Bioactivity of microwave and conventionally synthesized 70sr–HA.xZn(30-x)si composites
Source abstract
Abstract
Abstract The composites of different compositions of 70Sr–HA.xZn (30-x)Si were prepared by two different methods: conventional sintering and microwave sintering. XRD characterized the prepared samples for phase identification, FTIR and Raman for functional groups, SEM for microstructure, hardness for mechanical properties. X-ray diffraction studies showed that multiple phases were present in all the samples. The values of density and hardness of apatite composite samples sintered by microwave processing were higher than the apatite composite samples sintered by the conventional method. Microwave sintered products showed more uniform and higher grain growth in comparison to conventionally sintered products. In vitro bioactivity of the synthesized composites was assessed by the SBF immersion method. It was observed that the bioactivity of the microwave processed apatite was better than the conventionally processed apatite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Probable phase composition of the mineral in bone, Zeitschrift Fur Naturforschung C-A
2. The properties of sintered calcium phosphate with [Ca]/[P] = 1.5010.3390/ijms131013569 ↗
3. Characterization of plasma-sprayed hydroxyapatite/ZrO2 graded coating10.1016/j.matdes.2009.02.002 ↗
4. Rapid sintering of hydroxyapatite ceramics by microwave processing, Ceramic Transactions, 21
5. Review article abstract only Ionic substitutions in calcium phosphates synthesized at low temperature10.1016/j.actbio.2009.12.041 ↗
6. Fabrication and mechanical evaluation of hydroxyapatite/oxide nano-composite materials10.1016/j.msec.2013.05.059 ↗
7. Calcium orthophosphates10.1007/s10853-006-1467-8 ↗
8. Fabrication properties and applications of dense hydroxyapatite: a review10.3390/jfb6041099 ↗
9. Microwave processed nanocrystalline hydroxyapatite: simultaneous enhancement of mechanical, biological properties10.1016/j.actbio.2010.03.016 ↗
10. F-substituted hydroxyapatite nanopowders: thermal stability, sintering behavior, and mechanical properties10.1016/j.ceramint.2009.09.007 ↗
11. Characterization, physicochemical properties, and biocompatibility of La incorporated apatites10.1016/j.actbio.2009.05.026 ↗
12. Unravelling the specific site preference in doping of calcium hydroxyapatite with strontium from ab initio investigations and Rietveld analysis10.1039/c2cp23163h ↗
13. Synthesis of barium ferrite nanoparticles using rhizome extract of Acorus Calamus: characterization and its efficacy against different plant phytopathogenic fungi10.1016/j.nanoso.2020.100599 ↗
14. FeCo-Fe2CoO4/Co3O4 nanocomposites: phase transformations as a result of thermal annealing and practical application in catalysis10.1016/j.ceramint.2020.01.019 ↗
15. Immobilization of boron-rich compound on Fe3O4 nanoparticles: stability and cytotoxicity10.1016/j.jallcom.2019.05.075 ↗
16. Correlation between microstructure parameters and anti-cancer activity of the [Mn0.5Zn0.5](EuxNdxFe2-2x)O4 nano ferrites produced by modified sol-gel and ultrasonic methods10.1016/j.ceramint.2019.11.230 ↗
17. Synthesis and characterization of strontium-doped hydroxyapatite for biomedical applications10.1007/s10973-016-5607-3 ↗
18. Mechanical parameters of strontium doped hydroxyapatite sintered using the microwave and conventional methods10.1016/j.jmbbm.2011.07.005 ↗
19. Optimized Zn-doped hydroxyapatite/doxorubicin bioceramics system for efficient drug delivery and tissue engineering application10.1016/j.ceramint.2017.12.235 ↗
20. Structural and biological assessment of zinc-doped hydroxyapatite nanoparticles
21. Biocompatibility study of hydroxyapatite alumina and silicon carbide composite scaffold for bone tissue engineering
22. Synthesis of silicon-substituted hydroxyapatite by a hydrothermal method with two different phosphorous sources10.1016/j.ceramint.2010.11.044 ↗
23. Investigation of AC-measurements of epoxy/ferrite composites
24. Effect of Ga content on magnetic properties of BaFe12-xGaxO19/epoxy composites10.1007/s10853-020-04661-z ↗
25. Magnetic phase diagrams of the manganites Ln1-xBaxMnO3 (Ln = Nd, Sm)10.1088/0953-8984/11/44/309 ↗
26. Investigation of phase transformations and corrosion resistance in Co/CoCo2O4 nanowires and their potential use as a basis for lithium-ion batteries10.1038/s41598-019-53368-y ↗
27. Effect of microwave and conventional processing techniques on mechanical properties of Strontium substituted hydroxyapatite10.1016/j.ceramint.2019.09.076 ↗
28. Fabrication of transparent hydroxyapatite ceramics by microwave processing10.1016/0167-577X(95)00016-X ↗
29. Fabrication of hydroxyapatite ceramics by microwave processing, mat. Res. Soc. Symp
30. Microwave energy applied to processing of high-temperature materials
31. Comparison between microwave and conventional sintering of WC/Co composites
32. Microwave and conventional processing of niobium and manganese doped lanthanum germanate based apatites
33. Microwave sintering of hydroxyapatite ceramics10.1557/JMR.1994.0180 ↗
34. Influence of microwave processing and sintering temperature on the structure and properties of Sr/Zr doped hydroxyapatite10.1016/j.matchemphys.2018.09.086 ↗
35. How useful is SBF in predicting in vivo bone bioactivity10.1016/j.biomaterials.2006.01.017 ↗
36. Preparation and characterization of Na+, SiO44−, and CO32−Co-substituted hydroxyapatite10.1111/j.1551-2916.2010.04282.x ↗
37. Critical behavior of La0.825Sr0.175MnO2.912 anion-deficient manganite in the magnetic phase transition region10.1134/S0021364007100086 ↗
38. The effect of lithium doping on the ferroelectric properties of LST ceramics10.1016/j.ceramint.2020.02.254 ↗
39. Prospects of microwave processing: an overview10.1007/s12034-009-0001-4 ↗
40. The Infrared study of the effect of P2O5 in the structure of lead silicate glasses
41. Photoacoustic Fourier transform infrared spectroscopy of nanoporousSiOx/Si thin films with varying porosities10.1063/1.2138376 ↗
42. Effect of barium doping on the physical properties of zinc oxide nanoparticles elaborated via sonochemical synthesis method
43. Automation of the peak fitting method in bone FTIR microspectroscopy spectrum analysis: human and mice bone study10.1155/2018/4131029 ↗
44. Aneta Zim, et al. Synthesis, structural properties and thermal stability of Mn-doped hydroxyapatite10.1016/j.molstruc.2010.04.001 ↗
45. Raman spectroscopy measurements of hydroxyapatite obtained by mechanical alloying10.1016/j.jpcs.2003.10.071 ↗
46. Differentiation between hydroxyapatite and/I-tricalcium phosphate by means of p-Raman spectroscopy10.1016/S0955-2219(98)00057-0 ↗
47. Peculiarities of the neck growth process during an initial stage of spark-plasma, microwave and conventional sintering of WC spheres10.1016/j.jallcom.2012.01.146 ↗
48. The Applications of microwave heating to chemical syntheses
49. Comparative study on conventional sintering with microwave sintering and vacuum sintering of Y2O3-Al2O3-ZrO2 ceramics
50. Microwave sintering: fundaments and modeling10.1111/jace.12278 ↗
51. Microstructure and mechanical properties of MicrowaveSintered ZrO2Bioceramics with TiO2 addition10.1155/2016/2458685 ↗
52. Effect of titania addition on yttria-stabilized tetragonal zirconia ceramics sintered at high temperatures10.1016/j.ceramint.2003.10.025 ↗
53. Porosity-dependence of elastic moduli and hardness of 3Y-TZP ceramics10.1016/S0272-8842(98)00037-6 ↗
54. Self-doped lanthanum manganites as a phase-separated system: transformation of magnetic, resonance, and transport properties with doping and hydrostatic compression10.1063/1.3007993 ↗
55. Study of phase transformations in Co/CoCo2O4 nanowires10.1016/j.jallcom.2019.152450 ↗
56. Behavior of hydroxyapatite crystals in a simulated body fluid: effects of crystal face10.2109/jcersj2.121.807 ↗
57. Effects of sintering temperature on surface morphology/microstructure, in vitro degradability, mineralization and osteoblast response to magnesium phosphate as a biomedical material
58. Ultrastructural comparison of dissolution and apatite precipitation on V and silicon-substituted hydroxyapatite in vitro and in vivo10.1002/jbm.a.30035 ↗
59. In vitro dissolution of calcium phosphate-mullite composite in simulated body fluid10.1007/s10856-010-4053-1 ↗
60. Impact of transition metal ions on the structure and bioactivity of alkali-free bioactive glasses10.1016/j.jnoncrysol.2018.12.003 ↗
61. Gene-expression profiling of human osteoblasts following treatment with the ionic products of Bioglass(R) 45S5 dissolution10.1002/1097-4636(200105)55:2<151::AID-JBM1001>3.0.CO;2-D ↗