Green plasma engineering of cellulose surfaces for superhydrophobicity and tunable adhesion
Source abstract
Abstract
This study investigates the modification of cellulose wettability through sequential plasma etching and film deposition to achieve superhydrophobic surfaces with tunable adhesion. The plasma treatment is a clean, solvent-free method that eliminates the need for hazardous chemicals, aligning with sustainable material development. Kraft cellulose samples were etched with oxygen plasma to generate nanoscale surface features and subsequently coated with hexamethyldisiloxane (HMDSO) films via plasma-enhanced chemical vapor deposition (PECVD). The effects of etching time and film thickness on surface properties were evaluated using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), infrared reflection absorption spectroscopy (IRRAS), profilometry, and contact angle measurements. Oxygen plasma etching significantly altered the cellulose microstructure by increasing roughness and producing nanostructures. HMDSO deposition further modified surface chemistry, yielding water contact angles of ∼150° and diiodomethane contact angles of ∼120°. Among the tested conditions, the 144 nm HMDSO film showed optimal performance, preserving the nano-textured morphology and maintaining a stable superhydrophobic state over the aging period evaluated (45 days), with a contact angle hysteresis of ∼9° and a sliding (roll-off) angle of ∼7°. The combination of etching times (0–60 min) and HMDSO film thicknesses (144–910 nm) generated a broad range of adhesion levels — from pinned droplets that did not roll off even at 90° tilt to very low-adhesion surfaces — demonstrating highly tunable interfacial behavior. Overall, the integration of oxygen plasma etching and HMDSO film deposition provided an effective and environmentally friendly strategy for engineering cellulose surfaces. These modified surfaces have potential applications in self-cleaning materials, antifouling coatings, and lab-on-paper devices, highlighting the promise of plasma-based technologies for advancing functional cellulose-based materials with adaptable adhesion properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Plasma Applications and Diagnostics · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Modification in cellulose films through ascent cold plasma treatment and polymerization for food products packaging10.1016/j.tifs.2023.03.011 ↗
2. Recent advances in cellulose-based sustainable materials for wastewater treatment: an overview10.1016/j.ijbiomac.2023.128517 ↗
3. Hydrophobic cellulose-based sorbents for oil/water separation10.3390/molecules29194661 ↗
4. Superhydrophobic modification of cellulosic paper-based materials: fabrication, properties, and versatile applications10.1016/j.carbpol.2023.120570 ↗
5. Hydrophobization of lignocellulosic materials part II: chemical modification10.1007/s10570-022-04824-y ↗
6. Properties of fiber cement reinforced with cellulose pulp modified by plasma treatment with sulfur hexafluoride (SF6)10.1007/s10570-024-05885-x ↗
7. Recent advances in superhydrophobic and antibacterial cellulose-based fibers and fabrics: bio-inspiration, strategies, and applications10.1007/s42765-023-00297-1 ↗
8. Recent progress in cellulose hydrophobization by gaseous plasma treatments10.3390/polym16060789 ↗
9. Plasma-enhanced modification of polysaccharides for wastewater treatment: a review10.1016/j.carbpol.2020.117195 ↗
10. Rangel · 1999
11. Surface roughness and contact angle10.1021/j150474a015 ↗
12. Wetting of porous surfaces10.1039/tf9444000546 ↗
13. Hydrophilic to hydrophobic: ultrafast conversion of cellulose nanofibrils by cold plasma fluorination10.1016/j.apsusc.2021.152276 ↗
14. Hydrophobic functionalization of cellulosic substrate by tetrafluoroethane dielectric barrier discharge plasma at atmospheric pressure10.1016/j.carbpol.2020.117272 ↗
15. Effect of water-resistant properties of Kraft paper (KP) using sulfur hexafluoride (SF6) plasma coating10.3390/polym14183796 ↗
16. Hydrophobic modification of bacterial cellulose using oxygen plasma treatment and chemical vapor deposition10.1007/s10570-020-03005-z ↗
17. Optimizing a fabricating program for wearable super-hydrophobic cotton by clean production technology of plasma and reducing chemical consumption10.1016/j.jclepro.2020.124233 ↗
18. Superhydrophobic modification of the surface of cellulosic materials based on honeycomb-like zinc oxide structures and their application in oil–water separation10.1016/j.apsusc.2021.150291 ↗
19. Facile fabrication of hydrophobic cellulose-based organic/inorganic nanomaterial modified with POSS by plasma treatment10.1016/j.carbpol.2020.117193 ↗
20. Fabrication of a wearable directional moisture-transfer cotton by clean technology of wet plasma, without fluoride consumption10.1016/j.indcrop.2021.113995 ↗
21. Densification and hydration of HMDSO plasma polymers10.1002/ppap.201400118 ↗
22. Wettability and surface microstructure of polyamide 6 coated with SiOXCYHZ films10.1016/j.surfcoat.2015.03.051 ↗
23. Analysis of transport phenomena during plasma deposition of hydrophobic coatings on porous cellulosic substrates in plane-to-plane dielectric barrier discharges at atmospheric pressure10.1002/ppap.202000091 ↗
24. Highly hydrophobic organosilane-functionalized cellulose: a promising filler for thermoplastic composites10.3390/ma14082005 ↗
25. High-throughput tailoring of nanocellulose films: from complex bio-based materials to defined multifunctional architectures10.1021/acsabm.0c00576 ↗
26. Contribution of surface energy and roughness to the wettability of polyamide 6 and polypropylene film in the plasma-induced process10.1177/0040517515580511 ↗
27. Battaglin · 2016
28. Nielsen · 2011
29. Fabrication of “Roll-off” and “Sticky” superhydrophobic cellulose surfaces via plasma processing10.1021/la703766c ↗
30. Plasma-assisted etching of paper10.1007/BF01020410 ↗
31. Morphological and chemical effects of plasma treatment with oxygen (O2) and sulfur hexafluoride (SF6) on cellulose surface
32. Polymerization of styrene in a electrodeles glow discharge
33. Surface modification of poly(vinylidene fluoride) film by remote Ar, H2 , and O2 plasmas10.1016/S0032-3861(02)00872-8 ↗
34. The surface modification of cellulose fibres to create super-hydrophobic, oleophobic and self-cleaning properties10.1007/s10570-012-9812-3 ↗
35. Mascagni · 2009
36. Structure of low dielectric constant to extreme low dielectric constant SiCOH films: fourier transform infrared spectroscopy characterization10.1063/1.1618358 ↗
37. Investigation of gas phase species and deposition of SiO2 films from HMDSO/O2 plasmas10.1002/ppap.200500140 ↗
38. Organosilicon films deposited in low-pressure plasma from hexamethyldisiloxane — a review10.1016/j.vacuum.2021.110556 ↗
39. Analysis of the wetting state of super-repellent fabrics with liquids of varying surface tension10.1039/C5RA27281E ↗
40. Creation of superhydrophobic wood surfaces by plasma etching and thin-film deposition10.1016/j.surfcoat.2015.09.052 ↗
41. Plasma-polymerized coatings using HMDSO precursor for iron protection10.1016/S0300-9440(99)00077-6 ↗
42. Superhydrophobic modification of the surface of cellulosic materials based on honeycomb-like zinc oxide structures and their application in oil–water separation10.1016/j.apsusc.2021.150291 ↗
43. Super-hydrophobic cellulose nanofiber air filter with highly efficient filtration and humidity resistance10.1021/acsami.1c04258 ↗
44. Martinatti · 2011