journal article·2026-09Open access

Acetic-acid-assisted washing-free synthesis of Cu nanoparticles from CuO for low-temperature sintering of conductive films

Yamato Hayashi, Takaharu Nakajima, Yoshihiro Sekiguchi, Hirotsugu Takizawa

Abstract

Copper nanoparticles (Cu NPs) are promising low-cost alternatives to Ag-based conductive fillers for printed electronics; however, conventional synthesis routes often require low precursor concentrations, large amounts of dispersants, and post-synthesis purification, with the associated increase in costs and waste liquid generation limiting their practical scalability. Here, we investigate the role of molecular additives in the high-concentration, washing-free synthesis of Cu NPs from CuO and evaluate the low-temperature sintering behavior of the resulting particles. Among the additives examined, acetic acid effectively reduced the particle size, yielding Cu NPs with an average diameter of 89.2 nm. Thermogravimetric analysis indicated that acetic acid-derived species were removed at relatively low temperatures, whereas long-chain or multifunctional additives such as oleic and citric acids remained to higher temperatures and adversely affected sintering. The unwashed acetic-acid-assisted Cu NP paste exhibited pronounced interparticle neck formation and achieved a low volume resistivity of 1.9 × 10 -5 Ω·cm (9.1% International Annealed Copper Standard(IACS)) after sintering at 250 °C for 60 min under nitrogen without applied pressure. These results suggest that acetic acid plays a dual role in particle-size reduction and low-temperature sintering, possibly by providing removable surface species that facilitate particle contact and neck growth. The CuO-derived washing-free process combined with acetic acid addition enhances process sustainability by reducing washing steps, associated costs, and washing-related liquid waste, thereby offering a practical route for preparing low-cost Cu conductive films under mild sintering conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Copper-based nanomaterials and applications · Nanomaterials and Printing Technologies · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Patterning at the micro/nano-scale: polymeric scaffolds for medical diagnostic and cell-surface interaction applications10.1016/j.colsurfb.2022.112730 ↗
2. Chemical patterning of ultrathin polymer films by direct-write multiphoton lithography10.1021/ja200313q ↗
3. Lithography
4. Novel method for room temperature sintering of Ag nanoparticle paste in air10.1016/j.cplett.2007.05.033 ↗
5. Low‐temperature sintering bonding using silver nanoparticle paste for electronics packaging10.1155/2015/897142 ↗
6. Low-temperature oxidation-free selective laser sintering of Cu nanoparticle paste on a polymer substrate for the flexible touch panel applications10.1021/acsami.5b12714 ↗
7. State of the art in gold nanoparticle synthesis10.1016/j.ccr.2012.09.002 ↗
8. Nano-gold catalysis in fine chemical synthesis10.1021/cr200260m ↗
9. Silver nanoparticles: synthesis, investigation techniques, and properties10.1016/j.cis.2020.102246 ↗
10. Current research on silver nanoparticles: synthesis, characterization, and applications10.1155/2021/6687290 ↗
11. The anti-electrochemical migration mechanism of Ag-based transient liquid-phase electrically conductive adhesive: experimental and phase-field study10.1016/j.apsusc.2025.162998 ↗
12. The financial economics of white precious metals — a survey10.1016/j.irfa.2017.04.006 ↗
13. The financial economics of gold — a survey10.1016/j.irfa.2015.07.005 ↗
14. Eco-friendly sonochemical synthesis of BaTiO3/Ag nanocomposite particles: investigation of Ag-nanoparticle formation and growth behavior under ultrasound irradiation10.1016/j.ultsonch.2025.107539 ↗
15. Sustainable fabrication of functionally graded material type Ag/silicone rubber nanocomposite by sonochemical effects10.1016/j.ultsonch.2025.107496 ↗
16. Synthesis of BaTiO 3/Ag nanocomposites using a sonochemical process and low-temperature sintering10.1080/21870764.2023.2251243 ↗
17. A reaction study of sulfur vapor with silver and silver–indium solid solution as a tarnishing test method10.1007/s10854-016-5124-y ↗
18. Electrochemical migration behavior of low-temperature-sintered Ag nanoparticle paste using water-drop method10.1007/s10854-021-05289-8 ↗
19. Atomistic insights into silver-indium solid solution softening mechanism for microelectronics packaging10.1016/j.jmrt.2023.04.214 ↗
20. Antioxidant high-conductivity copper paste for low-cost flexible printed electronics10.1038/s41528-022-00151-1 ↗
21. A high-performance nano-copper paste with good oxidation resistance10.1016/j.jmrt.2025.08.010 ↗
22. Low-temperature and low-pressure sinter-bonding for thermoelectric generator devices using Cu nanoparticle paste
23. A novel method to prepare cu@Ag core–shell nanoparticles for printed flexible electronics10.1016/j.powtec.2014.04.064 ↗
24. Synthesis of high-concentration Cu nanoparticles in aqueous CTAB solutions10.1016/j.jcis.2004.01.071 ↗
25. Copper metallic particles synthesized “in Situ” in reverse micelles: influence of various parameters on the size of the particles10.1021/j100014a030 ↗
26. Controllable synthesis of submicrometer-sized copper crystallites with different morphologies10.1016/j.matlet.2008.03.031 ↗
27. Fabrication of Cu nano particles by direct electrochemical reduction from CuO nano particles10.1016/j.apsusc.2005.04.049 ↗
28. Sonochemical synthesis of amorphous Cu and nanocrystalline Cu2O embedded in a polyaniline matrix10.1039/b005769j ↗
29. High-throughput and waste-reducing synthesis of dispersant-free Cu nanoparticles via CuO reduction
30. Synthesis of Cu fine particles via a solid–liquid reduction method using copper oxide10.2109/jcersj2.25155 ↗
31. A study of the nucleation and growth processes in the synthesis of colloidal gold10.1039/df9511100055 ↗
32. Facile synthesis of surface oxide free copper nanoparticles by in-situ coating with oleic acid10.1016/j.powtec.2014.04.031 ↗
33. Copper nanoparticles: aqueous phase synthesis and conductive films fabrication at low sintering temperature10.1021/am400480k ↗
34. Ligand binding to copper nanocrystals: amines and carboxylic acids and the role of surface oxides10.1021/acs.chemmater.8b05107 ↗
35. Facile synthesis of surface oxide free copper nanoparticles by in-situ coating with oleic acid10.1016/j.powtec.2014.04.031 ↗
36. Abietic acid encapsulated Sn-57Bi alloy nanoparticles as oxidation resistant solder material10.1016/j.colsurfa.2020.125083 ↗
37. In situ study on growth behavior of interfacial bubbles and its effect on interfacial reaction during a soldering process10.1016/j.apsusc.2014.03.003 ↗
38. 2005
39. Thermal decomposition of citric acid10.1016/0040-6031(86)87081-2 ↗
40. Low-temperature and low-pressure Cu–Cu bonding by highly sinterable Cu nanoparticle paste10.1186/s11671-017-2037-5 ↗
41. Preparation of PVP coated Cu NPs and the application for low-temperature bonding10.1039/c1jm12108a ↗
42. Ambient aqueous-phase synthesis of copper nanoparticles and nanopastes with low-temperature sintering and ultra-high bonding abilities10.1038/s41598-018-38422-5 ↗
43. Electrical conductivity of copper nanoparticle thin films annealed at low temperature10.1016/j.tsf.2010.07.023 ↗
44. Sintering of Cu nanoparticles for optimized particle size and enhanced interconnect performance10.1016/j.jtice.2025.106185 ↗