journal article·2026-09

Biocompatible conversion coating on WE43 magnesium alloy for the interface layer of biodegradable drug-eluting stents

An-Yu Cheng, Kuei-Ping Liu, Yih-Ming Liu

Publisher page

Abstract

WE43 magnesium alloy is a promising substrate for biodegradable vascular devices owing to its low density and favorable mechanical properties, but its rapid corrosion severely limits long-term performance in physiological electrolytes. In this work, zirconium- and neodymium-based biocompatible conversion coatings were developed on electropolished WE43 as interfacial layers for paclitaxel (PTX)-loaded hybrid coatings, with the aim of improving corrosion protection and interface stability. The effects of the conversion chemistry on coating morphology, surface chemistry, roughness, and wettability were investigated by SEM, XPS, white light interferometry, and contact angle measurements. Corrosion behavior was evaluated using potentiodynamic polarization, long-term hydrogen evolution tests, and scanning electrochemical microscopy (SECM) to probe localized electrochemical activity at the coating/substrate interface.Among all samples, the Zr-PTX coating exhibited the densest and most crack-free morphology, a more positive corrosion potential, and a corrosion current density approximately one order of magnitude lower than that of bare WE43, together with the lowest hydrogen evolution rate and degradation rate during immersion. SECM mapping further revealed a nearly homogeneous low-current distribution on Zr-PTX, whereas EP-PTX and Nd-PTX coatings showed pronounced current hot-spots associated with surface cracks and interfacial delamination, indicating that the Zr-based conversion layer effectively suppresses localized corrosion pathways. The combined results demonstrate that the EP + Zr conversion + PTX hybrid coating route provides a compact, corrosion-resistant, and biocompatible surface pretreatment for WE43 magnesium alloy, offering a robust platform for coating-based surface engineering of biodegradable metallic implants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Global burden of 288 causes of death and life expectancy decomposition in 204 countries and territories and 811 subnational locations, 1990–2021: a systematic analysis for the global burden of disease study 202110.1016/S0140-6736(24)00367-2 ↗
2. Nanomedicines for cardiovascular diseases: lessons learned and pathways forward10.1016/j.biomaterials.2025.123271 ↗
3. Effect of stenting plus medical therapy vs medical therapy alone on risk of stroke and death in patients with symptomatic intracranial stenosis: the CASSISS randomized clinical trial10.1001/jama.2022.12000 ↗
4. A polyphenol-network-mediated coating modulates inflammation and vascular healing on vascular stents10.1021/acsnano.2c00642 ↗
5. Current status and future direction of metallic and polymeric materials for advanced vascular stents10.1016/j.pmatsci.2022.100922 ↗
6. Composite coatings of S-HA nanoparticles and schiff base on ZE21B alloy for stronger corrosion resistance and biological performance10.1016/j.jma.2023.11.009 ↗
7. A biodegradable magnesium alloy vascular stent structure: design, optimisation and evaluation10.1016/j.actbio.2022.01.045 ↗
8. Joule‐assisted nanotherapeutic urethral stent (JANUS) for spatiotemporal theragenerative treatment of urethral strictures10.1002/adfm.202416694 ↗
9. Rational design, synthesis and prospect of biodegradable magnesium alloy vascular stents10.1016/j.jma.2023.07.020 ↗
10. Recent developments in high-strength Mg-RE-based alloys: focusing on Mg-Gd and Mg-Y systems10.1016/j.jma.2018.08.001 ↗
11. Biodegradable metals for cardiovascular stent application: interests and new opportunities10.3390/ijms12074250 ↗
12. Magnesium basics10.1093/ndtplus/sfr163 ↗
13. Corrosion resistance of WE43 Mg alloy in sodium chloride solution10.1016/j.matchemphys.2021.124930 ↗
14. Effect of microstructure on tensile and compressive behavior of WE43 alloy in as cast and heat treated conditions10.1016/j.msea.2017.10.084 ↗
15. Reproductive and developmental toxicity of natural and depleted uranium: a review10.1016/S0890-6238(01)00181-2 ↗
16. Aluminium as a risk factor in Alzheimer's disease, with emphasis on drinking water10.1016/S0361-9230(01)00459-2 ↗
17. Effect of Mn addition on corrosion and biocompatibility characteristics of a new biodegradable Mg–1Ca–2Zn–1RE alloy10.1007/s12540-020-00885-5 ↗
18. New drug-eluting stents: an overview on biodegradable and polymer-free next-generation stent systems
19. Local delivery of antiproliferative agents via stents10.3390/polym6030755 ↗
20. Polymers, drug release, and drug‐eluting stents10.1111/j.1540-8183.2006.00198.x ↗
21. Self‐assembled multilayered coatings with multiple cyclic self‐healing capability, bacteria killing, osteogenesis, and angiogenesis properties on magnesium alloys
22. Mechanisms of controlled drug release from drug-eluting stents10.1016/j.addr.2006.01.016 ↗
23. Improvement of osteogenesis by a uniform PCL coating on a magnesium screw for biodegradable applications
24. Recent developments in biodegradable synthetic polymers10.1016/S1387-2656(06)12009-8 ↗
25. Enhancing corrosion resistance and osteogenic differentiation via a layered double hydroxide/nano-hydroxyapatite/silane composite coating on AZ31 magnesium alloy10.1016/j.porgcoat.2025.109755 ↗
26. Effects of fiber engraving laser on metallurgical, surface topography, and corrosion properties of AZ80 magnesium-based alloy10.1016/j.apsadv.2025.100695 ↗
27. Research on microstructure and corrosion resistance of hypoeutectic Al-5Mg-2Si-xMn alloys based on machine learning
28. Synergistic engineering of strength, ductility, and corrosion resistance in 316 austenitic stainless steel via cryogenic rolling and tailored annealing10.1016/j.matchar.2025.115395 ↗
29. Effect of electrodeposition parameters on the morphology and corrosion resistance of a FeCoNiCr medium-entropy alloy coating on a conductive Al alloy surface10.1016/j.mtcomm.2025.114367 ↗
30. Effect of electropolishing parameters of WE43 magnesium alloy on corrosion resistance of artificial plasma10.1016/j.jmrt.2023.08.189 ↗
31. Biocompatibility and corrosion resistance of drug coatings with different polymers for magnesium alloy cardiovascular stents10.1016/j.colsurfb.2024.114202 ↗
32. Controlled growth of monodisperse silica spheres in the micron size range10.1016/0021-9797(68)90272-5 ↗
33. In vitro investigation of biodegradable polymeric coating for corrosion resistance of Mg-6Zn-Ca alloy in simulated body fluid10.1016/j.msec.2014.05.035 ↗
34. Poly-L-lysine/poly-L-glutamic acid-based layer-by-layer self-assembled multilayer film for nitric oxide gas delivery10.1016/j.jiec.2018.09.005 ↗
35. Degradation behavior and mechanical strength of mg-zn-ca bulk metallic glass composites with Ti particles as biodegradable materials10.1016/j.jallcom.2017.01.010 ↗
36. Biological evaluation of medical devices—Part 5: tests for in vitro cytotoxicity
37. Chemical imaging of surfaces with the scanning electrochemical microscope10.1126/science.254.5028.68 ↗
38. A SECM study of redox activity on Al-Mg-Si alloy in organic/aqueous solution10.1016/j.jallcom.2021.161596 ↗
39. Low loading ORR selectivity evaluation of Pt-free catalysts with scanning electrochemical microscopy10.1016/j.elecom.2023.107538 ↗
40. Measurement of water profiles released from composite material by using the SECM technique10.1016/j.electacta.2023.142952 ↗
41. Simulated and measured response of oxygen SECM-measurements in presence of a corrosion process10.1016/j.electacta.2014.09.010 ↗
42. Investigation of carboxylic acid-neodymium conversion films on magnesium alloy10.1007/s11665-014-1263-6 ↗
43. Rare earth-based conversion coatings under scrutiny: a comprehensive review10.1016/j.jre.2024.07.002 ↗
44. Role of zirconium conversion coating in corrosion performance of aluminum alloys: an integrated first-principles and multiphysics modeling approach10.1016/j.electacta.2022.141195 ↗
45. C.-H. Tu, T.-C. Chen, T.-Y. Yung, C.-H. Lin, C.-S. Lin, Corrosion Resistance of Organic Coating Systems on Aluminium Alloy 7075-T6 with Silicate and Tungstate Modified Zirconium Conversion Layers, Available at: SSRN 6056396, DOI.
46. Gradients in surface nanotopography used to study platelet adhesion and activation10.1016/j.colsurfb.2013.04.010 ↗
47. Research on the anti-corrosion performance of copper-nickel alloy with different microstructures in stimulated Ocean medium10.1007/s11665-025-12798-8 ↗
48. Corrosion mechanism and hydrogen evolution on Mg10.1016/j.cossms.2014.09.005 ↗
49. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
50. Review of recent developments in the field of magnesium corrosion10.1002/adem.201400434 ↗
51. Oxidation behavior and corrosion resistance of CoCrFeNi high entropy alloy compared with FeCoNi medium entropy alloy10.1016/j.matchemphys.2024.129758 ↗