journal article·2026-02Open access

Improving the bonding strength of copper/steel joint in the laser lap welding by applying rolling force

Qian Sun, Kang Zhang, Yiyi Xue, Zhenxing Li, Xiaonan Wang, Jie Chen

Abstract

To overcome the deterioration of welding joint caused by crack defects during Cu/304 stainless steel (SS) dissimilar laser welding, a post-weld rolling technique was developed. By applying rolling immediately after welding, the bonding quality of Cu/304SS was successfully improved. In this work, continuous fiber laser was employed for lap welding of T2 Cu/304 SS, followed by the application of 1000–2000 N rolling pressure. The effects of rolling process on weld microstructure and mechanical properties were investigated. Experimental results indicated that the copper segregation at cellular grain boundaries formed copper-rich reticulated γ-Fe phases, which served as potential crack initiation sites. Due to the thermal stress, cracks propagated along grain boundaries, leading to the fracture in the weld zone of lap joints. The density and maximum length of cracks were decreased by applying 2000 N rolling force, and the maximum tensile load was increased by 33.2 %. Simulation results demonstrated the welding residual stress was decreased effectively, thereby inhibiting the crack propagation. This research provides new insights for the control of residual stress and suppression of cracks in the copper/stainless steel laser welding.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Advancements in Materials Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Blue laser welding of multi-layered AISI 316L stainless steel micro-foils10.1016/j.optlastec.2020.106498 ↗
2. A review on friction-based joining of dissimilar aluminum-steeljoints10.1557/jmr.2018.332 ↗
3. Recent development of improved clinching process10.1007/s00170-020-05978-4 ↗
4. A review on dissimilar laser welding of steel-copper, steel-aluminum, aluminum-copper, and steel-nickel for electric vehicle battery manufacturing10.1016/j.optlastec.2021.107595 ↗
5. Interface microstructure and mechanical properties of copper/304 stainless steel dissimilar joint assisted by Ni transition layer using ultrasonic additive manufacturing (UAM)10.1016/j.matlet.2022.133552 ↗
6. Effect of Cu content on microstructure transformation and mechanical properties of Fe-Al dissimilar laser welded joints10.1016/j.optlastec.2020.106078 ↗
7. Electron beam welding of 304 stainless steel to QCr0.8 copper alloy with copper filler wire10.1016/S1003-6326(14)63569-X ↗
8. Porosity and liquation cracking of dissimilar Nd:YAG laser welding of SUS304 stainless steel to T2 copper10.1016/j.optlastec.2019.105881 ↗
9. Investigations on laser welding of dissimilar joints of stainless steel and copper for hot crack prevention10.2351/7.0000489 ↗
10. Formation mechanism and control of solidification cracking in laser-welded joints of steel/copper dissimilar metals10.3390/met12071147 ↗
11. Microstructural characteristics of a stainless steel/copper dissimilar joint made by laser welding10.1007/s11661-013-1693-z ↗
12. Nd:yttritium-aluminum-garnet laser welding of copper to stainless steel10.2351/1.1642635 ↗
13. Effect of disk laser beam offset on the microstructure and mechanical properties of copper-AISI 304 stainless steel dissimilar metals joints10.3390/met10101294 ↗
14. Wire-feeding laser welding of copper/stainless steel using different filler metals10.3390/ma14092122 ↗
15. Microstructures and mechanical properties of copper-stainless steel butt-welded joints by MIG-TIG double-sided arc welding10.1016/j.jmatprotec.2018.10.007 ↗
16. Microstructures and mechanical properties of laser-arc hybrid welded dissimilar pure copper to stainless steel10.1016/j.optlastec.2018.09.050 ↗
17. Effects on microstructural refinement of mechanical properties in steel-copper joints laser welded with alternating magnetic field augmentation10.1016/j.matchar.2021.111059 ↗
18. Microstructure evolution during laser pressure welding of pure aluminum10.1016/j.matlet.2019.126931 ↗
19. Laser pressure welding of aluminium and galvannealed steel10.1080/09507110902836895 ↗
20. Laser pressure welding of dissimilar aluminium and copper: microstructure and mechanical property10.1080/13621718.2021.2010449 ↗
21. Laser pressure welding of copper10.1016/j.optlastec.2020.106645 ↗
22. Hardness distribution and aging response associated with precipitation behavior in a laser pressure welded Al-Li alloy 219810.1016/j.msea.2021.140946 ↗
23. Dissimilar metal joining of steel and titanium by laser roll welding10.1007/BF03266542 ↗
24. Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses10.1016/j.jmatprotec.2017.04.020 ↗
25. First-principles study on the interfacial segregation at coherent Cu precipitate/Fe matrix interface10.1016/j.scriptamat.2020.03.053 ↗