Probing hard carbon fiber fabric synthesized by CO2 laser for Na-ion battery anodes
Source abstract
Abstract
This study investigates the optical and electrochemical performance of cotton-derived hard carbon fabrics structurally modified by CO 2 laser processing. The application of high laser power over a very short duration promotes rapid thermal treatment of materials, achieving up to 2000 °C. Despite the complexity of the hard carbon structure, detailed insights into its structural organization are significantly enhanced through complementary Raman mapping, which not only reveals the degree of structural ordering but also establishes correlations with the material's electrochemical performance as anodes in sodium-ion batteries. The results reveal that the material discharge capacity initially increases from 275 mAh g −1 at a current density of 18.6 mA g − 1 for a treatment temperature of 900 °C, to a value of 309 mAh g −1 at 1600 °C, before subsequently decreasing to 230 mAh g −1 at 2000 °C. • Carbonized Cotton fabrics converted into locally structured hard carbon via rapid CO 2 laser processing. • Laser treatment achieves structural reorganization up to 2000 °C within seconds. • Raman mapping reveals correlations between microstructure and electrochemistry. • Optimized treatment (1600 °C) yields high Na-ion storage capacity (254 mAh g −1 ). • Demonstrates scalable and energy-efficient route for sustainable anode materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Fiber-reinforced polymer composites · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
2. Na-ion versus Li-ion batteries: complementarity rather than competitiveness10.1016/j.joule.2020.06.003 ↗
3. Slope-dominated carbon anode with high specific capacity and superior rate capability for high safety Na-Ion batteries10.1002/anie.201900005 ↗
4. First-principles study of alkali metal-graphite intercalation compounds10.1016/j.jpowsour.2013.06.057 ↗
5. Novel hybrid of amorphous Sb/N-doped layered carbon for high-performance sodium-ion batteries10.1016/j.cej.2020.127169 ↗
6. Compact Sn/C composite realizes long-life sodium-ion batteries10.1007/s12274-022-4255-0 ↗
7. Advanced anode materials for rechargeable sodium-ion batteries10.1021/acsnano.3c02892 ↗
8. Sodium insertion in carboxylate based materials and their application in 3.6 V full sodium cells10.1039/c2ee22864e ↗
9. All organic sodium‐ion batteries with Na 4 C 8 H 2 O 610.1002/anie.201400032 ↗
10. Unraveling the storage mechanism in organic carbonyl electrodes for sodium-ion batteries10.1126/sciadv.1500330 ↗
11. α-MoO3: a high performance anode material for sodium-ion batteries10.1016/j.elecom.2013.02.020 ↗
12. Surface-controlled sodium-ion storage mechanism of Li4Ti5O12 anode10.1016/j.ensm.2022.11.017 ↗
13. 1T-MoS2 monolayer as a promising anode material for (Li/Na/Mg)-ion batteries10.1016/j.apsusc.2022.152537 ↗
14. Structure-designed synthesis of FeS2@C yolk–shell nanoboxes as a high-performance anode for sodium-ion batteries10.1039/C7EE01100H ↗
15. The mechanisms of lithium and sodium insertion in carbon materials10.1149/1.1379565 ↗
16. Expanded graphite as superior anode for sodium-ion batteries10.1038/ncomms5033 ↗
17. Reduced graphene oxide with superior cycling stability and rate capability for sodium storage10.1016/j.carbon.2013.01.064 ↗
18. Hard carbon as anode material for metal-ion batteries10.59761/RCR5100 ↗
19. High capacity anode materials for rechargeable sodium-ion batteries10.1149/1.1393348 ↗
20. Present development and future perspectives on biowaste-derived hard carbon anodes for room temperature sodium-ion batteries10.1016/j.jpowsour.2024.234347 ↗
21. Tracking sodium cluster dynamics in hard carbon with a low specific surface area for sodium‐ion batteries10.1002/aenm.202304300 ↗
22. Effect of pre-treatment conditions on the electrochemical performance of hard carbon derived from bio-waste10.1039/D4RA08029G ↗
23. Electrochemical Na insertion and solid electrolyte interphase for hard‐carbon electrodes and application to Na‐ion batteries10.1002/adfm.201100854 ↗
24. Properties and sodium insertion behavior of phenolic Resin-based hard carbon microspheres obtained by a hydrothermal method10.1016/j.jelechem.2015.07.032 ↗
25. Hard carbons derived from green phenolic resins for Na-ion batteries10.1016/j.carbon.2018.06.036 ↗
26. Electrochemical insertion of sodium into hard carbons10.1016/S0013-4686(02)00250-5 ↗
27. Laser synthesis of hard carbon for anodes in Na‐ion battery10.1002/admt.201600227 ↗
28. Trash to treasure: from harmful algal blooms to high-performance electrodes for sodium-ion batteries10.1021/acs.est.5b03882 ↗
29. Algae-derived hard carbon anodes for Na-ion batteries10.1007/s10800-021-01609-2 ↗
30. Hard carbon derived from avocado peels as a high-capacity, fast Na + diffusion anode material for sodium-ion batteries10.1149/2754-2734/ac8aaf ↗
31. Insights on the Na+ ion storage mechanism in hard carbon: discrimination between the porosity, surface functional groups and defects10.1016/j.nanoen.2017.12.013 ↗
32. Hollow carbon nanospheres with superior rate capability for sodium‐based batteries10.1002/aenm.201100691 ↗
33. New template synthesis of anomalously large capacity hard carbon for Na- and K-Ion batteries10.1002/aenm.202302647 ↗
34. Chemical structure and properties of cotton
35. World cotton production and consumption: an overview
36. Hard carbon microtubes made from renewable cotton as high‐performance anode material for sodium‐ion batteries10.1002/aenm.201600659 ↗
37. A renewable natural cotton derived and nitrogen/sulfur co-doped carbon as a high-performance sodium ion battery anode10.1016/j.mtener.2018.02.001 ↗
38. Flexible P-Doped carbon cloth: vacuum-sealed preparation and enhanced Na-Storage properties as binder-free anode for sodium ion batteries10.1021/acsami.7b01986 ↗
39. Effect of carbonization behaviour of cotton biomass in electrodes for sodium‐ion batteries10.1002/celc.202300281 ↗
40. Probing symmetry-breaking defects in polished graphitizable s p 2 carbons using angle-resolved polarized raman scattering10.1103/PhysRevB.107.134305 ↗
41. Resonant Raman scattering of anthracene‐based carbons in the secondary carbonization stage10.1002/jrs.6051 ↗
42. J Raman Spectroscopy - 2023 - Kumar - Determination of the Longitudinal Thermal Conductivity of Low‐Ordered Carbon Fibers.Pdf, (n.d.).
43. In situ Raman spectroscopy for growth monitoring of vertically aligned multiwall carbon nanotubes in plasma reactor10.1063/1.4902915 ↗
44. Studying disorder in graphite-based systems by Raman spectroscopy10.1039/B613962K ↗
45. Quantifying ion-induced defects and Raman relaxation length in graphene10.1016/j.carbon.2009.12.057 ↗
46. Quantifying defects in graphene via raman spectroscopy at different excitation energies10.1021/nl201432g ↗
47. An in situ small-angle X-Ray scattering study of sodium insertion into a nanoporous carbon anode material within an operating electrochemical cell10.1149/1.1394081 ↗
48. New mechanistic insights on Na-Ion storage in nongraphitizable carbon10.1021/acs.nanolett.5b01969 ↗
49. Extended “Adsorption–Insertion” model: a new insight into the sodium storage mechanism of hard carbons
50. Controlling intercalation sites of hard carbon for enhancing Na and K storage performance10.1016/j.cej.2021.128490 ↗