Graphite-like poly benzene networks (g-C6H3): Wurtz synthesis, structural characterization and electrochemical performance
Source abstract
Abstract
Abstract Graphite-like poly benzene networks with benzene rings as building units (BUs) are prepared by the Wurtz reaction of 1,3,5-Trichlorobenzene with sodium at 380 °C in stainless steel autoclaves for the first time. The structural characteristics and electrochemical performances as anode materials in Lithium ion batteries of the as-prepared samples are then studied. Among them, structural characteristics test results unveil that the as-prepared samples possess graphite-like feature even though with poor crystallinity. In lithium ion storage performance tests, the sample PB-380 shows relatively higher reversible capacities of 573.7 mA h g−1 than that of sample PB-280, PB-480 and even graphite owing to the unique porous structure with benzene rings as building units. In addition, the influence of heat treatment temperature on structural characteristics, morphology and electrochemical performances of the key sample PB-380 are also studied. And it turns out that the structural rearrangement occurs in accompany with the removal of C, H atoms as heat treatment temperature increases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. MOF-derived bi-metal embedded N-doped carbon polyhedral nanocages with enhanced lithium storage10.1039/C6TA09030C ↗
2. Advances in electrode materials for Li-based rechargeable batteries10.1039/C7RA04370H ↗
3. Carbon-Based materials for lithium-ion batteries, electrochemical Capacitors, and their Hybrid Devices10.1002/cssc.201403490 ↗
4. Biomass porous carbon derived from jute fiber as anode materials for lithium-ion batteries10.1016/j.diamond.2019.107514 ↗
5. Carbon composite spun fibers with in situ formed multicomponent nanoparticles for a lithium-ion battery anode with enhanced performance10.1039/C6TA02083F ↗
6. Facile synthesis 2D hierarchical structure of ultrahigh nitrogen-doped porous carbon graphene nanosheets as high-efficiency lithium-ion battery anodes10.1016/j.matchemphys.2020.123043 ↗
7. Graphdiyne for high capacity and long-life lithium storage10.1016/j.nanoen.2014.11.036 ↗
8. Microwave-irradiation-Assisted combustion toward modified graphite as lithium ion battery anode10.1021/acsami.7b16418 ↗
9. Bio-mass derived ultrahigh-energy storage porous graphitic carbon for advanced anode material in lithium battery10.1016/j.matchemphys.2019.122543 ↗
10. A new carbonaceous material with large capacity and nigh efficiency for rechargeable Li-ion batteries10.1149/1.1393559 ↗
11. Biphenylene and Phagraphene as lithium ion battery anode materials10.1021/acsami.7b04170 ↗
12. Lithium storage on carbon nitride, graphenylene and inorganic graphenylene10.1039/C5CP07356A ↗
13. Highly microporous graphite-like BCxO3−x/C nanospheres for anode materials of lithium-ion batteries10.1039/C6TA10778H ↗
14. N-doped catalytic graphitized hard carbon for high-performance lithium/sodium-ion batteries
15. Metal-dispersed porous graphene for hydrogen storage10.1063/1.3560468 ↗
16. Multifunctional porous graphene for nanoelectronics and hydrogen storage: new properties revealed by first Principle calculations10.1021/ja100156d ↗
17. Two-dimensional polyphenylene: experimentally available porous graphene as a hydrogen purification membrane10.1039/b926313f ↗
18. A promising monolayer membrane for oxygen separation from harmful gases: nitrogen-substituted polyphenylene10.1039/C4NR02315C ↗
19. Porous graphenes: two-dimensional polymer synthesis with atomic precision10.1039/b915190g ↗
20. Tribromobenzene on Cu(111): temperature-dependent formation of halogen-bonded, organometallic, and covalent nanostructures10.1063/1.4906214 ↗
21. Two-dimensional polymer formation on surfaces: Insight into the roles of Precursor mobility and reactivity10.1021/ja107947z ↗
22. Lithium insertion in high capacity carbonaceous materials10.1149/1.2050057 ↗
23. Large hysteresis during lithium insertion into and extraction from high-capacity disordered carbons10.1149/1.1838288 ↗
24. Structural characterization and electrochemical performance of macroporous graphite-like C3N3 prepared by the Wurtz reaction and heat treatment10.1039/C7RA07707F ↗
25. Chemical synthesis of cross-linked polyaniline by a novel solvothermal metathesis reaction of p-dichlorobenzene with sodium amide10.1016/j.polymer.2005.01.092 ↗
26. Structural and electrochemical properties of disordered carbon prepared by the pyrolysis of poly(p-phenylene) below 1000 °C for the anode of a lithium-ion battery10.1016/S0008-6223(99)00002-0 ↗
27. Biomass carbon derived from sisal fiber as anode material for lithium-ion batteries10.1016/j.matlet.2014.11.160 ↗
28. A superior low-cost amorphous carbon anode made from pitch and lignin for sodium-ion batteries10.1039/C5TA08601A ↗
29. Mechanism of lithium insertion in hard carbons prepared by pyrolysis of epoxy resins10.1016/0008-6223(96)00177-7 ↗
30. Correlation between lithium intercalation capacity and microstructure in hard carbons10.1149/1.1837241 ↗
31. Poly(p-Phenylene) thin films prepared by vacuum deposition and their photoluminescent characteristics10.1002/marc.1994.030150610 ↗
32. Study on the morphologies of covalent organic microporous Polymers: the role of reaction solvents10.1002/macp.201200084 ↗
33. N-doped carbon layer coated thermally exfoliated graphene and its capacitive behavior in redox active electrolyte10.1016/j.carbon.2014.12.069 ↗
34. High-pressure reactivity of triptycene probed by Raman spectroscopy10.1021/acs.jpcb.6b05120 ↗
35. Pavia · 2015
36. One-pot fabrication of hollow cross-linked fluorescent carbon nitride nanoparticles and their application in the detection of mercuric ions10.1016/j.talanta.2015.05.063 ↗
37. Novel carbon nitride composites with improved visible light absorption synthesized in ZnCl2-based salt melts10.1039/C4RA08236B ↗
38. Simons · 1978
39. Lithium storage performance of carbon nanotubes with different nitrogen contents as anodes in lithium ions batteries10.1016/j.electacta.2013.04.145 ↗
40. An amorphous carbon nitride composite derived from ZIF-8 as anode material for sodium-ion batteries10.1002/cssc.201500192 ↗
41. Covalent-organic-frameworks derived N-doped porous carbon materials as anode for superior long-life cycling lithium and sodium ion batteries10.1016/j.carbon.2017.02.057 ↗
42. Construction of a unique two-dimensional hierarchical carbon architecture for superior lithium-ion storage10.1021/acsami.6b12570 ↗
43. Synthesis of carbon nitrides with graphite-like or onion-like lamellar structures via a solvent-free route at low temperatures10.1016/j.carbon.2005.01.005 ↗
44. Wagner · 2003
45. Carbon aerogel with 3-D continuous skeleton and mesopore structure for lithium-ion batteries application10.1016/j.matchemphys.2014.11.023 ↗
46. Polystyrene-derived carbon with hierarchical macro-meso-microporous structure for high-rate lithium-ion batteries application10.1007/s10853-015-9214-7 ↗
47. Porous carbon sphere anodes for enhanced lithium-ion storage10.1039/C5TA01360G ↗
48. Microwave-assisted preparation of hollow porous carbon spheres and as anode of lithium-ion batteries10.1016/j.micromeso.2017.05.062 ↗
49. Electronic properties and hydrogen storage application of designed porous nanotubes from a polyphenylene network10.1016/j.ijhydene.2014.09.112 ↗