journal article·2026-01Open access

Nanoscale physical and chemical innovation of strontium-incorporated biphasic calcium phosphate coatings via sol-gel Technology: Enhancing osteogenic potential and biocompatibility of 3D titanium implants

Kaung Khant Ye Mon, Yu-Lin Kuo, Jyh-Wei Lee, Yun-Jung Lee, Ying-Sui Sun, Wei-Jen Chang

Abstract

Background To enhance osteogenic activity and reduce infection risk, the titanium implant surface is modified via sandblasting, acid etching, and alkali treatment to create a 3D structure. Strontium (Sr), a bioactive element, promotes osteogenesis when added to biomaterials. Biphasic Calcium Phosphate (BCP), similar to bone minerals, supports osteoinduction. Sr-BCP was incorporated onto the nanoscale titanium surface using sol-gel coating to promote early osseointegration. Aim This study aims to fabricate a nanostructured 3D Ti surface that enables the uniform deposition of Sr-BCP coating, thereby integrating dual-phase bioactivity. Through this modification, it is expected to enhance the physicochemical properties and biocompatibility of Ti implants. Methods Ti discs were pretreated using sandblasting, acid etching, and alkali treatment to produce a hierarchical 3D surface. Sr-BCP coatings were applied using a sodium alginate-stabilized sol-gel solution via dip-coating. Surface characterization was performed using SEM, EDS, XRD, XPS, FTIR, contact angle, and roughness analyses. Biocompatibility was assessed using MG63, L929, and MC3T3-E1 cells with the AlamarBlue assay. Results The modified titanium surfaces exhibited improved wettability, topography, and surface chemistry. XRD and XPS confirmed the presence of hydroxyapatite (HA), β-TCP, and SrNO 3 . SEM images showed well-distributed, crack-free coatings with no visible detachment. Cell viability assays indicated good biocompatibility and enhanced proliferation in low-alginate Sr-BCP groups. Conclusion These findings demonstrate the successful construction of the 3D structure surface and the potential of Sr-BCP sol-gel coatings to enhance surface functionality and cytocompatibility of nanostructured Ti implants.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. On osseointegration in relation to implant surfaces10.1111/cid.12742 ↗
2. Surface roughness of dental implant and osseointegration10.1007/s12663-020-01437-5 ↗
3. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw10.1016/S0300-9785(81)80077-4 ↗
4. Osteogenic activity of titanium surfaces with hierarchical micro-/nano-structures obtained by hydrofluoric acid treatment10.2147/IJN.S123930 ↗
5. Effects of titanium surfaces blasted with TiO2 particles on the initial attachment of cells derived from human mandibular bone: a scanning electron microscopic and histomorphometric analysis
6. Early osseointegration driven by the surface chemistry and wettability of dental implants10.1590/1678-775720140483 ↗
7. Effects of titanium surface topography on bone integration: a systematic review10.1111/j.1600-0501.2009.01775.x ↗
8. Classification of osseointegrated implant surfaces: materials, chemistry and topography10.1016/j.tibtech.2009.12.003 ↗
9. Early loading of non‐submerged titanium implants with a sandblasted and acid‐etched surface: 5‐Year results of a prospective study in partially edentulous patients10.1111/j.1600-0501.2005.01209.x ↗
10. The effects of acid concentration, etching temperature and time on the surface morphologies of Ti6Al4V
11. Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs10.1002/jbm.820250708 ↗
12. On implant surfaces: a review of current knowledge and opinions
13. Positive modulation of osteogenesis on a titanium oxide surface incorporating strontium oxide: an in vitro and in vivo study10.1016/j.msec.2019.02.013 ↗
14. Effects of long-term strontium ranelate treatment on vertebral fracture risk in postmenopausal women with osteoporosis10.1007/s00198-008-0825-6 ↗
15. The biological role of strontium10.1016/j.bone.2004.04.026 ↗
16. Stimulations of strontium-doped calcium polyphosphate for bone tissue engineering to protein secretion and mRNA expression of the angiogenic growth factors from endothelial cells in vitro10.1016/j.ceramint.2013.12.027 ↗
17. Bioceramics of calcium orthophosphates10.1016/j.biomaterials.2009.11.050 ↗
18. Calcium orthophosphates in medicine: from ceramics to calcium phosphate cements10.1016/S0020-1383(00)80022-4 ↗
19. Properties of osteoconductive biomaterials: calcium phosphates10.1097/00003086-200202000-00009 ↗
20. Biphasic calcium phosphate concept applied to artificial bone, implant coating and injectable bone substitute10.1016/S0142-9612(98)00061-1 ↗
21. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
22. Current state of the art of biphasic calcium phosphate bioceramics10.1023/A:1022842404495 ↗
23. Evaluation of hydroxyapatite and beta-tricalcium phosphate mixed with bone marrow aspirate as a bone graft substitute for posterolateral spinal fusion10.4103/0019-5413.49387 ↗
24. Biphasic calcium phosphate bioceramics: preparation, properties and applications10.1023/A:1022872421333 ↗
25. Nanomaterial fabrication through the modification of sol–gel derived coatings10.3390/nano11010181 ↗
26. Nanomaterial by sol-gel method: synthesis and application10.1155/2021/5102014 ↗
27. Alginate composites for bone tissue engineering: a review10.1016/j.ijbiomac.2014.07.008 ↗
28. Alginate: properties and biomedical applications10.1016/j.progpolymsci.2011.06.003 ↗
29. Enhanced functions of osteoblasts on nanophase ceramics10.1016/S0142-9612(00)00075-2 ↗
30. Influence of dental implant surface modifications on osseointegration and biofilm attachment10.3390/coatings12111654 ↗
31. Surface modification of titanium by etching in concentrated sulfuric acid10.1016/j.dental.2005.09.007 ↗
32. Nanomechanical and nanotribological properties of bioactive titanium surfaces prepared by alkali treatment10.1016/j.jmbbm.2010.07.005 ↗
33. Sol-gel-derived hydroxyapatite powders and coatings10.1023/A:1012462332440 ↗
34. Impact of post-heat-treatment on the surface-roughness, residual stresses, and micromorphology characteristics of plasma-sprayed pure hydroxyapatite and 7%-Aloxite reinforced hydroxyapatite coatings deposited on titanium alloy-based biomedical implants10.1016/j.jmrt.2022.03.065 ↗
35. Performing elemental microanalysis with high accuracy and high precision by scanning electron microscopy/silicon drift detector energy-dispersive X-ray spectrometry (SEM/SDD-EDS)10.1007/s10853-014-8685-2 ↗
36. Characterization of titanium surface modification strategies for osseointegration enhancement10.3390/met11040618 ↗
37. Surface characterization of alkali-and heat-treated Ti with or without prior acid etching10.1016/j.apsusc.2011.12.119 ↗
38. Antimicrobial peptides on calcium phosphate-coated titanium for the prevention of implant-associated infections10.1016/j.biomaterials.2010.08.035 ↗
39. A biomimetic calcium phosphate nanowire coating on titanium surface enhances osteoimmunomodulation and osteointegration10.1016/j.compositesb.2024.111480 ↗
40. XPS study of apatite-based coatings prepared by sol–gel technique10.1016/S0169-4332(99)00267-6 ↗
41. Surface modification of additively fabricated titanium-based implants by means of bioactive micro-arc oxidation coatings for bone replacement10.3390/jfb13040285 ↗
42. Surface modification of titanium, titanium alloys, and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
43. Photocatalytic and dye-sensitized solar cell performances of {010}-faceted and [111]-faceted anatase TiO2 nanocrystals synthesized from tetratitanate nanoribbons10.1021/am503914q ↗
44. Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants10.1016/j.biomaterials.2007.10.023 ↗
45. Chitosan composites for bone tissue Engineering—An overview10.3390/md8082252 ↗
46. Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications10.1016/j.surfcoat.2017.10.079 ↗
47. Electrochemical response of (β-TCP and HA) individual coatings and [β-TCP/HA] multilayers coatings exposed to biocompatible environments10.1016/j.surfcoat.2022.128266 ↗
48. Effects of different titanium surface treatments on adhesion, proliferation and differentiation of bone cells: an in vitro study10.3390/jfb13030143 ↗
49. A high bioactive alkali-treated titanium surface induced by induction heat treatment10.1016/j.surfcoat.2020.125362 ↗
51. Influence of surface treatments developed for oral implants on the physical and biological properties of titanium.(I) surface characterization10.1034/j.1600-0501.1997.080307.x ↗
52. Roughness induced dynamic changes of wettability of acid etched titanium implant modifications10.1016/j.biomaterials.2003.08.015 ↗
53. Improved osseointegration of long-term stored SLA implant by hydrothermal sterilization10.1016/j.jmbbm.2015.08.038 ↗
54. Osteoblasts behavior on chemically treated commercially pure titanium surfaces10.1002/jbm.a.34855 ↗
55. Osteoblast adhesion and matrix mineralization on sol–gel-derived titanium oxide10.1016/j.biomaterials.2005.11.014 ↗
56. In vitro investigation of anodization and CaP deposited titanium surface using MG63 osteoblast-like cells10.1016/j.apsusc.2009.11.078 ↗
57. Strontium ranelate: a novel mode of action optimizing bone formation and resorption10.1007/s00198-004-1753-8 ↗
58. Strontium-substituted hydroxyapatite coatings synthesized by pulsed-laser deposition: in vitro osteoblast and osteoclast response10.1016/j.actbio.2008.05.005 ↗
59. Strontium-substituted submicrometer bioactive glasses modulate macrophage responses for improved bone regeneration10.1021/acsami.6b10378 ↗
60. The effect of strontium-substituted hydroxyapatite coating on implant fixation in ovariectomized rats10.1016/j.biomaterials.2010.07.112 ↗
61. Osteoblast response to porous titanium surfaces coated with zinc-substituted hydroxyapatite10.1016/j.tripleo.2011.02.049 ↗
62. Study of the in vitro cytotoxicity testing of medical devices10.3892/br.2015.481 ↗
63. Strontium enhances osteogenic differentiation of mesenchymal stem cells and in vivo bone formation by activating wnt/catenin signaling10.1002/stem.646 ↗