journal article·2026-01

The etching and graphene oxide co-modified Al current collector for stable and ultrafast lithium-ion batteries

Susu Chen, Wei Guo, Liyang Lin, Zhen Wei, Wei Chen, Ning Hu

Publisher page

Abstract

Lithium-ion batteries (LIBs) with both ultrafast charge/discharge and long cycle lifetimes are being demanded by the growing performance requirements of diverse industries. And surface-interface modification of the current collectors is significant for LIBs high-rate and long-cycle performance improvement. In this work, graphene oxide (GO) coating and thermochemical etching were used to successfully prepare a particular Al current collector. The samples were systematically analyzed by SEM, ESD, AFM, and XPS. The half cell was assembled with LiMn0.5Co0.2Mn0.3O2 (NCM523)/Al as the cathode, commercial Li foil as the anode, and LiPF6 as the electrolyte, exhibiting the better high-rate performance (76.81 mAh/g at 10C) and the long-cycle performance (115.28/64.41 mAh/g with the capacity retention of 81.78%/83.1% at 1C/10C after 500 cycles). The particular co-modified Al current collector provides a meaningful idea for the cathode design of stable and ultrafast LIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Nanoscale mapping of ion diffusion in a lithium-ion battery cathode10.1038/nnano.2010.174 ↗
2. A reflection on lithium-ion battery cathode chemistry10.1038/s41467-020-15355-0 ↗
3. 3D few-layered MoS2/graphene hybrid aerogels on carbon fiber papers: a free-standing electrode for high-performance lithium/sodium-ion batteries10.1016/j.cej.2020.125592 ↗
4. Tunneled mesoporous carbon nanofibers with embedded ZnO nanoparticles for ultrafast lithium storage10.1021/acsami.7b01286 ↗
5. Interfacial engineering of a heteroatom-doped graphene layer on patterned aluminum foil for ultrafast lithium storage kinetics10.1021/acsami.0c01774 ↗
6. Stable fast-charging electrodes derived from hierarchical porous carbon for lithium-ion batteries10.1002/er.6067 ↗
7. Lithium storage kinetics of highly conductive F-doped SnO2 interfacial layer on lithium manganese oxide surface10.1016/j.apsusc.2019.144057 ↗
8. Interface engineering of few-layered MoS2 nanosheets with ultrafine TiO2 nanoparticles for ultrastable Li-ion batteries10.1016/j.cej.2018.03.166 ↗
9. Interface-engineered current collectors for improved rate performance in solid-state lithium-ion batteries10.1016/j.jallcom.2025.181961 ↗
10. Crater-like architectural aluminum current collectors with superior electrochemical performance for Li-ion batteries10.1016/j.jelechem.2017.05.017 ↗
11. Interface modification of an Al current collector for ultrafast lithium-ion batteries10.1016/j.apsusc.2019.01.016 ↗
12. Industrial Scalability of zinc-ion batteries: enhanced electrochemical performance with high mass Loading electrodes on graphene-coated metal current collectors
13. Electrochemical performance of cathodes prepared on current collector with different surface morphologies10.1016/j.jpowsour.2013.02.021 ↗
14. High-adhesion zinc anode protective film with metal-ion-doped conductive polymer-coated carbon nanotubes for zinc ion batteries10.1016/j.nanoen.2025.111203 ↗
15. Mechanically robust and water-trapping separators for zinc-ion batteries via hydrophilic surface engineering10.1016/j.jechem.2025.07.049 ↗
16. Multifunctional zinc Vanadium oxide layer on metal anodes via Ultrathin surface coating for enhanced stability in aqueous zinc-ion batteries10.1021/acsenergylett.4c02573 ↗
17. Electrochemical behavior of Al current collector of rechargeable lithium batteries in propylene carbonate with LiCF3SO3, Li(CF3SO2)2N, or Li(C4F9SO2)(CF3SO2)N10.1149/1.1433471 ↗
18. Enabling aqueous binders for lithium battery cathodes e Carbon coating of aluminum current collector10.1016/j.jpowsour.2013.10.039 ↗
19. Graphene oxide as a corrosion inhibitor for the aluminum current collector in lithium ion batteries10.1016/j.carbon.2012.09.013 ↗
20. Anode surface engineering of zinc-ion batteries using tellurium nanobelt as a protective layer for enhancing energy storage performance10.1016/j.jechem.2024.01.019 ↗
21. Surface protection and nucleation enhancement of zinc anode with graphene and doped carbon nanotubes for high-performance energy storage10.1016/j.cej.2023.147303 ↗
22. Integrated solution for a stable and high-performance zinc-ion battery using an electrolyte additive
23. Patterned anodes with an activated carbon nanotube protective layer for zinc-ion hybrid capacitors10.1016/j.jallcom.2023.171229 ↗
24. Punched and folded electrode design for high-rate zinc-ion batteries with high volumetric energy density10.1016/j.jpowsour.2023.233396 ↗
25. Enhanced spontaneous self-charging through scalable template-free surface engineering at building block fiber scale for wearable electronics10.1016/j.nanoen.2022.107891 ↗
26. Hybrid nanocomposites of tunneled-mesoporous sulfur-doped carbon nanofibers embedded with zinc sulfide nanoparticles for ultrafast lithium storage capability10.1016/j.jallcom.2020.157206 ↗
27. XPS and structural studies of high quality graphene oxide and reduced graphene oxide prepared by different chemical oxidation methods10.1016/j.ceramint.2019.04.165 ↗
28. Fabrication of super slippery sheet-layered and porous anodic aluminum oxide surfaces and its anticorrision property10.1016/j.apsusc.2015.07.140 ↗
29. Water-soluble non-polymeric electrospun cyclodextrin nanofiber template for the synthesis of metal oxide tubes by atomic layer deposition10.1039/C4RA12073F ↗
30. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2 via titanium and boron co-doping10.1016/j.ceramint.2020.09.143 ↗
31. Improved electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode materials via incorporation of rubidium cations into the original Li sites10.1039/C7RA10053A ↗
32. In situ formed LiNi0.8Co0.15Al0.05O2@ Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries10.1016/j.nanoen.2018.09.014 ↗
33. Effects of reheating temperature on the structure, morphology and electrochemical performance of Ni-rich cathode materials10.1016/j.jallcom.2021.160098 ↗