Influence of wetting agent architecture on the hydrophilicity of cured phenolic resin coatings
Source abstract
Abstract
Phenolic resins (PRs), widely used in different technological and practical fields, tend to have a limited hydrophilic character. For coating applications where hydrophilic properties are required, wetting agents (WAs) are typically added to the PRs formulations. The hydrophilicity is in this case strongly affected by the distribution of the WAs in the coating. This distribution depends on a delicate balance between miscibility and surface segregation. Phenol-urea-formaldehyde (PUF) and phenol-formaldehyde (PF) resins-based coatings, containing various types of WAs were studied to evaluate their effect on the coating’s hydrophilicity. The most important selection criterium for effective WAs for PRs coatings was found to be the chain length of alkyl and ethylene oxide groups in the WAs. Additionally, an anionic headgroup is beneficial to achieve both sufficient miscibility with PUF during the cure process and an increase in hydrophilicity of the resulting coatings. For PF resins anionic WAs can also be used without inducing de-mixing, provided that the ethylene oxide content of the WA is sufficiently large. These insights provide a framework for the selection or design of new WAs for improved wetting performance of phenolic resin coatings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Polymer Science and Applications · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. Phenolic resins: 100 years and still going strong10.1016/j.reactfunctpolym.2012.07.008 ↗
2. Phenolic resins: chemistry, reactions, mechanism
3. Novel phenolic resins with improved mechanical and toughness properties10.1002/app.34719 ↗
4. Preparation and properties of boron modified phenolic resin for automotive friction materials10.3390/ma18071624 ↗
5. Friction elements based on phenolic resin and slate powder10.1016/j.jmrt.2020.01.032 ↗
6. Thermal behavior of a phenolic resin for brake pad manufacturing10.1007/s10973-019-08004-2 ↗
7. Friction and wear studies on brake-pad materials based on newly developed resin10.1016/j.wear.2006.12.050 ↗
8. Decomposition of carbon/phenolic composites for aerospace heatshields: detailed speciation of phenolic resin pyrolysis products10.1016/j.ast.2021.107079 ↗
9. Carbon/Phenolic nanocomposites as advanced thermal protection material in aerospace applications
10. Enhanced thermal and mechanical properties of boron-modified phenolic resin composites with multifiller system for aerospace applications10.1007/s42114-024-00961-z ↗
11. Structural and thermal behavior of a novel phenolic resin and its composite with excellent ablative performance10.1016/j.cej.2024.151448 ↗
12. Improvement of physical and biological properties of particleboards by impregnation with phenolic resin10.1007/BF00225692 ↗
13. Research status, industrial application demand and prospects of phenolic resin10.1039/C9RA06487G ↗
14. Phenolic resin adhesives
15. Cure properties and adhesive performances of cure-accelerated phenol-urea-formaldehyde resins10.1007/s00107-010-0414-1 ↗
16. Birch wood surface characterization after treatment with modified phenol-formaldehyde oligomers10.3390/polym14040671 ↗
17. Mineral wool insulation binders
18. Tunable wettability of phenolic resin coatings10.1016/j.porgcoat.2024.108883 ↗
19. Surfactant effects in phenolic foam resins10.1177/0021955X8902500102 ↗
20. Effects of surfactants on the mechanical properties, microstructure, and flame resistance of phenol–urea–formaldehyde foam10.1007/s00289-015-1470-9 ↗
21. Ordered mesoporous phenolic resins: highly versatile and ultra stable support materials10.1016/j.cis.2012.03.007 ↗
22. Cuypers
23. Cuypers · 2016
24. Blaakmeer
25. Smithers
26. Weissenfels
27. Pilato
28. Myers · 2005
29. Preferential surface segregation of homopolymer and copolymer blend films10.1016/j.susc.2006.11.024 ↗
30. Surface segregation studies of fluorine-containing diblock copolymers10.1021/ma950544z ↗
31. Functionalizing polymer surfaces by field-induced migration of copolymer additives. 1. Role of surface energy gradients10.1021/ma001278e ↗
32. Functionalizing polymer surfaces by surface migration of copolymer additives: role of additive molecular weight10.1016/S0032-3861(02)00041-1 ↗
33. Phase segregation mechanisms of small molecule-polymer blends unraveled by varying polymer chain architecture10.1002/smm2.1036 ↗
34. Early-stage compositional segregation in polymer-blend films10.1103/PhysRevE.67.061801 ↗
35. Phase separation of ternary mixtures: Symmetric polymer blends10.1021/ma00128a005 ↗
36. Enhancing surface segregation with cyclic polymer additives: a facile approach to surface modification10.1016/j.eurpolymj.2024.112759 ↗
37. Association and segregation in aqueous polymer/polymer, polymer/surfactant, and surfactant/surfactant mixtures: similarities and differences10.1016/0001-8686(92)80011-L ↗
38. Polymerization-induced phase segregation and self-assembly of siloxane additives to provide thermoset coatings with a defined surface topology and biocidal and self-cleaning properties10.3390/nano9111610 ↗
39. Novel methods of producing low-reflectance coatings utilizing synergistic effects of polymer phase separation10.1021/acsami.6b06037 ↗
40. Molecular design of functional polymer surfaces10.1002/polb.20157 ↗
41. Phase separation in benzoxazine/epoxy resin blending systems10.1038/pj.2012.179 ↗
42. Phase separation of phenolic resins2. The fractionation of phenol-formaldehyde resin based on molecular weight and structure10.1007/s002890050225 ↗
43. Polymerization induced viscoelastic phase separation of porous phenolic resin from solution10.1002/pi.5147 ↗
44. Phase separation in concentrated mixtures of polymers and surfactants10.1039/ft9959103901 ↗
45. Surface characteristics of phenolic resin coatings
46. Influence of dodecyl surfactants on the cross-linking, plasticization and damping behavior of epoxy novolac resins10.1039/D2SM01126C ↗
47. Investigating the hydrophilicity of phenol formaldehyde foams: effects of synthesis parameters10.1002/app.54877 ↗
48. Test of Hofmeister-like series of anionic headgroups: clouding and micellar growth10.1007/s00396-013-2942-9 ↗
49. Influence of the Hofmeister anions on self-organization of 1-decyl-3-methylimidazolium chloride in aqueous solutions10.1016/j.jcis.2011.06.058 ↗
50. Time-resolved surface rearrangements of polymer films monitored by dynamic recovery contact angle (DRCA)10.1039/C4RA01329H ↗
51. Surface segregation of low surface energy polymeric dangling chains in a cross-linked polymer network investigated by a combined experimental–simulation approach10.1021/ma302236w ↗
52. PDMS-Based self-replenishing coatings10.1016/j.polymer.2016.11.026 ↗
53. Surface rearrangement of tailored polyurethane-based coatings10.1007/BF02733886 ↗
54. Hydrophilic self-replenishing coatings with long-term water stability for anti-fouling applications10.3390/coatings8050184 ↗
55. Superior anti-biofouling properties of mPEG-modified polyurethane networks via incorporation of a hydrophobic dangling chain10.1016/j.porgcoat.2021.106358 ↗
56. A quantatitive kinetic theory of emulsion type. I. Physical chemistry of the emulsifying agent
57. Calculation of hydrophile–lipophile balance for polyethoxylated surfactants by group contribution method10.1016/j.jcis.2005.12.009 ↗
58. Ageing phenomena in hydrophilic phenolic resin coatings10.1016/j.polymdegradstab.2025.111736 ↗
59. Crystallization of potassium sulfate from pure aqueous solution and in presence of surfactants10.1002/crat.2170180402 ↗
60. Modification and growth rate and habit of adipic acid crystals with surfactants10.1021/j100827a014 ↗
61. Comparison investigation of the effects of ionic surfactants on the crystallization behavior of calcium oxalate: from cationic to anionic surfactant10.1016/j.colsurfa.2012.03.034 ↗
62. Crystal modification of calcium sulfate dihydrate in the presence of some surface-active agents10.1016/j.jcis.2003.09.023 ↗
63. Kinetic parameters of thermal degradation of polyethylene glycol-toughened novolac-type phenolic resin10.1002/1097-4628(20010411)80:2<188::AID-APP1086>3.0.CO;2-B ↗
64. Thermodynamic properties of novolac-type phenolic resin blended with poly(ethylene oxide)10.1002/(SICI)1099-0488(19980730)36:10<1647::AID-POLB6>3.0.CO;2-M ↗
65. Médus · 2023
66. Solvent effects on the preferred conformation of poly(ethylene glycols)10.1021/ma60011a015 ↗
67. Poly(oxyethylene)−Water interactions: a molecular dynamics study10.1021/ja951005c ↗
68. Some properties of poly(ethylene oxide)1 in aqueous solution10.1002/app.1959.070010110 ↗
69. Universal representations of evaporation modes in sessile droplets10.1371/journal.pone.0184997 ↗
70. Simple theory of ‘Stick-Slip’ wetting hysteresis10.1021/la00003a057 ↗
71. Contact angle measurement and contact angle interpretation10.1016/S0001-8686(98)00087-6 ↗
72. Surface and thermodynamics properties of commercial fatty-alcohol ethoxylate surfactants10.1016/j.molliq.2023.121396 ↗
73. The relationship of structure to properties in surfactants. IV. Effectiveness in surface or interfacial tension reduction10.1016/0021-9797(76)90257-5 ↗
74. Evaluation and optimization of the factors affecting nonionic surfactant-mediated phase separations10.1021/ac00079a005 ↗
75. Polyoxyethylene alkyl ether nonionic surfactants: physicochemical properties and use for cholesterol determination in food10.1016/S0039-9140(01)00395-2 ↗
76. Adsorption of nonionic Brij and Tween surfactants at PTFE-water and air-water interfaces: investigations on wetting, dispersion stability, foaming and drug solubilization10.1016/j.colsurfa.2016.08.057 ↗
77. The influence of the structure of selected Brij and Tween homologues on the thermodynamic stability of their binary mixed micelles10.1016/j.jct.2017.01.020 ↗
78. Aggregation of non ionic surfactant igepal in aqueous solution: fluorescence and light scattering studies10.3390/i4110562 ↗
79. Cosgrove · 2010
80. Adsorption of dodecyl sulfate surfactants with monovalent metal counterions at the air-water interface studied by Neutron reflection and surface tension10.1006/jcis.1993.1261 ↗
81. Effect of changing alkyl chain in imidazolium based ionic liquid on the micellization behavior of anionic surfactant sodium hexadecyl sulfate in aqueous media10.1080/01932691.2020.1724796 ↗
82. Effect of temperature on micelle formation in aqueous solutions of alkyltrimethylammonium bromides10.1016/0021-9797(89)90428-1 ↗
83. Critical micelle concentration of some surfactants and thermodynamic parameters of their micellization10.1016/j.fluid.2012.03.018 ↗
84. Study of micellar behavior of crown ether and tetraethylammonium bromide in aqueous media10.1155/2010/927642 ↗
85. Solubilization behavior of sodium dodecylpolyoxyethylene sulfates in relation to their polyoxyethylene chain lengths10.1021/j100850a024 ↗
86. Interactions of some hofmeister cations with sodium dodecyl sulfate in aqueous solution10.1002/jsde.12227 ↗
87. Surface tension and bubble coalescence phenomena of aqueous solutions of electrolytes10.1021/la00005a002 ↗
88. The Hofmeister series effect in adsorption of cationic surfactants—theoretical description and experimental results10.1016/j.cis.2006.06.017 ↗
89. Hofmeister salt effects on surface tension arise from partitioning of anions and cations between bulk water and the air−water interface10.1021/jp070245z ↗
90. Benrraou · J. Phys. Chem. B · 2003 · 107 · 1343210.1021/jp021714u ↗
91. The present state of affairs with Hofmeister effects10.1016/j.cocis.2004.05.004 ↗