The effect of manganese and cerium modification on acetaldehyde selectivity of Ti-pillared bentonites
Source abstract
Abstract
In this study, titanium-pillared bentonite (Ti-PB) was synthesized from raw bentonite obtained from the Hançılı region (Middle Anatolia). Ti-PB was further modified with Mn–Cu, Ce–Mn–Cu, Ce–Cu, and Ce–Fe by combining cation exchange and incipient wetness impregnation, followed by thermal treatment. N2 physisorption, XRD, FTIR, TGA/DTA, XPS, SEM, and TEM, were used to evaluate the physicochemical and catalytic properties. All synthesized Ti-PB samples exhibited the anatase TiO2 phase. Pillaring led to a remarkable improvement in the textural properties. The Ti-PB sample calcined at 500 °C showed d 001 value of 4.40 nm, the specific BET surface area of 346 m2 g−1, and a micropore volume of 0.092 cm3g-1. Subsequent impregnation with Ce, Fe, Cu, and Mn caused only slight changes in surface area. TiO2 pillaring and subsequent metal doping produced a nearly uniform morphology. Compared with the Ti-PB support, catalysts impregnated with Mn, Cu, Fe, or Ce exhibited enhanced thermal stability at high temperatures. Cu impregnation promoted Lewis acidity, whereas Ce–Fe and Ce–Cu increased Brønsted acidity. Side reactions, such as ethylene dehydration and deep oxidation to CO2 were inhibited by Mn-based catalysts, which were the most effective in suppressing these pathways at elevated temperatures. This study identifies Cuw@Ti-PB, (Cu–Mn)w@Ti-PB and (Ce–Cu–Mn)w@Ti-PB as highly effective, stable, and selective heterogeneous catalysts for the selective oxidation of ethanol to acetaldehyde. The (Cu–Mn)w@Ti-PB catalyst showed the best catalytic performance, achieving a maximum ethanol conversion of 80% and an acetaldehyde selectivity of 88% at 300 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mesoporous Materials and Catalysis · Clay minerals and soil interactions · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Vanadium-containing modified clays as catalysts for acetaldehyde production by ethanol selective oxidation10.1016/j.cattod.2024.114911 ↗
2. (V)/Hydrotalcite, (V)/Al2O3, (V)/TiO2 and (V)/SBA-15 catalysts for the partial oxidation of ethanol to acetaldehyde10.1016/j.molcata.2016.04.024 ↗
3. Redox mechanism for selective oxidation of ethanol over monolayer V2O5/TiO2 catalysts10.1016/j.jcat.2016.02.022 ↗
4. Activation of ethanol transformation on copper-containing SBA-15 and MnSBA-15 catalysts by the presence of oxygen in the reaction mixture10.3390/ijms24032252 ↗
5. Highly loaded copper on mesoporous silica as catalysts for acetaldehyde production from ethanol: their synthesis, characteristics, and catalytic properties10.1002/jctb.7813 ↗
6. Bioethanol selective oxidation to acetaldehyde over Ag–CeO2: role of metal–support interactions10.1039/C6NJ03853K ↗
7. Promoting effect of copper doping on LaMO3 (M = Mn, Fe, Co, Ni) perovskite-supported gold catalysts for selective gas-phase ethanol oxidation10.3390/catal15020176 ↗
8. Highly efficient and robust Cu catalyst for non-oxidative dehydrogenation of ethanol to acetaldehyde and hydrogen10.1016/j.jcat.2020.05.018 ↗
9. Selective oxidation of ethanol over vanadia-based catalysts: the influence of support material and reaction mechanism10.1016/j.cattod.2016.04.042 ↗
10. The effect of potassium modification on structural properties and catalytic activity of copper and iron containing SBA-16 catalysts for selective oxidation of ethanol10.1016/j.matchemphys.2019.01.054 ↗
11. Uniformly dispersed Cu nanoparticles over mesoporous silica as a highly selective and recyclable ethanol dehydrogenation catalyst10.3390/catal12091049 ↗
12. Performance of nickel-manganese and nickel-cobalt-manganese mixed oxide catalysts in ethanol total oxidation10.1016/j.cattod.2023.114438 ↗
13. Strategic design of ethanol oxidation catalysts: from active metal selection to mechanistic insights and performance engineering10.3390/nano15191477 ↗
14. Promoting effect of unreducible metal doping on OMS-2 catalysts for gas-phase selective oxidation of ethanol10.1016/j.jcat.2018.09.007 ↗
15. Selective oxidation of ethanol to acetaldehyde over Au–Cu catalysts prepared by a redox method10.1016/j.cattod.2013.11.065 ↗
16. VOx/Zr–SBA-15 catalysts for selective oxidation of ethanol to acetaldehyde10.1007/s11696-017-0336-z ↗
17. CeOx/TiO2 (rutile) nanocomposites for the low-temperature dehydrogenation of ethanol to acetaldehyde: a diffuse reflectance infrared fourier transform spectroscopy−mass spectrometry study10.1021/acsanm.9b00366 ↗
18. Titanium-pillared clay: preparation optimization, characterization, and artificial neural network modeling10.3390/ma15134502 ↗
19. Synthesis and application of pillared clay heterogeneous catalysts for wastewater treatment: a review10.1039/C7RA12924F ↗
20. M.A.Vicente, R. Trujillano, K.J. Ciuffi, E.J. Nassar, S.A.Korili, A. Gil, Pillared clays and related catalysts, Pillared Clay Catalysts in Green Oxidation Reactions, Springer, 301-318.10.1007/978-1-4419-6670-4_11 ↗
21. Preparation, characterization and catalytic activity of titania pillared montmorillonite clays10.1016/j.micromeso.2006.02.005 ↗
22. Pillared clays and clay minerals
23. Effects of cerium, iron and copper incorporation on the structural properties and activities of Ti-Pillared bentonites10.17776/csj.343221 ↗
24. Catalytic properties and activity of copper and silver containing Al-pillared layered bentonite for CO oxidation10.1016/j.molstruc.2015.10.072 ↗
25. Determination of adsorptive and catalytic properties of copper, silver and iron containing titanium-pillared bentonite for the removal bisphenol A from aqueous solution10.1016/j.apsusc.2015.10.228 ↗
26. Ti-pillared clays: synthesis and general characterization10.1346/CCMN.2006.0540608 ↗
27. Ciprofloxacin removal using pillared clays10.3390/w15112056 ↗
28. New design for titanium-pillared montmorillonite composites as efficient heterogeneous catalysts to enhance Fe(II) reductivity for 2-nitrophenol removal10.1016/j.clay.2021.106052 ↗
29. Ti-pillared montmorillonite clay for adsorptive removal of amoxicillin, imipramine, diclofenac-sodium, and paracetamol from water10.1016/j.jhazmat.2020.122832 ↗
30. TiO2-pillared magadiite and its arsenic adsorption capacity10.1007/s10934-018-0713-1 ↗
31. Titanium-based nanocomposite materials for arsenic removal from water: a review
32. Photocatalytic and adsorption properties of TiO2-pillared montmorillonite by hydrothermally activated intercalation of titanium polyhydroxo complexes10.3762/bjnano.9.36 ↗
33. Photocatalytic degradation of anionic and cationic dyes over TiO2 P25, and Ti-pillared clays and Ag-doped Ti-pillared clays10.1016/j.clay.2014.04.014 ↗
34. Fe/Ti co-pillared clay for enhanced arsenite removal and photo oxidation under UV irradiation10.1016/j.apsusc.2014.10.111 ↗
35. Catalytic activity of Ti- and Al-pillared montmorillonite and beidellite for cumene cracking and hydrocracking10.1016/0926-860X(96)00061-0 ↗
36. Vanadium supported on titanium pillared montmorillonite clay for the selective catalytic oxidation of benzyl alcohol10.1007/s11244-022-01663-w ↗
37. Ruthenium-doped titania-pillared clay for the selective catalytic oxidation of cyclohexene: influence of Ru loading10.9767/bcrec.14.3.4723.614-624 ↗
38. The catalytic performance of Ti-PILC supported CrOx–CeO2 catalysts for n-butylamine oxidation10.1007/s10934-015-9947-3 ↗
39. Fly ash-, foundry sand-, clay-, and pumice-based metal oxide nanocomposites as green photocatalysts10.1039/D1RA05647F ↗
40. Ethanol partial oxidation over VOx/TiO2 catalysts: the role of titania surface oxygen on vanadia reoxidation in the Mars−van krevelen mechanism10.1021/acscatal.7b03327 ↗
41. Inclusion of Ti and Zr species on clay surfaces and their effect on the interaction with organic molecules10.1016/j.apsusc.2018.03.157 ↗
42. Enhancing the interaction between Mn and Ce oxides supported on fly ash with organic acid ligands interface modification for effective VOC removal: a combined experimental and DFT + U study10.1016/j.fuel.2021.123043 ↗
43. Micro-mesopore analysis of Cu2+ and Ag+ containing Al-pillared bentonite10.1016/j.clay.2010.07.004 ↗
44. A., Vanadia-doped titanium-pillared clay: preparation, characterization and reactivity in the epoxidation of allylic alcohol (E)-2-hexen-1-ol10.1016/j.catcom.2005.09.003 ↗
45. Pillared clays as superior catalysts for selective catalytic reduction of NO with NH310.1021/ie00006a003 ↗
46. Comparison study of titania pillared interlayered clays and porous clay heterostructures modified with copper and iron as catalysts of the DeNOx process10.1016/j.clay.2010.12.009 ↗
47. Lowell · 2004 · 213
48. Rauquerol · 1999 · 165
49. Highly hydrophobic TiO2 pillared clay for photocatalytic degradation of organic compounds in water10.1016/j.micromeso.2003.10.011 ↗
50. Effect of ultrasound on the structural and textural properties of copper-impregnated cerium-modified zirconium-pillared bentonite10.1016/j.apsusc.2011.10.056 ↗
51. Phase tunable nickel doped Mn3O4 nanoparticle synthesis by chemical precipitation: kinetic study on dye degradation10.1039/D3NA00754E ↗
52. Removal of uranium(VI) from aqueous solutions and nuclear industry effluents using humic acdi-immobilized zirconium-pillared clay10.1016/j.jenvrad.2009.12.001 ↗
53. Characterization of Al-, Cr-pillared clays and CO oxidation10.1016/j.clay.2008.07.006 ↗
54. Regeneration of iron-montmorillonite adsorbent as an efficient heterogeneous fenton catalytic for degradation of bisphenol A: structure, performance and mechanism10.1016/j.cej.2017.07.093 ↗
55. Cerium oxide nanostructures on titania: effect of the structure and stoichiometry on the reactivity toward ethanol oxidation10.1021/acs.jpcc.8b05807 ↗
56. Nanostructured TiO2 co-modified with silver and bismuth for formaldehyde degradation under visible light10.1016/j.apcata.2023.119310 ↗
57. Improved activity and stability for chlorobenzene oxidation over ternary Cu-Mn–O-Ce solid solution supported on cordierite10.1007/s11356-022-24988-1 ↗
58. Synergistic effect of photo-thermal oxidation for a low concentration of HCHO over Bi3+-TiO2/MnFeOx catalysts at ambient temperature10.1007/s11356-022-22835-x ↗
59. Ce 3d XPS investigation of cerium oxides and mixed cerium oxide (CexTiyOz)10.1002/sia.2686 ↗
60. The surface science of titanium dioxide10.1016/S0167-5729(02)00100-0 ↗
61. Structural, textural and acidic properties of Cu-, Fe- and Cr-doped Ti-pillared montmorillonites10.1016/j.clay.2015.09.010 ↗
62. Hydrogen Production from Methanol Steam Reforming over TiO2 and CeO2 Pillared Clay Supported Au Catalysts10.3390/app8020176 ↗
63. Catalytic behavior of nickel loaded on acid-activated and pillared clay in total gas-phase oxidation of ethanol10.1007/s11051-018-4385-1 ↗
64. Ethanol adsorption and oxidation on bimetallic catalysts containing platinum and base metal oxide supported on MCM-4110.1016/j.apcatb.2011.11.050 ↗
65. Elucidating structure-performance correlations in gas-phase selective ethanol oxidation and CO oxidation over metal-doped γ-MnO210.1016/S1872-2067(20)63551-3 ↗