In-situ synthesized cBN reinforced M3AX2 phase composites
Source abstract
Abstract
In this study, high-purity cubic boron nitride (cBN) added in-situ synthesized silicon carbide/titanium silicon carbide (SiC/Ti3SiC2) composite materials were successfully fabricated via Spark Plasma Sintering (SPS) method for the first time. The influence of sintering parameters on phase evolution, mechanical properties and tribological performance was systematically investigated. It was determined that a sintering temperature of 1350 °C at 50 MPa provides the optial balance for Ti3SiC2 stability; whereas increasing the pressure accelerates diffusion kinetics, shifting the system toward thermodynamic equilibrium and promoting the transformation of the MAX phase into more persistent secondary phases. The incorporation of even 5 wt% cBN significantly enhanced the mechanical properties, resulting in a Vickers hardness of 10.86 ± 0.59 GPa, which represents a 48% increase compared to the monolithic matrix. Tribological evaluations revealed that the 15 wt% cBN composite achieved a minimum wear rate of 1.58 × 10−5 mm3/Nm, accounting for an 87.75% reduction relative to the SiC/Ti3SiC2 matrix. These results highlight the critical interplay between pressure-induced diffusion and thermodynamic stability in tailoring the performance of ultra-hard MAX phase composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Boron and Carbon Nanomaterials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Processing of MAX phases: from synthesis to applications10.1111/jace.17544 ↗
2. The MAX phases: unique new carbide and nitride materials10.1511/2001.28.334 ↗
3. Synthesis and characterization of a remarkable ceramic: Ti3SiC210.1111/j.1151-2916.1996.tb08018.x ↗
4. The Mn+1AXn phases: a new class of solids; thermodynamically stable nanolaminates10.1016/S0079-6786(00)00006-6 ↗
5. Mechanical properties of the MAX phases10.1146/annurev-matsci-062910-100448 ↗
6. Solid-state synthesis and characterization of the ternary phase Ti3SiC210.1007/BF00352037 ↗
7. Influence of SPS parameters on the density and mechanical properties of sintered Ti3SiC2 powders10.1016/j.ijrmhm.2013.01.016 ↗
8. Rationally designed multifunctional Ti3C2 MXene@Graphene composite aerogel integrated with bimetallic selenides for enhanced supercapacitor performance and overall water splitting10.1016/j.electacta.2022.141103 ↗
9. Barsoum · 2013 · 43610.1002/9783527654581 ↗
10. Tribological behavior of spark plasma sintered Ti3SiC2 MAX phase composites10.1016/j.triboint.2025.111235 ↗
11. Development of Ti3SiC2 MAX phase tubular structures for solar receiver applications10.1016/j.solener.2024.112907 ↗
12. Composition-driven fast hot-pressed sintering with short dwell time and mechanistic elucidation of high-purity Ti3SiC2 MAX phase10.1016/j.matchemphys.2026.132233 ↗
13. Cubic boron nitride competing with diamond as a superhard engineering material – an overview10.1016/j.jmrt.2013.03.004 ↗
14. Transformation of boron nitride from cubic to hexagonal under 1-atm helium10.1016/j.diamond.2020.108078 ↗
15. A new synthesis reaction of Ti3SiC2 from Ti/TiSi2/TiC powder mixtures through pulse discharge sintering (PDS) technique10.1007/s10019-002-8644-4 ↗
16. Rapid synthesis of dense Ti3SiC2 by spark plasma sintering10.1016/S0955-2219(02)00021-3 ↗
17. Cavaliere · 2019
18. Optimization of the Ti3SiC2 MAX phase synthesis10.1016/j.ijrmhm.2012.05.001 ↗
19. Reaction mechanism in Ti–SiC–C powder mixture during pulse discharge sintering10.1016/j.ceramint.2009.11.018 ↗
20. Synthesis and some properties of Ti3SiC2 by hot pressing of titanium, silicon, and carbon powders Part 1 – effect of starting composition on formation of Ti3SiC2 and observation of Ti3SiC2 crystal morphology10.1179/026708303225006079 ↗
21. Synthesis and reaction mechanism of Ti3SiC2 by mechanical alloying of elemental Ti, Si and C powders10.1111/j.1551-2916.2005.00417.x ↗
22. Effects of sintering temperature and Si content on the purity of Ti3SiC2 synthesized from Ti/Si/TiC powders10.1016/S0925-8388(02)01171-4 ↗
23. Reaction sintering phenomena of selfpropagating high temperature synthesis derived ceramic powders in the Ti-Si-C system
24. A new synthesis reaction of Ti3SiC2 from Ti/TiSi2/TiC powder mixtures through pulse discharge sintering (PDS) technique10.1007/s10019-002-8644-4 ↗
25. A new synthesis reaction of Ti3SiC2 through pulse discharge sintering Ti/SiC/TiC powder10.1016/S1359-6462(01)01184-8 ↗
26. Synthesis reactions for Ti3SiC2 through pulse discharge sintering TiH2/Si/TiC powder mixture10.1016/j.materresbull.2007.04.028 ↗
27. Reviewing the effects of different additives on the synthesis of the Ti3SiC2 MAX phase by mechanical alloying technique10.1016/j.ijrmhm.2016.08.003 ↗
28. Evaluation of properties of spark plasma sintered Ti3SiC2 and Ti3SiC2/SiC composites10.1016/j.ceramint.2019.03.144 ↗
29. Synthesis and properties of TiB2/Ti3SiC2 composites10.1016/j.ceramint.2020.09.098 ↗
30. cBN–Ti3SiC2 composites10.1016/j.diamond.2003.12.029 ↗
31. Investigation of MAX phase/c-BN composites10.1016/j.ceramint.2012.10.279 ↗
32. Synthesis and characterization of novel Ti3SiC2–cBN composites10.1016/j.diamond.2014.01.008 ↗
33. Controllable HTHP sintering and property of cBN/diamond composites containing Ti3SiC210.1016/j.ceramint.2020.02.170 ↗
34. Precipitate and dislocation regulation of laser melting deposited AlMgScZr alloy by cryogenic treatment with subsequent aging
35. Stiff yet tough, moisture-tolerant, room temperature self-healing and thermoconductive biomimetic nanocomposites10.1002/adma.202507548 ↗
36. Synthesis of Ti3SiC2 from TiC and Si and its toughening mechanism with incorporated carbon fibers10.1016/j.ceramint.2021.06.038 ↗
37. Concolidation/Synthesis of materials by electric current activated/assisted sintering10.1016/j.mser.2008.09.003 ↗
38. Fast low-temperature consolidation of bulk nanometric ceramic materials10.1016/j.scriptamat.2005.11.015 ↗
39. Liang · 1993 · 417
40. SPS parameters influence on Ti3SiC2 formation from Si/TiC: mechanical properties of the bulk materials10.1016/j.jallcom.2017.02.304 ↗
41. Cubic boron nitride competing with diamond as a superhard engineering material – an overview10.1016/j.jmrt.2013.03.004 ↗
42. Thermal properties of Ti3SiC210.1016/S0022-3697(98)00313-8 ↗
43. Hsu · 2001 · 1760
44. On the tribology of the MAX phases and their composites during dry sliding:a review”10.1016/j.wear.2011.01.043 ↗
45. Understanding the fretting wear of Ti3SiC2”10.1016/j.jeurceramsoc.2005.05.006 ↗
46. Hutchings · 2017
47. Transactions and communications10.1002/jctb.5000630501 ↗
48. Kubaschewski · 1967 · 208
49. Boron ignition and combustion with doped δ-Bi2O3: bond energy/oxygen vacancy relationships10.1016/j.combustflame.2018.07.015 ↗
50. Tribological behaviour of self-lubricating materials at high temperatures10.1080/09506608.2017.1410944 ↗
51. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗