxide and acetylcholinesterase inhibitory activity of three limonoids isolated from Trichilia welwitschii (Meliaceae)10.1186/s40659-015-0049-0 ↗
37. Analysis of Single- and double-stranded DNA damage in osteoblastic cells after Hyperbaric oxygen exposure10.3390/antiox12040851 ↗
38. Soil texture mediates the toxicity of ZnO and Fe3O4 nanoparticles to microbial activity10.3390/toxics13020084 ↗
39. Microtiter plate assays to assess antibiofilm activity against bacteria10.1038/s41596-021-00515-3 ↗
40. Preparation and characterization of poly(ε‐caprolactone)/Fe3O4 nanocomposites
41. Effect of crystallinity on the properties of polycaprolactone nanoparticles containing the dual FLAP/mPEGS-1 inhibitor BRP-18710.3390/polym13152557 ↗
42. Recent advances in functional biopolymer films with antimicrobial and antioxidant properties for enhanced food packaging10.3390/polym17091257 ↗
43. Development of PCL/PMMA and PCL/PEG polymeric film as potential for algae removal10.17576/jsm-2024-5306-07 ↗
44. Water-Soluble nanocomposites containing Co3O4 nanoparticles incorporated in Poly-1-vinyl-1,2,4-triazole10.3390/polym15132940 ↗
45. Development of novel thin polycaprolactone (PCL)/clay nanocomposite films with antimicrobial activity promoted by the study of mechanical, thermal, and surface properties10.3390/polym13183193 ↗
46. Biocompatibility assessment of polycaprolactone/polylactic acid/zinc oxide nanoparticle composites under in vivo conditions for biomedical applications10.3390/pharmaceutics15092196 ↗
47. Morphology and structure of electrospun CoFe2O4/multi-wall carbon nanotubes composite nanofibers10.1016/j.cej.2010.05.025 ↗
48. Electrospun PVA/Co3O4 nanofibers: a sustainable catalyst for peroxymonosulfate-mediated degradation of tetracycline10.1021/acsomega.5c01013 ↗
49. Co3O4/carbon composite nanofibrous membrane enabled high-efficiency electromagnetic wave absorption10.1038/s41598-018-30871-2 ↗
50. Synthesis and biocompatibility evaluation of PCL electrospun membranes coated with MTA/HA for potential application in dental pulp capping10.3390/polym14224862 ↗
51. Active colorimetric bilayer polycaprolactone-eucalyptus oil@silk fibroin-bayberry anthocyanins (PCL-EO@SF-BAs) membrane with directional water transport (DWT) for food packaging10.1016/j.jcis.2023.07.181 ↗
52. Characterization of polycaprolactone/Ti3C2TX MXene nanocomposites fabricated via injection molding10.1016/j.polymer.2025.129065 ↗
53. An intelligent active polylactic acid/gelatin nanofibrous membrane with janus structure for meat freshness monitoring and preservation
54. Caranan fibers (Mauritiella armata) and new reinforcements of polyester composites with natural fibers functionalized with graphene oxide and their application potential10.1016/j.jmrt.2024.12.233 ↗
55. Performance of poly(caprolactone) (PCL) as an impact modifier for polystyrene (PS): effect of functionalized compatibilizers with maleic anhydride and glycidyl methacrylate10.3390/su14159254 ↗
56. Synthesis and properties of magnetic Fe3O4/PCL porous biocomposite scaffolds with different sizes and quantities of Fe3O4 particles10.3390/bioengineering9070278 ↗
57. Strongly improved mechanical properties of thermoplastic biocomposites by PCL grafting inside holocellulose wood fibers10.1021/acssuschemeng.0c02512 ↗
58. Elastic modulus of β-Ga2O3 nanowires measured by resonance and three-point bending techniques10.3762/bjnano.15.58 ↗
59. Impact of Co3O4 nanoparticles on epoxy's mechanical and corrosion-resistance properties for carbon steel in seawater10.1038/s41598-024-53967-4 ↗
60. Polycaprolactone nanocomposite reinforced by bioresource starch-based nanoparticles10.1016/j.ijbiomac.2017.05.019 ↗
61. Crystallization behavior and mechanical properties of Poly(ε-caprolactone) reinforced with barium sulfate submicron particles10.3390/ma14092368 ↗
62. Biodegradable poly (lactic acid) nanocomposites reinforced and toughened by carbon nanotubes/clay hybrids10.1016/j.ijbiomac.2020.02.209 ↗
63. Preparation and characterization of polyaniline/sodium alginate-doped TiO2 nanoparticles with promising mechanical and electrical properties and antimicrobial activity for food packaging applications10.1007/s10854-020-03483-8 ↗
64. Phytotoxicity of metal oxide nanoparticles is related to both dissolved metals ions and adsorption of particles on seed surfaces
65. Polycaprolactone-collagen hydrolysate thermoplastic blends: processability and biodegradability/compostability10.1016/j.polymdegradstab.2018.02.001 ↗
66. Effects of copper oxide nanoparticles on growth of lettuce (Lactuca sativa L.) seedlings and possible implications of nitric oxide in their antioxidative defense10.1007/s10661-020-8188-3 ↗
67. Phytotoxicity evaluation of poly (ɛ-caprolactone) nanocapsules prepared using different methods and compositions in Brassica juncea seeds10.1016/j.plana.2022.100003 ↗
68. Bioactive electrospun polycaprolactone films with gallic acid-loaded mesoporous silica nanoplatelets for enhanced seed germination10.1021/acsmaterialsau.5c00062 ↗
69. Impact of UV-C on material degradation: a scoping literature review10.1017/ash.2025.10114 ↗
70. Mechanical, barrier, and photodegradation properties of biodegradable PLA-based blend films10.1039/D5SU00454C ↗
71. Osteogenic differentiation of rat bone mesenchymal stem cells cultured on poly (hydroxybutyrate-co-hydroxyvalerate), poly (ε-caprolactone) scaffolds10.1007/s10856-021-06615-6 ↗
72. Synthesis, characterization, and cytotoxicity of doxorubicin-loaded polycaprolactone nanocapsules as controlled anti-hepatocellular carcinoma drug release system10.1186/s13065-022-00888-w ↗
73. Nitric oxide acts as an antioxidant and delays programmed cell death in barley aleurone layers10.1104/pp.002337 ↗
74. Engineered cobalt oxide nanoparticles readily enter cells10.1016/j.toxlet.2009.06.851 ↗
75. Silver-loaded poly(vinyl alcohol)/polycaprolactone polymer scaffold as a biocompatible antibacterial system10.1038/s41598-024-61567-5 ↗
76. Poly(gallic acid)-coated polycaprolactone inhibits oxidative stress in epithelial cells, mater10.1016/j.msec.2020.111154 ↗
77. A universal uptake mechanism for cobalt(II) on soil constituents: ferrihydrite, kaolinite, humic acid, and organo-mineral composites10.1016/j.gca.2018.06.035 ↗
78. The fate and impact of Co3O4 nanoparticles in the soil environment: observing the dose effect of nanoparticles on soybeans10.1016/j.jenvman.2024.122186 ↗
79. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature10.1590/0366-69132022683853152 ↗
80. TiO2-NPs/ZnO-NPs@Co3O4 nanocomposite from natural extracts for the Rhodamine 6 G photodegradation10.1016/j.surfin.2024.104282 ↗
81. Polycaprolactone (PCL)-based films integrated with hairy cellulose nanocrystals and silver nanoparticles for active Tilapia packaging applications10.1016/j.fochx.2024.101490 ↗
82. The antibiofilm nanosystems for improved infection inhibition of microbes in skin10.3390/molecules26216392 ↗
83. Phyto-fabricated nanoparticles and their anti-biofilm activity: progress and current status10.3389/fnano.2021.739286 ↗
84. Impact of nanosystems in Staphylococcus aureus biofilms treatment10.1093/femsre/fuz021 ↗
85. Recent progress in enhanced optical, mechanical, thermal properties, and antibacterial activity of the Chitosan/Polyvinylalcohol/Co3O4 nanocomposites for optoelectronics and biological applications10.1007/s10924-024-03191-y ↗