journal article·2021-10

Pd/Cu(220) interdiffusion under compressive stress

Cheng-Yi Liu, Chung-Yu Chiu, Erh-Ju Lin, Pai-Jung Chang, Yue-Kai Tang, Kun-Hui Yang

Publisher page

Abstract

Abstract This work investigates the effect of the external compressive pressure on the interdiffsuion between Pd and Cu. By analyzing ESCA atomic depth profiling without/with the external compressive pressure, two important findings were observed: (1) Pd/Cu(220) interdiffusion was found to be promoted by the external compressive pressure. (2) Under external compressive pressure, Pd atoms diffuse across the interdiffusion interface into the Cu(220) side more than the Cu atoms across the interdiffusion interface into the Pd side. Combining Matano approach and the obtained ESCA atomic profiles, the interdiffusion diffusivities and the activation enthalpy (H) of Pd/Cu(220) interdiffusion can be calculated. The activation enthalpy (0.694 eV) of Pd/Cu(220) interdiffusion is reduced to 0.625 eV and 0.604 eV with applying external pressures of 125 MPa and 250 MPa, respectively. The present calculation of the activation enthalpy implies that the applying compressive stress results in negative changes of the activation enthalpy (δH) and the free energy of activation (δG) for the Pd/Cu(220) interdiffusion. With Gibbs equation, the negative changes of δG and δH can further deduce the relation of the entropy change (δS) and the activation of enthalpy (δH) for the Pd/Cu(220) interdiffusion system under the external compressive stress, which are (1) the change of the entropy has to be positive (δS > 0) or (2) the change of the entropy (δS) has to be smaller than the term of δH/T., i.e., δS
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Aluminum Alloys Composites Properties · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Vacancy-formation energies for fcc and bcc transition metals10.1103/PhysRevB.51.9526 ↗
2. Vacancy-formation energies at the (111) surface and in bulk Al, Cu, Ag, and Rh10.1103/PhysRevB.48.1877 ↗
3. Hydrogen-induced enhancement of interdiffusion in Cu-Ni diffusion couples10.1103/PhysRevLett.80.5588 ↗
4. Analysis of Cu–Ni diffusion in a spherical geometry for excess vacancy production10.1016/S1359-6454(02)00273-2 ↗
5. Determination of intrinsic diffusion coefficients in a wide concentration range of a Cu–Ni couple by the multiple markers method10.2320/matertrans1960.23.19 ↗
6. Thermodynamics of diffusion under pressure and stress: relation to point defect mechanisms10.1063/1.119066 ↗
7. Pressure‐enhanced interdiffusion in amorphous Si/Ge multilayers10.1063/1.115934 ↗
8. Effect of high pressure on interdiffusion in an Al-Mg alloy10.1007/BF00547584 ↗
9. Cu-Pd (copper-palladium)10.1007/BF02645723 ↗
10. Stacked chip-to-chip interconnections using wafer bonding technology with dielectric bonding glues
11. Three-dimensional integration technology based on wafer bonding with vertical buried interconnections10.1109/TED.2006.884079 ↗
12. Wafer-to-wafer bonding for microstructure formation10.1109/5.704262 ↗
13. Fabrication of thin-GaN LED structures by Au–Si wafer bonding10.1149/1.2181293 ↗
14. Size-dependent inelastic behavior of particle-reinforced metal–matrix composites10.1016/S0266-3538(00)00235-9 ↗
15. 2011
16. Overview and outlook of through-silicon via (TSV) and 3D integrations10.1108/13565361111127304 ↗
17. Ag∕ Au diffusion wafer bonding for thin-GaN led fabrication10.1149/1.2777875 ↗
18. Wafer-level Cu–Cu bonding technology10.1016/j.microrel.2011.04.016 ↗
19. Effect of reaction time and P content on mechanical strength of the interface formed between eutectic Sn–Ag solder and Au/electroless Ni (P)/Cu bond pad10.1063/1.1602563 ↗
20. Mean-time-to-failure study of flip chip solder joints on Cu/Ni (V)/Al thin-film under-bump-metallization10.1063/1.1616993 ↗
21. Electromigration failure in flip chip solder joints due to rapid dissolution of copper10.1557/JMR.2003.0355 ↗
22. Effect of Cu solubility on electromigration in Sn (Cu) micro joint10.1063/1.5000369 ↗
23. Room temperature Cu–Cu direct bonding using surface activated bonding method10.1116/1.1537716 ↗
24. Direct bonding for wafer level 3D integration
25. Au–Au surface-activated bonding and its application to optical microsensors with 3-D structure10.1109/JSTQE.2009.2020812 ↗
26. Full characterization of Cu/Cu direct bonding for 3D integration
27. Recent Developments of Cu-Cu non-thermo compression bonding for wafer-to-wafer 3D stacking
28. Critical temperatures in thermocompression gold stud bonding10.1063/1.2783974 ↗
29. Lee · 1997
30. Mechanisms of interdiffusion in Pd–Cu thin film diffusion couples10.1016/j.tsf.2009.08.026 ↗
31. Interdiffusion and stress development in Cu–Pd thin film diffusion couples10.1016/j.tsf.2008.05.011 ↗
32. Huang · 2013
33. Mechanisms of interdiffusion in Pd–Cu thin film diffusion couples10.1016/j.tsf.2009.08.026 ↗
34. Interdiffusion and stress development in Ni-Cu thin film diffusion couples10.1524/zksu.2009.0036 ↗
35. Intrinsic diffusion coefficients and the vacancy flow factor in Dilute Cu-Zn Alloys10.1007/BF02645494 ↗