journal article·2026-09

Process development of a NiTi–NiAl bronze functionally graded cavitation-resistant coating via high-speed laser-directed energy deposition for hydraulic machinery repair

Jiaxuan Li, Yao Kong, Herong Ma, Fulai Liu, Simin Liu, Lei Chen, Zongde Liu

Publisher page

Abstract

To address the severe cavitation-induced damage and repair demands of hydraulic machinery components, a NiTi–NiAl bronze composite coating was fabricated by high-speed laser-directed energy deposition for cavitation-resistant protection and restoration. A multi-metric assessment encompassing oxygen content, micromechanical properties, and residual stress was conducted to clarify how processing parameters regulate coating performance. Elemental interdiffusion at the composite coating interface was characterized by EPMA and TEM. Furthermore, by combining CFD simulations with cavitation jet erosion experiments, the transient evolution of cavity nucleation and collapse in the cavitation flow field was captured, and the cavitation erosion damage mechanism of the NiTi alloy coating was revealed. The results show that the optimized coating exhibits low porosity and oxygen content, along with outstanding microscale deformation resistance and elastic recovery. Pronounced elemental interdiffusion across the bonding interface further ensures robust metallurgical bonding. Additionally, the Ni4Ti3-rich precipitates in the NiTi alloy coating impede dislocation motion and suppress plastic deformation, thereby improving the coating strength and resistance to deformation, which contributes to its outstanding cavitation erosion resistance. Finally, the composite coating was successfully applied to repair damaged needles in Pelton turbine units, demonstrating its feasibility and engineering potential for hydraulic machinery repair and cavitation protection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Science · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. A comprehensive study on the flow field of cylindrical cavitation nozzle jet under different turbulence models10.1016/j.oceaneng.2024.119596 ↗
2. Cavitation erosion behavior and anti-cavitation erosion mechanism of NiTi alloys impacted by water jet
3. Optimization design and interface characteristics research of high damping NiTi - nickel-aluminum bronze functional gradient composite coating additively manufactured by high-speed laser-directed energy deposition10.1016/j.surfcoat.2024.131280 ↗
4. An epoxy-modified polyurethane composite coating with repetitive self-healing function for anti-cavitation, anticorrosion, and antifouling applications10.1016/j.cej.2023.146849 ↗
5. Cavitation erosion behavior of nitinol coating sealed by epoxy resin10.1002/mawe.202000102 ↗
6. Cavitation erosion of NiTi explosively welded to steel10.1016/0043-1648(94)07029-6 ↗
7. Cavitation and high-velocity slurry erosion resistance of welded stellite 6 alloy10.1016/j.triboint.2011.10.003 ↗
8. Erosion wear performance of WC-10Co4Cr and Cr3C2-25NiCr coatings sprayed with high-velocity thermal spray processes10.1016/j.surfcoat.2019.04.067 ↗
9. Slurry and cavitation erosion resistance of thermal spray coatings10.1016/j.wear.2009.01.018 ↗
10. The critical role of liquid surface tension in determining cavitation erosion and dry wear performance of WC-17Co coatings produced by cold spray technology10.1016/j.triboint.2025.110609 ↗
11. Synthesis of durable hydrophobic fluorinated polyurethanes with exceptional cavitation erosion resistance10.1016/j.triboint.2022.107973 ↗
12. Study on cavitation erosion mechanism of ultra-high molecular weight polyethylene (UHMWPE) and polytetrafluoroethylene (PTFE)10.1080/10402004.2024.2428692 ↗
13. Microstructure and phase transformation of nickel-titanium shape memory alloy fabricated by directed energy deposition with in-situ heat treatment10.1016/j.jallcom.2021.162896 ↗
14. Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting10.1016/j.matdes.2022.110886 ↗
15. In-situ synthesis of high-quality pseudoelastic NiTi alloys with intrinsic Ni4Ti3 phase precipitation using laser DED10.1016/j.jmapro.2021.12.029 ↗
16. Laser directed energy deposition of NiTi shape memory alloys with herringbone grain architectures for enhanced ductility and superelasticity10.1016/j.matdes.2025.115355 ↗
17. Influence of TiC powder content on wear behaviour of inconel 625 clads developed by hybrid-mode wire arc additive manufacturing (WAAM) on EN-8 steel10.1016/j.triboint.2023.108937 ↗
18. Investigating wear performance of EN8 steel cladded with AISI316 steel using the WAAM-CMT process10.1177/09544062251342066 ↗
19. Investigating wear characteristics of inconel 625 and VC-Based claddings on EN8 steel developed by WAAM10.1007/s11665-025-10829-y ↗
20. A study of cavitation erosion in artificial submerged water jets10.3390/app14114804 ↗
21. Solid particle erosion behavior and failure mechanism of medium-entropy AlCrTiSiN coatings10.1016/j.triboint.2026.111775 ↗
22. Influence of a Nb interlayer on the oxidation behavior of a Cr coating deposited on inconel 718 alloy substrate10.1016/j.jmrt.2025.11.197 ↗
23. RSM investigation of dry abrasion in WAAM fabricated inconel 625 cladding on EN8 steel10.1007/s40964-025-01473-y ↗
24. Optimizing wear performance in vanadium-carbide-reinforced AISI316 composite claddings via wire arc additive manufacturing10.1007/s11665-025-11312-4 ↗
25. Laser‐directed energy deposition additive manufacturing of nickel–titanium coatings: deposition morphology, microstructures, and mechanical properties10.1002/adem.202200965 ↗
26. Comparing corrosion behavior of additively manufactured Cr-rich stainless steel coating between conventional and extreme high-speed laser metal deposition10.1016/j.corsci.2021.109976 ↗
27. Comparative study on the corrosion behaviour of 1.4529 super austenitic stainless steel and laser-cladding 1.4529 coating in simulated desulfurized flue gas condensates10.1016/j.corsci.2022.110794 ↗
28. Laser powder bed fusion of defect-free NiTi shape memory alloy parts with superior tensile superelasticity10.1016/j.actamat.2022.117781 ↗
29. Ni-based coating on 5083 aluminum alloy with Cu-Ni interlayer fabricated by ultra-high-speed laser directed energy deposition10.1016/j.surfcoat.2023.130068 ↗
30. Nelwalani · 2014
31. Effect of nozzle geometry on a standard cavitation erosion test using a cavitating jet10.1016/j.wear.2012.11.008 ↗
32. Numerical investigation of submerged cavitation jet based on stress-blended eddy simulation10.1007/s12206-024-1028-6 ↗
33. Characterization of cavitation fields from measured pressure signals of cavitating jets and ultrasonic horns10.1115/1.4024263 ↗
34. Multiphase flow dynamics analysis in jet cavitation nozzles: a novel approach for optimizing oily sludge treatment efficiency10.1016/j.cjph.2025.07.003 ↗
35. Research on cavitation involved in ultrasonic-assisted abrasive waterjet machining10.1007/s00170-018-3103-6 ↗
36. Standard Practice for Liquid Penetrant Testing for General Industry, (n.d.). https://www.astm.org/e0165_e0165m-18.html (accessed December 1, 2024).
37. Multi-objective optimization of process parameters for laser metal deposition of NiTi shape memory alloy based on neural network and genetic algorithm10.1007/s00170-024-12974-5 ↗
38. Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants, (n.d.). https://www.astm.org/f2063-18.html (accessed December 2, 2024).
39. Ultrasonic vibration-assisted laser directed energy deposition in-situ synthesis of NiTi alloys: effects on microstructure and mechanical properties10.1016/j.jmapro.2020.10.058 ↗
40. Studies on the 316/NiTi functionally gradient ultra-thick coatings fabricated with directed energy deposition: microstructure, crystallography and wear mechanism10.1016/j.apsusc.2023.157497 ↗
41. Oxidation resistant FeCoNiCrAl high entropy alloy/AlSi12 composite coatings with excellent adhesion on Ti-6Al-4 V alloy substrate via mechanical alloying and subsequent laser cladding10.1016/j.surfcoat.2023.129577 ↗
42. Effects of grain refinement on the microstructures and damping behaviors of a cu–al–ni–mn–ti shape memory alloy10.1016/j.intermet.2021.107315 ↗
43. Effect of heat treatment on microstructure, corrosion, and shape memory characteristics of laser deposited NiTi alloy10.1016/j.jallcom.2018.01.174 ↗
44. Fabrication of NiTi through additive manufacturing: a review10.1016/j.pmatsci.2016.08.001 ↗
45. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
46. Microstructure and mechanical properties of NiTi shape memory alloys by in situ laser directed energy deposition
47. Effect of nano-scaled precipitates on shape memory behavior of Ti-50.9at.%Ni alloy10.1016/j.actamat.2005.06.009 ↗
48. Formation mechanism of inherent spatial heterogeneity of microstructure and mechanical properties of NiTi SMA prepared by laser directed energy deposition10.1088/2631-7990/acd96f ↗
49. Microstructure and the anti-cavitation behavior of laser cladded cobalt-based coating in sand-water mixtures with different sand grain size
50. Study on thermal expansion of intermetallics in multicomponent Al–Si alloys by high temperature X-ray diffraction10.1016/j.intermet.2010.05.015 ↗
51. Effects of jet impact angle on cavitation erosion intensity and cavitation cloud dynamics10.1016/j.oceaneng.2024.119832 ↗
52. Investigation on unsteady flow characteristics of an artificial-submerged cavitating jet based on the LES approach10.1016/j.oceaneng.2024.119989 ↗
53. Numerical investigation of a high-pressure submerged jet using a cavitation model considering effects of shear stress10.3390/pr7080541 ↗
54. Research on erosion effect of various submerged cavitating jet nozzles and design of self-rotating cleaning device10.3390/app14041433 ↗
55. Numerical investigation about the unsteady behavior of a free submerged cavitation jet using the SBES approach10.1016/j.oceaneng.2023.115010 ↗
56. Influence of mechanical properties on cavitation-erosion via cavitating jet10.1016/j.triboint.2025.110754 ↗
57. Cavitation erosion resistant nickel-based cermet coatings for monel K-50010.1016/j.triboint.2021.106954 ↗
58. Experimental study on the cavitation erosion resistance of 17-4PH under the structure of hundred-micron array grooves on the surface10.1016/j.triboint.2025.110751 ↗
59. Cavitation erosion behavior of GH 4738 nickel-based superalloy
60. Behavior of the hard phases of copper alloys subjected to cavitation erosion investigated by SEM observation10.1016/j.triboint.2022.107771 ↗
61. Commentary on using H/E and H/E as proxies for fracture toughness of hard coatings10.1016/j.tsf.2019.04.040 ↗
62. Relationship between the superelasticity and strain field around Ni4Ti3 nano-precipitates in NiTi shape memory alloy via laser powder bed fusion10.1016/j.jmapro.2024.08.023 ↗
63. Cavitation erosion–corrosion characteristics of laser surface modified NiTi shape memory alloy10.1016/S0257-8972(02)00399-7 ↗
64. Cavitation erosion behaviors and damage mechanism of Ti-Ni alloy impacted by water jet with different standoff distances10.1016/j.engfailanal.2022.106458 ↗
65. Excellent damping properties and their correlations with the microstructures in the NiTi alloys fabricated by laser-directed energy deposition10.1016/j.jmapro.2022.10.047 ↗
66. A comparative study in machining of AISI D2 steel using textured and non-textured coated carbide tool at the flank face10.1016/j.jmapro.2018.10.041 ↗