Synthesis and electrochemical characteristics of metal nanoparticles decorated composite anode made of domestic alloy, used in lithium ion batteries
Source abstract
Abstract
In this work, appropriate material selection and process design enable the succesful production of high energy density electrode active material in the form of XAZ (where X, A and Z stand for electrochemically active, electrochemically inactive and carbon materials, respectively). Herein, the precipitates rich in iron and chromium are extracted selectively from a local ferrochromium alloy utilizing hydrometallurgy procedures. The precipitates are then exposed to separate calcination to get iron-rich and chromium-rich oxides seperately. In the end, a composite (XAZ) is fabricated under the mild synthesis conditions by combining these oxides with activated carbon and aluminum powder in a planetary ball mill. The composite's morphological, structural, and chemical properties are all optimized. The galvanostatic test results clearly demonstrate that the powder made of XAZ composite with embedded metal nanoparticles delivers 798 mAh g-1 after 100th cycle under a current load of 50 mA g-1 and high capacity (600 mAh g−1) over 300 cycles with an exceptional rate performance. It is anticipated that this research will create novel opportunities for producing high-value electrode active materials from accessible, low-cost raw ingredients.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A two-stage sorting method combining static and dynamic characteristics for retired lithium-ion battery echelon utilization10.1016/j.est.2023.107178 ↗
2. Anode materials for lithium-ion batteries: a review10.1016/j.apsadv.2022.100233 ↗
3. Low voltage anode materials for lithium-ion batteries10.1016/j.ensm.2017.01.009 ↗
4. A comprehensive review on metal-oxide nanocomposites for high-performance lithium-ion battery anodes10.1021/acs.energyfuels.1c00315 ↗
5. Low cost and efficient synthesis of magnetic iron oxide/activated sericite nanocomposites for rapid removal of methylene blue and crystal violet dyes10.1016/j.matchar.2020.110275 ↗
6. Multifunctional iron oxide nanoflake/graphene composites derived from mechanochemical synthesis for enhanced lithium storage and electrocatalysis10.1021/acsami.5b03477 ↗
7. Synthesis, characterization, applications, and challenges of iron oxide nanoparticles10.2147/NSA.S99986 ↗
8. Xu
9. Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries10.1039/c2nr11966h ↗
10. Multi-walled carbon nanotubes and chromium ferrites nanoparticles nanohybrids as anode materials for lithium-ion batteries10.1016/j.jallcom.2021.159654 ↗
11. Self-transforming stainless-steel into the next generation anode material for lithium ion batteries10.1016/j.jechem.2021.05.008 ↗
12. High rate capabilities Fe3O4-based Cu nano-architectured electrodes for lithium-ion battery applications10.1038/nmat1672 ↗
13. Facile replacement reaction enables nano-Ag-decorated three-dimensional Cu foam as high-rate lithium metal anode10.1021/acsami.2c10920 ↗
14. A nanoporous metal recuperated MnO2 anode for lithium ion batteries10.1039/C5NR05011A ↗
15. Highly dispersed copper nanoparticle modified nano Li4Ti 5O12 with high rate performance for lithium ion battery10.1016/j.electacta.2013.12.049 ↗
16. Enabling high performance lithium storage in aluminum: the double edged surface oxide10.1016/j.nanoen.2017.10.017 ↗
17. Aluminum: an underappreciated anode material for lithium-ion batteries10.1016/j.ensm.2019.10.027 ↗
18. Hybrid materials and nanoparticles for hybrid silicon solar cells and Li-ion batteries10.21926/jept.2102020 ↗
19. Synthesis of graphene quantum dots-coated hierarchical CuO microspheres composite for use as binder-free anode for lithium-ion batteries10.1016/j.compositesb.2021.109083 ↗
20. Low-cost carbon-coated Si-Cu3Si-Al2O3 nanocomposite anodes for high-performance lithium-ion batteries10.1016/j.jpowsour.2016.09.089 ↗
21. SnSb-TiC-C nanocomposite alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2015.01.055 ↗
22. FeSb2–Al2O3–C nanocomposite anodes for lithium-ion batteries10.1021/am500448f ↗
23. NiSb–Al2O3–C nanocomposite anodes with long cycle life for Li-ion batteries10.1021/jp409223c ↗
24. Cu 2Sb-Al 2O 3-C nanocomposite alloy anodes with exceptional cycle life for lithium ion batteries10.1039/c2jm13479a ↗
25. ALSER MADENCİLİK n.d. https://www.alsermaden.com/Chromium in Turkey and Globe -37-4 (accessed January 14, 2024).
26. Leaching of iron and chromium from an indigenous ferro chromium alloy via a rotary evaporator: optimum conditions determination and kinetic analysis10.1016/j.jmrt.2020.09.133 ↗
27. Porous, columnar shaped iron rich oxide synthesis for lithium-ion batteries from metallurgical grade, domestic, high carbon ferro-chromium alloys10.1016/j.jallcom.2022.166215 ↗
28. Preparing high performance of LiFe(1-x)MxPO 4 by using Fe(1-x)MxC2O4 as raw material precipitated from ferrochrome alloy leaching solution10.1016/j.physb.2014.04.040 ↗
29. Fabrication of iron-alumina nanocomposite powder by high energy ball milling of hematite-aluminum powder mixture10.1142/S0217979208048152 ↗
30. Rao · 1974 · vol. 9
31. Ferrous oxalate, maghemite and hematite nanorods as efficient adsorbents for decontamination of Congo red dye from aqueous system10.1007/s13762-014-0535-x ↗
32. Micro-sized FeS2@FeSO4 core-shell composite for advanced lithium storage10.1016/j.jallcom.2019.151922 ↗
33. Thermal and spectroscopic studies of chromium chromate hexahydrate - a likely composition for redox surfaces of calcined chromia catalysts10.1016/S0040-6031(98)00658-3 ↗
34. Kinetic and thermodynamic parameters of the decomposition of chromium chromate in different gas atmospheres10.1023/A:1011536920701 ↗
35. Improve the electrochemical performances of Cr2O3 anode for lithium ion batteries10.1016/j.ssi.2006.03.043 ↗
36. Synthesis and characterization of Cr8O21 as cathode material for rechargeable lithium batteries10.1016/j.ssi.2006.05.017 ↗
37. Graphene-based lithium-ion battery anode materials manufactured by mechanochemical ball milling process: a review and perspective10.1016/j.compositesb.2022.110232 ↗
38. A novel hollow Co3O4@N-doped carbon nanobubble film composite for high-performance anode of lithium-ion batteries10.1016/j.compositesb.2021.109247 ↗
39. Biosynthesized Co-doped TiO2 nanoparticles based anode for lithium-ion battery application and investigating the influence of dopant concentrations on its performance10.1016/j.compositesb.2018.12.001 ↗
40. Sonochemical self-growth of functionalized titanium carbide nanorods on Ti3C2 nanosheets for high capacity anode for lithium-ion batteries10.1016/j.compositesb.2019.107583 ↗
41. Detailed numerical modeling and simulation of Fe2O3−Al thermite reaction. Propellants10.1002/prep.202000290 ↗
42. Filling ratio of vial: an important parameter for ball milling10.1007/s10973-016-5635-z ↗
43. Kim · High‐Performance MxSb Al2O3 C M Fe Ni and Cu Nanocomposite‐Alloy Anodes for Sodium‐Ion · 2013 · 319
44. Hydrogenation/dehydrogenation in MgH2-activated carbon composites prepared by ball milling10.1016/j.ijhydene.2012.01.015 ↗
45. Analysis of the transition state of the carbon and iron oxide mixture activated by mechanical milling10.2355/isijinternational.44.1981 ↗
46. Reduced graphene oxide-metal/metal oxide composites: facile synthesis and application in water purification10.1016/j.jhazmat.2010.11.100 ↗
47. Fe2O3/carbon derived from peanut shell hybrid as an advanced anode for high performance lithium ion batteries10.1016/j.est.2023.107731 ↗
48. Applications of voltammetry in lithium ion battery research10.33961/jecst.2019.00619 ↗
49. Fast formation cycling for lithium ion batteries10.1016/j.jpowsour.2017.01.011 ↗
50. Synthesis of porous Co 3 O 4/C nanoparticles as anode for Li-ion battery application10.1016/j.apsusc.2018.02.230 ↗
51. Encapsulating homogenous ultra-fine SnO2/TiO2 particles into carbon nanofibers through electrospinning as high-performance anodes for lithium-ion batteries10.1016/j.ceramint.2021.03.329 ↗