journal article·2026-09

High-temperature carbonized PVC/RM (red mud) composite material for self-supplying NaCl electrolyte for supercapacitors

Yujing Guo, Yuzhuo Hu, Mengxuan Zhang, Huawei Zhou

Publisher page

Abstract

Red mud (RM) is an industrial waste with high alkalinity and high corrosiveness. Appropriately removing the alkalinity from RM is crucial for the reuse and application of RM. This study attempts to composite RM with polyvinyl chloride (PVC) for self-supplying NaCl electrolyte for supercapacitors. The carbon structure and chemical state of Fe in RM/PVC composites after carbonization at different temperatures were studied. The results show that, compared with RM, the content of Fe 2+ in RM/PVC composites at 800 ℃ increased. The carbon in RM/PVC composites at 800 ℃ includes disordered and graphite carbon. Surprisingly, the specific capacitance of RM/PVC(1:1.67)-800 (1.59 F/g) under GCD test (5 mA/g) is two to three orders of magnitude higher than that of RM (1.7 mF/g) and PVC-800 (2.5 mF/g). It is worth noting that the electrolyte solution of this supercapacitor is 2 NaCl derived from the reaction between the alkalinity in RM and HCl generated from PVC during the high-temperature carbonization process, which improves the safety and environmental friendliness of RM utilization. Therefore, in this work, the industrial waste RM was ingeniously combined with PVC to turn waste into treasure, thus paving the way for the development of using RM.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bauxite Residue and Utilization · Layered Double Hydroxides Synthesis and Applications · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Applications of red mud as an environmental remediation material: a review10.1016/j.jhazmat.2020.124420 ↗
2. Innovative utilization of red mud through co-roasting with coal gangue for separation of iron and aluminum minerals10.1016/j.jiec.2021.03.038 ↗
3. Environment assessment of modified red mud utilized in roadbed10.3390/buildings14072135 ↗
4. Value adding red mud waste: impact of red mud composition upon fluoride removal performance of synthesised akaganeite sorbents10.1016/j.jece.2018.02.048 ↗
5. Utilization of red mud, slag and waste drilling fluid for the synthesis of slag-red mud cementitious material10.1016/j.jclepro.2019.117902 ↗
6. Ex-situ and in-situ catalytic pyrolysis of naomaohu coal with red mud-modified char and red mud leaching solution10.1016/j.joei.2024.101712 ↗
7. Correlation of the atomic structure, magnetic properties and microwave characteristics in substituted hexagonal ferrites10.1016/j.jmmm.2018.05.006 ↗
8. Effect of gallium doping on electromagnetic properties of barium hexaferrite10.1016/j.jpcs.2017.07.014 ↗
9. Carbon nanotube- and graphene-based nanomaterials and applications in high-voltage supercapacitor: a review10.1016/j.carbon.2018.10.010 ↗
10. Fabrication, characterization, and applications of hard carbons: a comprehensive review10.1016/j.jpowsour.2025.237674 ↗
11. Nanoscale precision welding-enabled quasi-3D conductive carbon blacks for fast-charging and long-lasting secondary batteries10.1016/j.carbon.2024.119688 ↗
12. Peculiarities of the microwave properties of hard–soft functional composites SrTb0.01Tm0.01Fe11.98O19–AFe2O4 (A = Co, Ni, Zn, Cu, or Mn)10.1039/D0RA05087C ↗
13. Magnetic anisotropy of the graphite nanoplatelet–epoxy and MWCNT–Epoxy composites with aligned barium ferrite filler10.1007/s10853-017-0776-4 ↗
14. An overview on the recycling of waste poly(vinyl chloride)10.1039/D3GC02585C ↗
15. Electrochemical deposition regimes and critical influence of organic additives on the structure of Bi films10.1016/j.jallcom.2017.11.329 ↗
16. Eu3+-induced passivation and charge-transport modulation in Cs2FeCl5·H2O single crystals and evaporated thin films for photodetectors10.1039/D5CP04307G ↗
17. Co-pyrolysis of biomass with red mud: an efficient approach to improving bio-oil quality and resourceful utilization of the iron in red mud10.1016/j.fuel.2023.129482 ↗
18. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni10.1016/j.apsusc.2010.10.051 ↗
19. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
20. Effects of carbonization conditions on structure and gas adsorption of carbon membranes derived from polyvinyl chloride10.1002/slct.201903637 ↗
21. Influence of oxygen vacancies on the magnetic and electrical properties of La1-xSrxMnO3-x/2manganites10.1140/epjb/e2004-00357-8 ↗
22. Magnetic properties of the nonstoichiometric Sr‐doped manganites10.1002/pssb.200402143 ↗