journal article·2026-06Open access

Innovative coatings for corrosion protection of historical aluminium alloys in aerospace heritage

Marco Valente Chavez Lozano, Elena Bernardi, Carla Martini, Andrea Balbo, Elena Buratti, Federica Zanotto, Cristina Chiavari

Abstract

The conservation of historical aluminium aircraft exposed to outdoor conditions requires protective systems combining corrosion mitigation, aesthetic compatibility and chemical stability. Within the PROCRAFT project two advanced coatings, namely, a bio-based cutin-derived polyurethane and a 3-mercaptopropyl trimethoxysilane (PropS-SH)-based system, were comparatively evaluated against the benchmark Paraloid B72 (PB72) on historic corroded and painted Duralumin substrates dating from World War II and the immediate post-war period. Coupons were subjected to an accelerated ageing protocol including simulated acid rain runoff, followed by thermo-hygrometric and UV cycling. Protective performance was assessed through a multi-analytical approach integrating electrochemical tests, colour analysis, SEM-EDS, ATR-FTIR, μ-Raman, and metal release quantification by MP-AES. On corroded substrates, both innovative coatings exhibited higher polarization resistance than PB72 and values two orders of magnitude greater than those of uncoated surfaces after ageing. PropS-SH provided inhibition efficiencies ≥95% in terms of Al release, while the cutin-based coating achieved inhibition efficiencies >85%, outperforming PB72 under the same conditions. On painted substrates (already intrinsically protective) PropS-SH produced up to a one-order-of-magnitude increase in polarization resistance compared to the original paint system, whereas PB72 provided only marginal improvements. Spectroscopic analysis after ageing revealed progressive siloxane network densification in PropS-SH and, in the cutin-based coating, continued crosslinking accompanied by UV-mitigating behaviour attributable to residual natural antioxidants. Overall, both coatings provided effective corrosion protection on painted and corroded substrates, with PropS-SH exhibiting superior performance in suppressing metal release and enhancing polarization resistance, while maintaining good aesthetic stability throughout the artificial ageing process. • New strategies for preventing corrosion of historic Al-alloys wrecks. • Outdoor exposure simulated through accelerated ageing. • Assessment of cutin-based polyurethane and 3-mercaptopropyl trimethoxysilane coatings. • Evaluation of colour, physical and chemical changes after ageing. • Best metal release suppression and highest polarization resistance for PropS-SH.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Material Properties and Applications · Material Selection and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Study of post-world War II French aeronautical aluminium alloy and coatings: historical and materials science approach10.1080/00393630.2019.1610846 ↗
2. Corrosion of aluminum and aluminum alloys
3. Historical aircraft paints: analytical pyrolysis for the identification of paint binders used on two Messerschmitt Bf 109 planes10.1016/j.jaap.2022.105468 ↗
4. Historical primers and paints used for aeronautical protection and colouring during WWII: a multi-techniques approach on archaeological parts10.1016/j.culher.2023.05.005 ↗
5. Coatings for corrosion protection: inorganic
6. PROCRAFT: Protection and Conservation of Heritage Aircraft, Heritage Research Hub. https://www.heritageresearch-hub.eu/project/procraft/ (accessed September 26, 2023).
7. M. Brunet, L. Robbiola, P. Sciau, M. Drieux-Daguerre, Preserving aviation Heritage: the need for an approach based on materials analysis, in: Metal 2019 Proceedings of the Interim Meeting of the ICOM-CC Metals Working Group September 2-6, 2019 Neuchâtel, Switzerland, ISBN 9789290124573, pp.425-431.
8. Preliminary study of the anti-corrosion performance of different protection systems applied to two World War II aluminium alloy archaeological objects with different surface finishes10.1016/j.culher.2024.12.016 ↗
9. Protective treatments for the protection and preservation of aircraft artefacts from world war II
10. The novel paste electrolyte measuring cell for EIS testing of the commonly used surface protection on bronze
11. The evaluation and analysis of the anti-corrosion performance of the sealing material B72 for metal artifacts based on electrochemical noise10.3390/coatings14091190 ↗
12. Water-based & eco-friendly epoxy-silane hybrid coating for enhanced corrosion protection & adhesion on galvanized steel10.1016/j.porgcoat.2016.07.010 ↗
13. Hybrid silane coating reinforced with silanized graphene oxide nanosheets with improved corrosion protective performance10.1039/C6RA04843A ↗
14. Effectiveness of corrosion inhibitor films for the conservation of bronzes and gilded bronzes10.1016/j.corsci.2012.03.003 ↗
15. Organosilane coatings applied on bronze: influence of UV radiation and thermal cycles on the protectiveness10.1016/j.porgcoat.2015.01.017 ↗
16. Protective silane treatment for patinated bronze exposed to simulated natural environments10.1016/j.matchemphys.2013.05.050 ↗
17. The formation of a protective layer of 3-mercapto-propyl-trimethoxy-silane on copper10.1016/j.corsci.2006.08.019 ↗
18. Spectroscopical and electrochemical characterisation of a (3-Mercaptopropyl)trimethoxysilane - based protective coating on aluminium alloy 202410.5562/cca3161 ↗
19. Comparison of two-typed (3-mercaptopropyl)trimethoxysilane-based networks on Au substrates10.1016/j.talanta.2004.06.030 ↗
20. Influence of hydrolysis time on the structure and corrosion protective performance of (3-mercaptopropyl)triethoxysilane film on copper10.1016/j.corsci.2011.05.010 ↗
21. Silane coatings of metallic biomaterials for biomedical implants: a preliminary review10.1002/jbm.b.34151 ↗
22. Infrared and Raman spectroscopic features of plant cuticles: a review10.3389/fpls.2014.00305 ↗
23. Cicognini · 2015
24. Physical–Chemical Characteristics of Cutin separated from Tomato Waste for the Preparation of Bio-lacquers10.32732/ase.2019.11.1.33 ↗
25. Valorization of agro-industrial wastes by ultrasound-assisted extraction as a source of proteins, antioxidants and cutin: a Cascade approach10.3390/antiox11091739 ↗
26. Polyhydroxyester films obtained by non-catalyzed melt-polycondensation of natural occurring fatty polyhydroxyacids10.3389/fmats.2015.00059 ↗
27. Bio-Based coatings for food metal packaging inspired in biopolyester plant cutin10.3390/polym12040942 ↗
28. Development of biobased poly(ester-urethane) coatings with excellent hydrophobicity from Tomato byproducts10.1021/acssuschemeng.3c06052 ↗
29. Cutin-based coatings for corrosion protection of Al alloys
30. Corrosion of aircraft heritage: a comparison between modern and historic Duralumin alloys10.1186/s40494-024-01134-3 ↗
31. I. Cigognini, A. Montanari, R.D.L.T. Carreras, G.C.B. Montserrat, Extraction method of a polyester polymer or cutin from the wasted tomato peels and polyester polimer so extracted, WO 2015/028299 A1 (2015) 1-17. https://patents.google.com/patent/WO2015028299A1/en (Accessed 16 October 2024).
32. Atmospheric corrosion of fire-gilded bronze: corrosion and corrosion protection during accelerated ageing tests10.1016/j.corsci.2015.08.013 ↗
33. Bulk deposition close to a Municipal Solid Waste incinerator: one source among many10.1016/j.scitotenv.2013.03.097 ↗
34. An innovative multi-component fluoropolymer-based coating on outdoor patinated bronze for Cultural Heritage: durability and reversibility10.1016/j.culher.2020.04.015 ↗
35. Evaluation of the effectiveness of coatings for the protection of outdoor terracotta artworks through artificial ageing tests10.1016/j.culher.2024.09.008 ↗
36. Evaluation of polymers for conservation treatments of outdoor exposed stone monuments. Part I: Photo-oxidative weathering10.1016/j.polymdegradstab.2006.08.012 ↗
37. Characterization of ultrathin polymer films using p-Polarized ATR-FTIR and its comparison with XPS10.1021/acs.langmuir.9b00316 ↗
38. Protective coatings for ceramic artefacts exposed to UV ageing10.1038/s41529-023-00343-8 ↗
39. Comparing amorphous silica, short-range-ordered silicates and silicic acid species by FTIR10.1038/s41598-022-15882-4 ↗
40. Fourier transform infrared and raman characterization of Silica-Based materials
41. Hydrolysis kinetics and stability of bis(triethoxysilyl)ethane in water-ethanol solution by FTIR spectroscopy10.1163/156856197X01001 ↗
42. Harnessing catalysis selectivity and isophorone diisocyanate asymmetry for tailored polyurethane prepolymers and networks10.1021/acs.macromol.1c02491 ↗
43. Durability of self-cleaning TiO2 coatings on fired clay brick façades: effects of UV exposure and wet & dry cycles10.1016/j.buildenv.2013.10.005 ↗
44. Atmospheric corrosion of brass in outdoor applications: Patina evolution, metal release and aesthetic appearance at urban exposure conditions10.1016/j.scitotenv.2011.09.083 ↗
45. UV-curable thiol-ene system for broadband infrared transparent objects10.1038/s41467-023-44273-0 ↗
46. Stability of carotenoids toward UV-irradiation in hexane solution10.2298/JSC0801015C ↗
47. Nondestructive and rapid assessment of intact tomato freshness and lycopene content based on a miniaturized raman spectroscopic System and colorimetry10.1007/s12161-016-0440-7 ↗
48. Preparation, characterization and stability investigation of lycopene-chitooligosaccharides complexes10.1016/j.fbio.2020.100854 ↗
49. Photodegradation risk evaluation of polyurethane gluelines in wood products by infrared spectroscopy and mechanical tests10.1016/j.conbuildmat.2023.131251 ↗
50. The oxidative drying of alkyd paint catalysed by metal complexes10.1016/j.ccr.2005.02.002 ↗
51. Factors affecting the reactivity of zinc oxide with different drying oils: a vibrational spectroscopy study
52. Shedding light on degradation gradients in celluloid: an ATR-FTIR study of artificially and naturally aged specimens10.3390/polym15030522 ↗
53. Polymers and their composites for corrosion inhibition application: development, advancement, and future scope–A critical review10.1016/j.corcom.2023.10.006 ↗
54. New nanostructured electrochemical biosensors based on three-dimensional (3-mercaptopropyl)-trimethoxysilane network10.1039/C0AN00475H ↗
55. Corrosion-resistant polyurethane coatings from structure-homogenized biorefinery lignin through fractionation and oxypropylation
56. Influence of surface finish and composition on the deterioration of building stones exposed to acid atmospheres10.1016/j.conbuildmat.2015.12.125 ↗
57. Effects of wax-based anti-graffiti on copper patina composition and dissolution during four years of outdoor urban exposure10.1016/j.culher.2010.02.001 ↗