Long-term mechanical and microstructural evolution of thermal spray coatings for sink roll applications
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Bright · 2004 · 1
2. Corrosion of powder-metallurgically produced MoW alloys liquid zinc
3. DeKany · 1960
4. Dissolution behavior of nickel-based superalloy in molten zinc: its mechanism and kinetics10.1016/j.jallcom.2021.160338 ↗
5. One-step and selective extraction of nickel from nickel-based superalloy by molten zinc10.1016/S1003-6326(21)65620-0 ↗
6. Reaction kinetics of the formation of intermetallic Fe – zn during hot - dip galvanizing of steel
7. Formation behavior of Fe–Zn intermetallic layers at the interface between Fe–Mn and pure Zn melt at 460°C10.2355/isijinternational.ISIJINT-2024-096 ↗
8. Intermetallic phases formation in hot dip galvanizing process10.4028/www.scientific.net/SSP.197.77 ↗
9. The effects of an Fe–Zn intermetallic-containing coating on the stress corrosion cracking behavior of a hot-dip galvanized steel10.1016/S0257-8972(01)01017-9 ↗
10. Minimizing zinc coating section downtime of continuous galvanizing line in steel industry
11. Metallic materials resistant to molten zinc10.1007/BF03377576 ↗
12. Effect of molybdenum on the microstructures of as-cast Fe-B alloys and their corrosion resistance in molten zinc10.5006/2280 ↗
13. Stadelmaier · Acta Metall. · 1959 · 7 · 41510.1016/0001-6160(59)90052-5 ↗
14. Effect of cold rolling on stress corrosion cracking of type 316L and type 316 stainless steels in high temperature water10.3323/jcorr.55.399 ↗
15. Analysis on dominant influencing factors of on-line life cycle in sink roll system and effective improved methods10.1016/j.engfailanal.2015.08.004 ↗
16. Enhancing CFD computational efficiency using hybrid data-driven and physics-based modeling10.1016/j.csite.2026.107641 ↗
17. Comparison of hybrid deep learning models for estimation of the time-dependent scour depth downstream of river training structures10.1063/5.0231597 ↗
18. The metallurgy of zinc-coated steel10.1016/S0079-6425(98)00006-1 ↗
19. Simulation of flow in a continuous galvanizing Bath: part I. Thermal effects of ingot addition10.1007/s11663-004-0106-5 ↗
20. Structural and mechanical characterizations of top dross in a molten zinc bath10.2355/isijinternational.ISIJINT-2020-487 ↗
21. Liquid metal corrosion of 316L, Fe3Al, and FeCrSi in molten Zn-Al baths10.1007/s11661-005-0325-7 ↗
22. Size effect on flow field and dynamic deposition of bottom dross in a molten zinc pot10.2355/isijinternational.ISIJINT-2020-686 ↗
23. One-step Zn-based composites fabrication via double glow plasma for synergistic mechanical-corrosion control and interface mechanism elucidation10.1016/j.jmrt.2025.09.224 ↗
24. Development of zinc oxide-rich inner layers in hot-dip zinc coating for barrier protection10.1016/j.surfcoat.2006.04.012 ↗
25. Effect of nano‐silica on the corrosion behavior of silicate conversion coatings on hot‐dip galvanized steel10.1002/maco.201407633 ↗
26. Corrosion resistance, thermal diffusivity and mechanical properties of Ni–SiO 2 nanocomposite coatings on a 316 stainless steel for heat exchanger applications10.1515/mt-2022-0024 ↗
27. Effects of sonication on anticorrosive and mechanical properties of electrodeposited Ni–Zn–TiO2 nanocomposite coatings10.1016/j.surfcoat.2014.06.043 ↗
28. The effect of Ni-Al2O3 nanocomposite coatings on the wear and corrosion resistance and thermal diffusivity of 316 stainless steel plates of heat exchangers10.1007/s11665-022-07242-0 ↗
29. Materials resistance to liquid zinc corrosion on surface of sink roll10.1016/S1006-706X(08)60066-7 ↗
30. Possibilities of utilization thermally sprayed coatings in the field of sink rollers renovation10.21496/ams.2015.026 ↗
31. Microstructural evolution of a nickel-based single-crystal superalloy embrittled by molten Zn10.1016/j.matchar.2023.112738 ↗
32. Friction and wear characterization of some cobalt- and iron-based superalloys in zinc alloy baths10.1016/S0043-1648(01)00889-4 ↗
33. Sliding wear of various materials in molten zinc10.1179/026708302225007682 ↗
34. Microstructural characteristics and corrosion resistance in molten Zn-Al bath of Co-Mo-Cr-Si alloys10.1016/j.msea.2005.07.054 ↗
35. Reactive wetting of an iron-base superalloy MSA2020 and 316L stainless steel by molten zinc-aluminum alloy10.1007/s11661-008-9501-x ↗
36. Reactions of FeCr alloys with liquid zinc in hot-dip galvanizing10.1016/j.surfcoat.2015.05.041 ↗
37. A review on relationship between morphology of boride of Fe-B alloys and the wear/corrosion resistant properties and mechanisms10.1016/j.jmrt.2019.09.004 ↗
38. Effects of erosion angle on erosion properties of Fe-B alloy in flowing liquid zinc10.1007/s11661-015-2820-9 ↗
39. Intermetallic compounds formation during 316L stainless steel reaction with al-zn-si coating alloy10.3390/cryst12050735 ↗
40. Dissolution and diffusion characteristics of 316L stainless steel in molten zinc containing variable concentrations of aluminum, dep
41. Synthesis of La1-xGdxFe1-yCoyO3/r-GO nanocomposite with integrated features for the treatment of hazardous industrial effluents10.1016/j.ceramint.2021.12.098 ↗
42. Cobalt and holmium co-doped nickel ferrite nanoparticles: synthesis, characterization and photocatalytic application studies10.1515/zpch-2023-0273 ↗
43. Smart photocatalyst engineering: from surfactant-controlled nucleation to CNT-mediated charge transfer in inorganic spinel ferrite10.1016/j.inoche.2025.115768 ↗
44. Effects of tungsten addition on the microstructure and corrosion resistance of Fe-3.5B alloy in liquid zinc
45. Stress and deformation of ceramic rolls to produce high quality zinc coated steel sheet10.1088/1742-6596/842/1/012050 ↗
46. Influence of the cemented carbides composition on the disintegration in liquid zinc
47. Growth, structural and mechanical characterization and reliability of chemical vapor deposited Co and Co3O4 thin films as candidate materials for sensing applications10.4028/www.scientific.net/KEM.495.108 ↗
48. Measurement of residual stress in silicon carbide fibers of tubular composites using raman spectroscopy10.1016/j.actamat.2021.117164 ↗
49. Reciprocating sliding wear behavior of the heat-treated WC-12Co coatings10.1177/13506501221113176 ↗
50. S. Sakamoto, M. Yoshinaka, W. Co, I. Introduction, Fabrication, mechanical properties, and electrical conductivity of co,o, Ceramics, (n.d.) 1–2.
51. Tribological behaviour of HVOF sprayed WC-12Co, WC-10Co-4Cr and Cr3C2−25NiCr coatings10.1016/j.triboint.2016.09.025 ↗
52. Development of WC-Co coatings by plasma spray or HVOF technique for applications in galvanizing bath (Sink Roll)
53. Vural
54. Structural and optical properties of α aluminum oxide prepared by sol-gel method10.1016/j.cap.2024.12.008 ↗
55. Optical stress-sensing alumina nanocomposite coatings for aerospace structures
56. Alpha alumina formation in alum‐derived Gamma alumina10.1111/j.1151-2916.1982.tb10511.x ↗
57. Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification10.1016/j.bsecv.2016.10.001 ↗
58. Residual stress measurement in cracked components: capabilities and limitations of the cut compliance method10.4028/www.scientific.net/MSF.347-349.150 ↗
59. The effect of bond coat on mechanical properties of plasma-sprayed Al2O3 and Al2O3-13 wt% TiO2 coatings on AISI 316L stainless steel10.1016/j.vacuum.2004.11.004 ↗
60. Fabrication of anatase TiO2/amorphous carbon nanoparticles as anode materials for enhanced lithium ion storage10.1016/j.jpcs.2020.109524 ↗
61. Synthesis, characterization of α-Al2O3 nanoparticles and its application in decolorization of methyl Orange Azo Dye in the presence of UV light10.30799/jnst.192.19050101 ↗
62. Asymmetric lattice vibrational characteristics of rutile TiO 2 as revealed by laser power dependent raman spectroscopy10.1021/jp406948e ↗
63. Friction and abrasive wear behaviour of Al2O3-13TiO2 and Al2O3-13TiO2+Ni graphite coatings10.1016/j.triboint.2018.01.067 ↗
64. Effect of dissolution/precipitation on the residual stress redistribution of plasma-sprayed hydroxyapatite coating on titanium substrate in simulated body fluid (SBF)10.1016/j.jmbbm.2014.04.007 ↗
65. Investigation of selected HVOF and plasma sprayed coatings for sustained performance in molten zinc10.1016/j.corsci.2020.109177 ↗
66. Study of the mechanical properties of the hot dip galvanized steel and galvalume®10.1590/S1678-58782009000400006 ↗
67. Thermal-sprayed coatings on bushing and sleeve-pipe surfaces in continuous galvanizing sinking roller production line applications10.3390/coatings7080113 ↗
68. The corrosion behavior of plasma sprayed Fe2Al5 coating in molten Zn10.1016/j.surfcoat.2006.05.008 ↗
69. Reactions of Co based and Fe based superalloys with a molten Zn-Al alloy10.1179/026708304225017300 ↗
70. Liquid metal corrosion of 316L, Fe3Al, and FeCrSi in molten Zn-Al baths10.1007/s11661-005-0325-7 ↗
71. Effects of chromium addition on corrosion resistance of Fe-3.5B alloy in liquid zinc10.1016/j.surfcoat.2011.04.101 ↗
72. Interfacial morphology and corrosion resistance of Fe-B cast steel containing chromium and nickel in liquid zinc10.1016/j.corsci.2011.05.020 ↗
73. Corrosion resistance to Molten zinc of a novel FeB-10 Mo-12 Al0.25FeNiCoCr cermet and coating10.1007/s11666-021-01283-y ↗
74. Friction and wear properties of C/C and ceramics particle dispersed C/C composites in a zinc plating Bath10.2355/tetsutohagane1955.82.8_689 ↗