journal article·2026-02

Impact of mechanochemical activation on the thermal and morphological characteristics of silver-doped pyrophyllite

Sara Mijaković, Branislav Stanković, Jasmina Grbović Novaković, Nenad Filipović, Ljubisav Stamenić, Nebojša Manić, Ana Vujačić Nikezić

Publisher page

Abstract

This study deals with the influence of milling time and silver content on the structural, morphological, and thermal properties of pyrophyllite/Ag nanocomposites, which were produced using mechanical milling as a green synthesis method. Pyrophyllite was mechanochemically activated with AgNO3 (2, 5, and 10 wt% of silver), while the milling time varied from 20 to 320 min. A detailed kinetic analysis of the dehydroxylation reaction, followed by thorough microstructural and morphological analysis obtained by XRD, FTIR, SEM/EDS, PSD, TGA/DTA, was performed. With the increase in milling time, notable particle size reduction and pronounced agglomeration occurred, including the disruption of pyrophyllite's crystalline structure and its amorphization. The XRD diffraction maximum at 2θ of 38.16°of the sample milled for 20 min with 10 wt% of AgNO3 corresponds to metallic silver. EDS mapping confirmed uniform dispersion of silver throughout the composite surface. The conversion curves were modelled as a linear combination of two Weibull functions. At lower temperatures, the highest value of the rate constant was obtained for the 10Ag80 sample, while the 10Ag20 sample underwent the fastest dehydroxylation. The apparent activation energy values, calculated using the isoconversional method, showed the highest value at the beginning of the dehydroxylation reaction, approximately 210 kJ mol−1. Following a sharp drop to the values of 194 kJ mol−1 (5Ag20 sample), 193 kJ mol−1 (10Ag20 sample), and 187 kJ mol−1 (10Ag80 sample), a re-increase in energy values towards the end of the reaction is seen. The obtained results also indicated that the value of the rate constant is influenced more by the milling time than by the added AgNO3 weight fraction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Clay minerals and soil interactions · Magnetic Properties and Synthesis of Ferrites · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Influence of mechanochemical activation on the thermal behavior of pyrophyllite10.2298/SOS220715018M ↗
2. Synthetic talc and talc-like structures: preparation, features and applications10.1002/chem.201702763 ↗
3. Dixon · 2002
4. Fly ash and zeolite decrease metal uptake but do not improve rice growth in paddy soils contaminated with Cu and Zn10.1016/j.envint.2019.04.032 ↗
5. Bentonite application in the remediation of zinc contamination soil
6. Clay and non-clay minerals in the pharmaceutical industry: part I. Excipients and medical applications10.1016/j.clay.2009.07.017 ↗
7. Clays as biomaterials in controlled drug Release-A scientific and technological short review
8. The use of some clay minerals as natural resources for drug carrier applications10.3390/jfb9040058 ↗
9. Recent trends in analytical applications of organically modified silicate materials10.1016/S0165-9936(01)00125-X ↗
10. Organo-functional modified pyrophyllite: preparation, characterisation and Pb (II) ion adsorption property10.1016/j.clay.2003.12.005 ↗
11. Thermal stability and antimicrobial properties of pure and modified pyrophyllite (PYRO/Ag) clay10.1007/s10973-022-11303-w ↗
12. Comparative study of powder characteristics and mechanical properties of Al2024 nanocomposites reinforced with carbon-based additives10.1016/j.apt.2025.104835 ↗
13. Synthesis of hydroxyapatite matrix Ag and CNT particle reinforced hybrid biocomposites with improved mechanical and antibacterial properties10.1515/ijmr-2023-0120 ↗
14. Effect of different PCA types on morphology, physical, thermal and mechanical properties of AA2024-B4C composites10.1016/j.powtec.2024.119373 ↗
15. Investigation of microstructural, hardness, and wear properties of AlCrCuFeNi high entropy alloys produced by hot-pressing with the enhancement of manufacturability through electroless Ag incorporation10.1016/j.triboint.2024.110277 ↗
16. Preparation and characterization of modified kaolin by a mechanochemical method10.3390/ma16083099 ↗
17. Raman spectroscopy study of structural changes in pyrophyllite ore minerals induced by mechanochemical milling
18. Effects of mechanical treatment on X‐ray diffraction line broadening in pyrophyllite10.1111/j.1151-2916.1993.tb03704.x ↗
19. Gold sorption by silicates in acidic and alkaline chloride media10.1016/j.minpro.2011.05.013 ↗
20. Catalytic efficiency of Cu-supported pyrophyllite in heterogeneous catalytic oxidation of phenol10.1007/s13369-019-03757-2 ↗
21. Synthetic ferripyrophyllite: preparation, characterization and catalytic application10.1039/D0DT03125A ↗
22. Use of pyrophyllite as soil conditioner in lettuce production
23. Silver–clay nanohybrid structure for effective and diffusion-controlled antimicrobial activity10.1016/j.msec.2011.08.007 ↗
24. Kinetic pathway for thermal exfoliation of pyrophyllite10.1016/j.clay.2015.05.006 ↗
25. Study of the dehydroxylation–rehydroxylation of pyrophyllite10.1111/j.1551-2916.2010.03750.x ↗
26. Non-isothermal kinetic evaluation of pyrophyllite dehydroxylation10.1080/0371750X.2014.922434 ↗
27. High-temperature dehydration of talc: a kinetics study using in situ X-ray powder diffraction10.1080/01411594.2014.1002092 ↗
28. New insight into the structural transformation of partially dehydroxylated pyrophyllite10.2138/am.2011.3605 ↗
29. Investigation of the thermal behaviour and decomposition kinetics of kaolinite10.1180/claymin.2015.050.2.04 ↗
30. The kinetics of dehydroxylation of kaolinite10.1180/claymin.1987.022.4.08 ↗
31. Kinetics of dehydroxylation and evaluation of the crystallinity of kaolinite10.1016/0040-6031(83)80198-1 ↗
32. Kinetics of dehydroxylation and decarburization of coal series kaolinite during calcination: a novel kinetic method based on gaseous products10.3390/ma14061493 ↗
33. Dehydroxylation kinetics of clay minerals and its application to friction heating along an imbricate thrust in an accretionary prism
34. Kinetics of the dehydroxylation and mullitization processes of the halloysite from the farbani potok locality, Serbia10.1016/S0169-1317(97)00011-2 ↗
35. Kinetics of illite dehydroxylation10.1007/s00269-006-0092-z ↗
36. Effect of mechanical milling time on powder characteristic, microstructure, and mechanical properties of AA2024/B4C/GNPs hybrid nanocomposites10.1016/j.powtec.2024.120439 ↗
37. Determination of nano-graphene content for improved mechanical and tribological performance of Zn-based alloy matrix hybrid nanocomposites10.1016/j.jallcom.2024.175152 ↗
38. The kinetics analyses of isothermal dehydration of PDMAA hydrogel by application of dispersive kinetics model10.1007/s10973-022-11212-y ↗
39. Mechanical activation of pyrophyllite ore for aluminum extraction by acidic leaching10.1007/s10853-018-2606-8 ↗
40. Influence of grinding and sonication on the crystal structure of talc10.1346/CCMN.2015.0630405 ↗
41. Effects of dry grinding on pyrophyllite10.1180/claymin.1988.023.4.07 ↗
42. Pyrophyllite: an economic mineral for different industrial applications10.3390/app112311357 ↗
43. The beneficiation of the pütürge pyrophyllite ore by flotation: mineralogical and chemical evaluation10.1180/clm.2022.24 ↗
44. Study of microstructural, mechanical, thermal and tribological properties of graphene oxide reinforced Al–10Ni metal matrix composites prepared by mechanical alloying method
45. Investigation of solid‐solution phase formation in AlCuNiSi medium entropy alloys and its effect on microstructural, thermal, and microhardness properties10.1002/adem.202402843 ↗
46. Effect of Ti content and ball-milling time on the microstructural, thermal, and microhardness properties of AlCoCuNiTi high entropy alloys10.1016/j.matchemphys.2023.128591 ↗
47. Dry grinding effect on pyrophyllite–quartz natural mixture and its influence on the structural alternation of pyrophyllite10.1016/j.micron.2014.12.005 ↗
48. Near-infrared spectroscopy study of OH stretching modes in pyrophyllite and talc10.3390/cryst12121759 ↗
49. Effects of grinding on the preg-robbing behaviour of pyrophyllite10.1016/j.hydromet.2014.04.007 ↗
50. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
51. Thermal transformations of sonicated pyrophyllite10.1016/j.clay.2003.03.003 ↗
52. Thermal behavior of pyrophyllite ore during calcination for thermal activation for aluminum extraction by acid leaching10.1007/s42860-019-00061-w ↗
53. Pyrophyllite as raw material for ceramic applications in the perspective of its pyro-chemical properties10.1016/j.ceramint.2009.10.026 ↗
54. The kinetics of non-isothermal dehydration of equilibrium swollen Ca-alginate hydrogel10.1007/s10973-020-10020-6 ↗
55. Investigation of fractal-like characteristics according to new kinetic equation of desorption10.1021/acs.langmuir.0c03240 ↗
56. DFT research on the dehydroxylation reaction of pyrophyllite 1. First-principle molecular dynamics simulations10.1021/jp711278s ↗
57. Kinetics of partial dehydroxylation in dioctahedral 2: 1 layer clay minerals10.2138/am.2012.3971 ↗
58. Application of the suzuki–fraser function in modelling the non-isothermal dehydroxylation kinetics of fullerol10.1007/s11144-018-1380-6 ↗
59. Application of logistic function to describe kinetics of non-isothermal dehydroxylation of fullerol10.1007/s10973-019-08222-8 ↗