journal article·2026-07

Mechanical and durability performance of talc ore additive calcium aluminate cement-based mortars reinforced with hybrid fibers

Alperen Kaman, Arın Yılmaz, Yurdakul Aygörmez

Publisher page

Abstract

Calcium Aluminate Cement (CAC) mixtures offer an alternative product. However, the binders used as substitutes for CAC are limited. In this study, ground talc ore was substituted for CAC at specific ratios (0%, 5%, 10%, 15%, and 20%). In the series where talc was used at 0%, 5%, and 10%, yielding the best results, microfiber was substituted at 0%, 0.3%, 0.6%, and 0.9%. Additionally, compressive and flexural strength tests were conducted at 7, 28, and 90 days. To determine durability performance, a high-temperature test (250, 500, and 750 °C), a freeze-thaw test (100 cycles), 10% magnesium sulfate (MgSO4) and 10% sodium sulfate (Na2SO4) solutions for 2 and 3 months were conducted. After the tests, compressive and flexural strengths and weight values were compared. XRD, TGA-DTA, and SEM analyzes were also conducted. The results indicated that talc ore substitution had a negative effect on the results due to its reduced cement content, while increasing SiO2 and MgO contents also had positive effects on the strength results, particularly after durability effects. Microfiber was found to increase ductility and resistance to first cracks. In general, the evaluation of talc ore substitution is beneficial from the point of view of evaluating sustainable and cost-effective building materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Development of cement industry in poland–history, current state, ecological aspects. A review10.1016/j.jclepro.2016.09.139 ↗
2. Fiber-reinforced lightweight calcium aluminate cement-based concrete: effect of exposure to elevated temperatures10.3390/su15064722 ↗
3. Newman · 2003
4. Development of coir-fibre cement composite roofing tiles10.1016/j.protcy.2016.05.024 ↗
5. Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement10.1002/suco.202200142 ↗
6. Compressive and direct tensile behavior of concrete containing Forta-Ferro fiber and calcium aluminate cement subjected to sulfuric acid attack with optimized design10.1016/j.conbuildmat.2020.118999 ↗
7. High temperature material properties of calcium aluminate cement concrete10.1016/j.conbuildmat.2015.07.023 ↗
8. The role of pre-heating and mineral additive modification on long-term strength development of calcium aluminate cement mortars10.1016/j.conbuildmat.2022.127720 ↗
9. Insulating and fire-resistance performance of calcium aluminate cement based lightweight mortars10.1016/j.conbuildmat.2022.129759 ↗
10. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
11. Compressive strength development of calcium aluminate cement–GGBFS blends10.1016/j.cemconcomp.2012.08.016 ↗
12. Effect of calcium aluminate cement on water resistance and high-temperature resistance of magnesium-potassium phosphate cement10.1016/j.conbuildmat.2018.04.200 ↗
13. Resource utilization of sulfidic copper tailings in calcium aluminate cement: mechanical property, hydration process and environmental impact
14. The effect of carbon fiber additive on early hydration of calcium aluminate cement10.1007/s10973-016-5312-2 ↗
15. High temperature durability of fiber reinforced high alumina cement composites10.1016/j.conbuildmat.2018.01.076 ↗
16. Mechanical properties of calcium aluminate cement reinforced with plasma-treated basalt fibers for in situ combustion10.1021/acsomega.2c00617 ↗
17. Investigation of the effect of different curing conditions on the mechanical performance of calcium aluminate cement concrete at elevated temperatures10.1016/j.conbuildmat.2023.133920 ↗
18. Investigating the role of steel and polypropylene fibers for enhancing mechanical properties and microstructural performance in mitigating conversion effects in calcium aluminate cement10.1016/j.conbuildmat.2024.136515 ↗
19. Mechanical properties and micro-structures of calcium aluminate based ultra high strength cement10.1016/j.cemconres.2010.01.001 ↗
20. The effect of temperature on the formation of the hydrated calcium aluminate cement structure10.1016/j.proeng.2013.04.015 ↗
21. Structural, electronic, and mechanical properties of calcium aluminate cements: insight from first-principles theory10.1016/j.conbuildmat.2020.120259 ↗
22. Review on recent advances in securing the long-term durability of calcium aluminate cement (CAC)-based systems10.1088/2631-6331/ac1913 ↗
23. Talc as raw material for cementitious products formulation10.1016/j.jascer.2014.05.007 ↗
24. Thermo-alkali activation of talc for the production of a novel white one-part alkali-activated magnesia-based cement10.1016/j.conbuildmat.2021.124909 ↗
25. Investigating the promising effect of thermally-treated talc powder on the performance of alkali-activated slag cement10.1007/s41062-024-01588-1 ↗
26. Talc-based cementitious products: effect of talc calcination10.1016/j.jascer.2015.07.003 ↗
27. Evaluation of the 12–24 mm basalt fibers and boron waste on reinforced metakaolin-based geopolymer10.1016/j.conbuildmat.2020.118976 ↗
28. High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers10.1016/j.conbuildmat.2018.08.062 ↗
29. Elevated temperature, freezing-thawing and wetting-drying effects on polypropylene fiber reinforced metakaolin based geopolymer composites10.1016/j.conbuildmat.2019.117502 ↗
30. A short-term durability comprehensive study of ceramic waste-doped white cement composites with hooked-end, basalt and copper-coated fibers
31. Investigation of mechanical and durability properties of brick powder-added White Cement composites with three different fibers10.1016/j.conbuildmat.2022.128548 ↗
32. A laboratory investigation of steel to fly ash-based geopolymer paste bonding behavior after exposure to elevated temperatures10.1016/j.conbuildmat.2020.119267 ↗
33. A comprehensive evaluation of fracture toughness, fracture energy, flexural strength and microstructure of calcium aluminate cement concrete exposed to high temperatures10.1016/j.engfracmech.2021.108221 ↗
34. High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers10.1016/j.conbuildmat.2006.11.003 ↗
35. Properties of reinforced concrete steel rebars exposed to high temperatures
36. A comparative study on geopolymers synthesized by different classes of fly ash after exposure to elevated temperatures10.1016/j.jclepro.2020.122500 ↗
37. Thermal properties and residual strength after high temperature exposure of cement mortar using ferronickel slag aggregate10.1016/j.conbuildmat.2018.12.068 ↗
38. Microstructural and non-destructive investigation of the effect of high temperature exposure on ground ferronickel slag blended fly ash geopolymer mortars
39. A study the effect of using ceramic waste powder as partial replacement for cement on concrete properties
40. Ceramic waste powder as alternative mortar-based cementitious material
41. Sulfate and chloride resistance of bottom ASH doped slag-based geopolymer composites
42. Research on resistance to sulfate and chloride of reinforced metakaolin-based geopolymers10.30880/ijscet.2022.13.01.009 ↗
43. Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber10.1016/j.conbuildmat.2006.08.006 ↗
44. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres10.1016/S0008-8846(03)00222-9 ↗
45. Development, properties and production of geopolymers based on secondary raw materials
46. The freeze-thaw strength evolution of fiber-reinforced cement mortar based on NMR and fractal theory: considering porosity and pore distribution10.3390/ma15207316 ↗
47. Performance of SIMCON in structural retrofitting under freeze–thaw exposure