Intrinsic latent heat of the metal-insulator transition in W-doped VO2
Source abstract
Abstract
Solid-state phase-change materials (PCMs) are of considerable interest as alternatives to conventional solid-liquid systems because they can provide a thermal response while mitigating issues such as leakage and large volume changes. VO2 is particularly attractive in this regard because it exhibits a metal-insulator transition (MIT) near room temperature, accompanied by pronounced structural, electrical, magnetic, and thermal changes. Here, we investigate the doping-dependent evolution of the MIT in W-doped VO2 powders, with particular emphasis on the associated thermodynamic response relevant to functionalities based on a solid-state phase-change. Structural, magnetic, electrical, and thermal properties were characterized by X-ray diffraction, magnetization, electrical resistivity, and differential scanning calorimetry, respectively. The transition temperature decreases systematically from approximately 340 K for undoped VO2 to about 299 K for the 1.5 at% W-doped sample. Despite this substantial suppression of the transition temperature, the volumetric latent heat remains relatively large, decreasing from 237.3 to 161.8 kJ/L, which is higher than those of representative solid-solid PCMs such as NiTi and neopentyl glycol. Meanwhile, the corresponding transition entropy change (ΔS ) decreases from 1.52 to 1.18 kB/VO2. Compared with representative phase-change materials, VO2 occupies a distinctive region that combines near-room-temperature operation and relatively high thermal conductivity, giving rise to the practical advantages of utilizing a solid-state transition. These results demonstrate that W doping enables effective tuning of the MIT temperature while retaining a substantial intrinsic thermodynamic response, underscoring the promise of VO2 as a viable solid-state phase-change material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Thermal Expansion and Ionic Conductivity · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
2. Solar energy storage using phase change materials10.1016/j.rser.2006.05.005 ↗
3. Cycle test stability and corrosion evaluation of phase change materials used in thermal energy storage systems10.1016/j.est.2021.102664 ↗
4. Review on the methodology used in thermal stability characterization of phase change materials10.1016/j.rser.2015.04.187 ↗
5. Oxides which show a metal-to-insulator transition at the neel temperature10.1103/PhysRevLett.3.34 ↗
6. Electronic properties of VO2 near the semiconductor-metal transition10.1103/PhysRev.185.1022 ↗
7. The two components of the crystallographic transition in VO210.1016/0022-4596(71)90091-0 ↗
8. Influence of strain on latent heat of VO2 ceramics10.1016/j.jallcom.2018.04.094 ↗
9. Metal–insulator transition of VO2 thin films grown on TiO2 (001) and (110) substrates10.1063/1.1446215 ↗
10. Suppression of metal-insulator transition in VO2 by electric field-induced oxygen vacancy formation10.1126/science.1230512 ↗
11. Phase transition and IR properties of tungsten-doped vanadium dioxide nanopowders10.1016/j.jallcom.2009.01.092 ↗
12. Origin of the transition entropy in vanadium dioxide10.1103/PhysRevB.99.064113 ↗
13. Size-dependent crystal transition thermodynamics of Nano-VO2 (M)10.1021/acs.jpcc.8b01183 ↗
14. Synthesis and thermal stability of W-doped VO2 nanocrystals10.1016/j.materresbull.2011.06.030 ↗
15. A simple method to prepare V1-xWxO2 (x = 0, 0.01, 0.02, 0.03, 0.04, and 0.05) controllable phase transition temperature powder10.1016/j.jallcom.2017.03.081 ↗
16. Microwave-assisted synthesis of nanoscale VO2 structures
17. Insights into the phase transition behavior of thermochromic VO2 (M1) powders doped with Tungsten10.1016/j.apt.2025.104857 ↗
18. Electron correlations and electron-lattice interactions in the metal-insulator, ferro-elastic transition in VO2: a thermodynamical study10.1103/PhysRevB.22.5284 ↗
19. Phase transition performance recovery of W-doped VO2 by annealing treatment10.1088/2053-1591/aacd8c ↗
20. Reactivity of vanadium nanoparticles with oxygen and tungsten10.3390/nano12091471 ↗
21. Combined effect of temperature induced strain and oxygen vacancy on metal‐insulator transition of VO2 colloidal particles10.1002/adfm.202005311 ↗
22. Thermophysical characterization of MgCl2∙6H2O, Xylitol and Erythritol as Phase Change Materials (PCM) for Latent Heat Thermal Energy Storage (LHTES)10.3390/ma10040444 ↗
23. Solid-state thermal energy storage using reversible martensitic transformations10.1063/1.5087135 ↗
24. External stimulation-controllable heat-storage ceramics10.1038/ncomms8037 ↗
25. Preparation and characterization of solid-state neopentyl glycol/expanded graphite micro composite for thermal energy storage applications10.1016/j.matpr.2020.11.403 ↗
26. Experimental Study on paraffin wax and Soya wax supported by high-density polyethylene and loaded with nano-additives for thermal energy storage10.3390/en17112461 ↗
27. Measurement of the hysteretic thermal properties of W-doped and undoped nanocrystalline powders of VO210.1038/s41598-019-51162-4 ↗
28. Review on solid-solid phase change materials for thermal energy storage: molecular structure and thermal properties10.1016/j.applthermaleng.2017.08.161 ↗
29. Recent developments in solid-solid phase change materials for thermal energy storage applications10.1016/j.est.2024.111570 ↗