journal article·2026-09Open access

Enhancing dielectric and mechanical performance of polyimide-based composites with APTES-modified SiO2 nanofillers

Amit Kumar Singh, Jared Ericksen, Nicholas Pagliocca, Behrad Koohbor, Lei Yu, Wei Xue

Abstract

Polyimide (PI) is recognized as a highly promising dielectric material for high-temperature superconductor (HTS) power transmission cables, owing to its excellent insulation properties, thermal stability, and mechanical properties. To improve its performance, this study explores PI-based nanocomposites incorporating 3-aminopropyltriethoxysilane (APTES)-functionalized SiO 2 nanoparticles to enhance dielectric and mechanical performance. Five compositions were synthesized, including pristine PI and PI with 2, 4, 6, and 8 wt.% APTES-modified SiO 2 nanofillers. The nanocomposites were fabricated by controlled thermal imidization to ensure maximum conversion from polyamic acid (PAA) to PI and strong filler-matrix adhesion. Comprehensive characterization was carried out to evaluate the dielectric and mechanical performance of the prepared nanocomposites. Scanning electron microscopy (SEM) was used to analyze the surface morphology of post-breakdown samples, while Fourier-transform infrared spectroscopy (FTIR) confirmed the successful imidization from PAA to PI. The PI/4 wt.% APTES-coated SiO 2 nanocomposite possessed a DC dielectric strength of 298.2 kV/mm at room temperature (RT) and 408.2 kV/mm at 93 K, both of which were significantly higher than those of sol-gel-derived SiO 2 composites. Incorporating APTES-modified SiO 2 resulted in improvements of ∼85.2% at RT and ∼52.4% at 93 K compared to their sol-gel SiO 2 counterparts. In addition, the PI/4 wt.% APTES-SiO 2 composite showed enhanced mechanical properties relative to pure PI. These results are attributed to the strong interaction between the silica particles and the polymer enabled by the APTES coating, which improved the material’s ability to withstand electrical field stress and reduced trapped charge buildup.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Dielectric materials and actuators · Synthesis and properties of polymers · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. PMMA nanocomposite based cryogenic dielectrics for high-temperature superconducting (HTS) cables
2. High-temperature superconducting cable technology and development trends
3. Temperature-dependent dielectric properties of polyimide (PI) and polyamide (PA) nanocomposites10.1109/TNANO.2021.3098233 ↗
4. Dielectric breakdown in silica-amorphous polymer nanocomposite films: the role of the polymer matrix10.1021/am4005623 ↗
5. Recent progress on ferroelectric polymer-based nanocomposites for high energy density capacitors: synthesis, dielectric properties, and future aspects10.1021/acs.chemrev.5b00495 ↗
6. High density polyethylene (HDPE) clay nanocomposite for dielectric applications10.1109/TDEI.2009.5128526 ↗
7. Dielectric and conduction properties of polyimide films
8. Mechanical and dielectric properties of polyimide/silica nanocomposite films10.1080/14658011.2015.1104087 ↗
9. Synthesis and cryogenic properties of polyimide–silica hybrid films by sol-gel process10.1016/j.polymer.2005.07.012 ↗
10. Polyimide nanocomposites with functionalized SiO2 nanoparticles: enhanced processability, thermal and mechanical properties10.1039/C4RA04952G ↗
11. Electrical and thermal properties of polyimide/silica nanocomposite10.1080/17458080.2010.547950 ↗
12. Synthesis and characterization of polyimide/silica hybrid nanocomposites10.1002/app.20947 ↗
13. Effects of surface modification Nano-SiO2 and its combination with surfactant on interfacial tension and emulsion stability10.1016/j.colsurfa.2020.124682 ↗
14. Synthesis of novel silica-polyimide nanocomposite films using aromatic-amino modified silica nanoparticles: mechanical, thermal and morphological investigations10.3144/expresspolymlett.2015.44 ↗
15. Preparation and characterization of silica/polyimide nanocomposite films based on water-soluble poly(amic acid) ammonium salt10.1002/pc.23637 ↗
16. Polyimide nanocomposites filled with SiO2 nanoparticles of different sizes for high-temperature energy storage10.1021/acsanm.3c04700 ↗
17. Polymer nanocomposite dielectrics-the role of the interface10.1109/TDEI.2005.1511089 ↗
18. Sol-gel derived silica: a review of polymer-tailored properties for energy and environmental applications
19. Hydrophobic PI/SiO2 composites with excellent dielectric property and thermal stability via simple modification10.1016/j.compscitech.2024.110508 ↗
20. Polyhedral oligomeric silsesquioxane/polyamide bio-nanocomposite membranes: structure-gas transport properties10.1039/C4RA12716A ↗
21. Nanoparticles with various surface modifications as functionalized cross-linking agents for composite resin materials10.1016/j.compscitech.2012.03.024 ↗
22. The electrical performance of polyamide 66/Poly(vinylidene fluoride) with vinyl acetate-maleic anhydride copolymer
23. Effects of APTES-coated SiO2 nano-fillers on electrical, mechanical, and thermal properties of PAA-based composites for HTS cable insulation at cryogenic conditions10.1016/j.materresbull.2025.113772 ↗
24. Influence of different types of SiO2 nanoparticles in polyamic acid for enhanced dielectric and mechanical performance at room temperature
25. Extremely high dielectric breakdown field in Polyimide-Silica Nanocomposites functionalized with APTES ligand
26. Polyimide-Based nanocomposites with ultra-high dielectric breakdown strength: a review and new record10.1021/acsaelm.5c01479 ↗
27. Effects of material preparation in polyimide/SiO2 nanocomposites for low-temperature dielectric applications10.1109/TNANO.2021.3112255 ↗
28. Effect of nanosilica on the dielectric properties and thermal stability of polyimide/SiO2 nanohybrid10.1080/15685551.2012.747159 ↗
29. Preparation and characterization of polyimide-silica composite membranes and their derived carbon–silica composite membranes for gas separation
30. The effect of solvent to the kinetics of imidization of poly(amic acid)10.1016/j.polymer.2018.04.005 ↗
31. In situ FTIR analysis for the determination of imidization degree of polyimide precursors10.1016/j.polymer.2021.124416 ↗
32. Surface characterization of polyamic acid and polyimide films prepared by vapor deposition polymerization by using sum-frequency generation10.1021/la0106135 ↗
33. Synthesis and characterization of a novel versatile poly(amic acid) derived from ethylenediaminetetraacetic dianhydride10.1016/j.matchemphys.2010.06.061 ↗
34. DFT-Calculated IR spectrum amide I, II, and III band contributions of N-Methylacetamide fine components10.1021/acsomega.9b04421 ↗
35. Synthesis and characterization of polyimide/silica hybrid nanocomposites10.1021/cm980428l ↗
36. Characterization, properties, and processing of LaRC™ PETI-5 as a high-temperature sizing material. I. FTIR studies on imidization and phenylethynyl end-group reaction behavior10.1002/(SICI)1097-4628(20000411)76:2<190::AID-APP8>3.0.CO;2-8 ↗
37. Thermally Robust bendable silicon Dioxide/Polyimide layered composite film through catalytic fluorination10.1021/acsapm.9b00012 ↗
38. Preparation and properties of ternary polyimide/SiO2/polydiphenylsiloxane composite films10.1002/pi.2078 ↗