journal article·2025-10Open access

Influence of temperature on the tribological properties of heterostructure [Al2O3/Si3N4]n

C.H. Ortiz, M.I. Velasco, J.J Armero Orozco, I.J. Castro, J.C. Caicedo

Abstract

[Al 2 O 3 /Si 3 N 4 ] Multilayer coatings have been implemented as a protective coating on various engineering devices. Current research evidenced their optimum tribological properties. But these investigations are carried out at room temperature. Therefore, this research analyzes the wear rate of the [Al 2 O 3 /Si 3 N 4 ] heterostructure subjected to tribological test at varying temperature. The results showed that by increasing the temperature inside the chamber (up to 350°C), tribo-mechanical and thermo-mechanical loads increase. Increasing the wear rate for substrate (316 stainless steel) by 41.82 %. For the steel coated with [Al 2 O 3 /Si 3 N 4 ]n; n= 30 bilayer. An increase of the wear rate by 37.12 % was obtained. In this research the wear and wear mechanism are detailed by means of techniques such as SEM, EDX and profilometry. This allowed to identify that by increasing the bilayers number in the heterostructure, a better coating is obtained to be implemented as a protective coating.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Influence of the number of bilayers on the mechanical and tribological properties in [TiN/TiCrN]n multilayer coatings deposited by magnetron sputtering10.24874/ti.2019.41.03.03 ↗
2. Analysis of the tribological evolution of nitride-based coatings
3. Performance evaluation of HSS cutting tool coated with hafnium and vanadium nitride multilayers, by temperature measurement and surface inspection, on machining AISI 1020 steel10.1016/j.surfcoat.2017.08.074 ↗
4. Coating thickness effects on diamond coated cutting tools10.1016/j.surfcoat.2009.06.011 ↗
5. Structure and properties of the Si3N4 nitride ceramics with hard wear resistant coatings10.1016/j.jmatprotec.2004.09.060 ↗
6. Electrochemical behavior of superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive DC unbalanced magnetron sputtering10.1016/j.surfcoat.2013.03.001 ↗
7. Anticorrosive yet conductive Hf/Si3N4 multilayer coatings on AZ91D magnesium alloy by magnetron sputtering10.1016/j.surfcoat.2016.11.042 ↗
8. High-performance coatings for cutting tools10.1016/j.cirpj.2016.11.004 ↗
9. Analysis of the structural integrity of (Si3N4 and Al2O3) individuals coatings and the [Si3N4/Al2O3]n heterostructure exposed to corrosive environments10.1016/j.matchemphys.2022.127062 ↗
10. Preparation of Al2O3-Si3N4 porous ceramics with a cactus-like architecture for potential filters applications10.1016/j.ceramint.2018.12.046 ↗
11. Al2O3/Si3N4 nanocomposite coating on aluminum alloy by the anodizing route: fabrication, characterization, mechanical properties and electrochemical behavior10.1016/j.ceramint.2016.04.142 ↗
12. Mechanical analysis of the incorporation of vanadium atoms into the TiCN system for the conformation of the TiVCN system10.1016/j.ceramint.2023.12.205 ↗
13. Friction coefficient evolution of Si3N4 binary coating with a stoichiometric ratio of 57/4310.1007/s11249-024-01909-6 ↗
14. Influence of the number of bilayers on the mechanical and tribological properties in [TiN/TiCrN]n multilayer coatings deposited by magnetron sputtering10.24874/ti.2019.41.03.03 ↗
15. Bao · 2004 · vol. 52 · 5397
16. Influence of indentation size and spacing on statistical phase analysis via high-speed nanoindentation mapping of metal alloys10.1557/s43578-021-00214-5 ↗
17. Nanoindentation analysis as a two-dimensional tool for mapping the mechanical properties of complex surfaces10.1557/jmr.2009.0149 ↗
18. Al · 2020
19. The effect of counterpart material on the sliding wear of TiAlN coatings deposited by reactive cathodic pulverization10.18226/23185279.v3iss2p59 ↗
20. Tribology in Industry Comparative Study of Tribological and Mechanical Properties Between Single Layers of Al 2 O 3 and Si 3 N 4 Deposited on AISI 316 Stainless Steel
21. Al2O3/Si3N4 nanocomposite coating on aluminum alloy by the anodizing route: fabrication, characterization, mechanical properties and electrochemical behavior10.1016/j.ceramint.2016.04.142 ↗
22. Analysis of the structural integrity of (Si3N4 and Al2O3) individuals coatings and the [Si3N4/Al2O3]n heterostructure exposed to corrosive environments10.1016/j.matchemphys.2022.127062 ↗
23. Corrosion properties of heterostructured [8YSZ/Al2O3]N coatings as a function of the bilayer number10.1007/s11665-021-06300-3 ↗
24. Microstructural evolution and thermal stability of AlCr(Si)N hard coatings revealed by in-situ high-temperature high-energy grazing incidence transmission X-ray diffraction10.1016/j.actamat.2020.01.026 ↗
25. In-Situ investigation of the oxidation behaviour of chemical vapour deposited Zr(C,N) hard coatings using synchrotron X-ray diffraction10.3390/coatings11030264 ↗
26. Deformation of hard coatings at elevated temperatures10.1016/j.surfcoat.2014.06.048 ↗
27. The high temperature tribological behavior of an iron oxide strengthened iron compound obtained from an industrial byproduct
28. Bilayer period effect on corrosion–erosion resistance for [TiN/AlTiN]n multilayered growth on AISI 1045 steel10.1016/j.jpcs.2010.08.019 ↗
29. On the thinnest Al2O3 interlayers in al‐based nanolaminates to enhance strength, and the role of constraint10.1016/j.actamat.2022.118345 ↗
30. Morphological evolution of porous silicon nitride ceramics at initial stage when exposed to water vapor10.1016/j.jallcom.2017.07.249 ↗
31. Growth of crystalline Al2O3 via thermal atomic layer deposition: nanomaterial phase stabilization10.1063/1.4868300 ↗
32. Mechanical properties of Si3N4–Al2O3 FGM joints with 15 layers for high-temperature applications10.1016/j.jeurceramsoc.2010.01.012 ↗
33. Modelling of microstructural evolution in multi-layered overlay coatings10.1007/s10853-017-1365-2 ↗
34. Mechanisms and dynamics of layered structure formation during Co-Deposition of binary compound thin films10.3390/coatings10010021 ↗
35. Effects of film thickness and deposition rate on the diffusion barrier performance of titanium nitride in Cu-through silicon vias10.1007/s13391-013-3108-0 ↗
36. The high temperature tribological behavior of an iron oxide strengthened iron compound obtained from an industrial byproduct
37. Development and evaluation of low friction TiSiCN nanocomposite coatings for piston ring applications10.1016/j.surfcoat.2016.04.061 ↗
38. Influence of the number of bilayers on the mechanical and tribological properties in [TiN/TiCrN]n multilayer coatings deposited by magnetron sputtering10.24874/ti.2019.41.03.03 ↗
39. The effect of bilayer periods and their thickness in magnetron sputtering protective multilayer coatings for tribological applications10.1007/s11665-021-05587-6 ↗
40. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
41. Structural and corrosion evaluation for multilayer system conformed by TiCN/TiVCN
42. Determination of multilayer effect evidence on metal carbon-nitride system10.1016/j.jallcom.2019.01.151 ↗
43. Applied Surface Science Hard yet tough CrN/Si 3 N 4 multilayer coatings deposited by the combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering
44. Structure evolution and properties of TiAlCN/VCN coatings deposited by reactive HIPIMS10.1016/j.surfcoat.2014.07.065 ↗
45. Development of a plasticity-oriented interatomic potential for CrFeMnNi high entropy alloys
46. Critical review of claims for ultra-hardness in nanocomposite coatings10.1080/14786435.2011.652688 ↗
47. Elastic modulus of TiHfCN thin films by instrumented indentation10.1016/j.tsf.2012.08.022 ↗
48. Deposition, microstructure and nanoindentation of multilayer Zr nitride and carbonitride nanostructured coatings10.1038/s41598-022-09449-6 ↗
49. A review on the wear, corrosion and high-temperature resistant properties of wire arc-sprayed Fe-Based coatings10.3390/nano11102527 ↗
50. Determination of high temperature mechanical properties of thermal barrier coatings by nanoindentation10.1179/1743294413Y.0000000227 ↗
51. The high temperature tribological behavior of an iron oxide strengthened iron compound obtained from an industrial byproduct
52. Effect of temperature on the structure and tribological properties of Ti, TiN and Ti/TiN coatings deposited by cathodic Arc PVD10.3390/coatings14070823 ↗
53. Thermal stability of Si/SiC/ta-C composite coatings and improvement of tribological properties through high-temperature annealing10.1038/s41598-022-07514-8 ↗
54. Tribological behaviour at high temperature of hard CrAlN coatings doped with y or Zr10.1016/j.tsf.2013.10.041 ↗
55. Improved adhesion and erosion wear performance of CrSiN/Cr multi-layer coatings on Ti alloy by inserting ductile Cr layers
56. Physical evolution of quaternary Ti1-xVxCN material
57. Comparative study of multilayer hard coatings deposited on WC-Co hardmetals
58. A review on titanium nitride and titanium carbide single and multilayer coatings deposited by plasma assisted chemical vapor deposition
59. Tribological behavior of Ni-Based WC-Co coatings deposited via spray and fuse technique varying the oxygen flow10.1155/2021/8898349 ↗
60. Tribological performance of CrAlSiN coatings at high temperatures10.1002/ppap.200932307 ↗
61. Tribological performance of Zr–O–N coating in marine environment fabricated by arc ion plating10.1007/s10853-024-09930-9 ↗
62. Mechanical, tribological, and electrochemical behavior of Cr1−xAlxN coatings deposited by r.f. reactive magnetron co-sputtering method10.1016/j.apsusc.2009.10.071 ↗
63. Tribological properties of CrCN/CrN multilayer coatings10.1016/j.triboint.2014.06.012 ↗
64. Influence of thermal degradation on the mechanical properties of coatings [8YSZ/Al2O3]n subjected to thermals cycles10.24874/ti.1062.02.21.06 ↗
65. Physical evolution of Quaternary Ti1-xVxCN material
66. Improving abrasive wear resistance of Si3N4 ceramics with self-matching through tungsten induced tribochemical wear
67. Boron addition in a non-equiatomic Fe50Mn30Co10Cr10 alloy manufactured by laser cladding: microstructure and wear abrasive resistance
68. The tribological characteristics of TiCN coating at elevated temperatures10.1016/j.wear.2004.12.031 ↗
69. The study of mechanical and tribology properties at room- and high-temperature in a (NiCoFe)86.5(AlTi)12(WMoV)1.5 high-entropy alloy10.1016/j.jallcom.2022.165082 ↗
70. Friction coefficient evolution of Si3N4 binary coating with a stoichiometric ratio of 57/4310.1007/s11249-024-01909-6 ↗
71. Nano-indentation properties of tungsten carbide-cobalt composites as a function of tungsten carbide crystal orientation10.3390/ma13092137 ↗
72. In-Situ nanoindentation surface topography of lead-free piezoelectric thin films10.3390/app142411849 ↗
73. Bibliometric analysis and visualization of nanoindentation research10.1021/acsomega.4c08430 ↗
74. The critical influence of surface topography on nanoindentation measurements of a-SiC: h films10.1016/j.surfcoat.2014.11.049 ↗
75. The adhesion strength and mechanical properties of SiC films deposited on SiAlON buffer layer by magnetron sputtering10.1016/j.surfcoat.2018.12.115 ↗
76. Structural and corrosion evaluation for multilayer system conformed by TiCN/TiVCN
77. Tribological behaviour of Si3N4–BN ceramic materials for dry sliding applications10.1016/S0043-1648(02)00219-3 ↗
78. The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating10.1016/j.triboint.2017.05.035 ↗
79. A comparative study on tribological behavior of Al2O3, AlN, Si3N4 and ZrO2 ceramics sliding against polycrystalline diamond ball
80. Nanoindentation of chemical-vapor deposited Al2O3 hard coatings at elevated temperatures10.1016/j.tsf.2015.01.069 ↗
81. Comparative study of tribological and mechanical properties between single layers of al2o3 and si3n4 deposited on aisi 316 stainless steel10.24874/ti.956.09.20.01 ↗
82. Frictional and wear behaviour of AlCrN, TiN, TiAlN single-layer coatings, and TiAlN/AlCrN, AlN/TiN nano-multilayer coatings in dry sliding10.1016/j.proeng.2013.12.214 ↗
83. The development of the PVD coating TiAlN as a commercial coating for cutting tools10.1016/0257-8972(91)90142-J ↗
84. Friction and wear properties of TiAlN coated tools with different levels of surface integrity10.1016/j.ceramint.2021.10.105 ↗
85. Bejarano · 2008 · vol. 44 · 36