journal article·2021-02

Tensile properties of tungsten/glass composites at elevated temperatures

Chong Gao, Yingchun Wang, Xingwang Cheng, Xueya Ma, ShuKui Li, Hongnian Cai

Publisher page

Abstract

Abstract The quasi-static tensile behavior of tungsten/glass composites containing 40–50 vol% tungsten at elevated temperatures in the range of 550–750 °C was investigated. Results show that the composites present absolute brittleness at temperatures up to 650 °C while exhibit brittle-to-ductile transition in the temperature range of 650–700 °C and super-plasticity at 750 °C due to the decreasing viscosity of glass matrix. The strength of the composites declines with the increase of tungsten content at temperatures lower than 650 °C and increases with increasing the volume fraction of tungsten at 750 °C. In the temperatures between 650 and 700 °C, 55BH/45W exhibits the highest strength while 60BH/40W presents the lowest one. The elongations of the composites reduce with increasing tungsten content at 750 °C because of the amount of W/W and W/G interfaces increasing. In addition, the effects of temperature and tungsten content on the deformation and fracture mechanism of the composite were analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Relation between apparent glass transition temperature and liquids temperature for inorganic glasses10.1016/0022-3093(71)90053-6 ↗
2. Baker · 2011 · 340
3. Internal shearing during shaped charge jet formation and break-up10.1002/prep.19920170108 ↗
4. Characterization and comparison of microstructures in the shaped-charge regime: copper and tantalum10.1016/1044-5803(93)90022-N ↗
5. Dynamic recrystallization of tungsten in a shaped charge liner10.1016/j.scriptamat.2008.10.028 ↗
6. Mechanical behaviour of borosilicate glass-copper composites10.1016/S1359-835X(97)00052-3 ↗
7. Fracture of a brittle particulate composite10.1007/BF00549316 ↗
8. Strength and fracture toughness of indented glass-nickel compacts10.1007/BF00550587 ↗
9. Glass-ceramic-metal composites for making graded seals in prosthetic devices10.1007/BF00692974 ↗
10. Investigation of the mechanical properties of Mo-reinforced glass-matrix composites10.1016/j.jnoncrysol.2004.07.030 ↗
11. Mechanical performance and fracture behaviour of glass-matrix composites reinforced with molybdenum particles10.1016/j.compscitech.2004.12.035 ↗
12. Preparation, microstructure and mechanical properties of metal-particulate/glass-matrix composites10.1016/S0266-3538(96)00102-9 ↗
13. Inclusion-size-independent strength of glass/particulate-metal composites10.1111/j.1151-2916.1988.tb05080.x ↗
14. Thermophysical properties of Alumina particle reinforced glass matrix composites10.1111/j.1744-7402.2012.02806.x ↗
15. Toughening effects quantification in glass matrix composite reinforced by alumina platelets10.1016/j.actamat.2008.02.024 ↗
16. Mechanical properties of alumina fiber/glass matrix composites with and without a tin dioxide interface10.1016/S0921-5093(99)00115-X ↗
17. Development and properties of a SiC fibre-reinforced magnesium aluminosilicate glass-ceramic matrix composite10.1007/BF01154121 ↗
18. Effect of heat treatment in air on the thermal properties of SiC fibre-reinforced composite. Part 1: a barium osumilite (BMAS) matrix glass ceramic composite10.1007/s10853-006-1443-3 ↗
19. Mechanical behavior of silicon carbide fiber-reinforced strontium aluminosilicate glass-ceramic composites10.1016/S0921-5093(97)00082-8 ↗
20. Effect of hot pressing time and post heat treatment on the microstructure and mechanical properties of SiC fiber-reinforced glass-ceramic composites10.1007/BF00357328 ↗
21. Optically-transparent oxide fibre-reinforced glass matrix composites10.1016/j.jnoncrysol.2010.05.015 ↗
22. Sintering behavior and mechanical properties of mica-diopside glass–ceramic composites reinforced by nano and micro-sized zirconia particle10.1016/j.jnoncrysol.2012.08.002 ↗
23. Viscous phase sintering of particle-reinforced glass matrix composites10.1016/0955-2219(95)00114-X ↗
24. Effect of tungsten content on dynamic compressive properties of borosilicate glass/tungsten composites at elevated temperatures10.1016/j.msea.2018.12.082 ↗
25. Preparation and dynamic mechanical properties at elevated temperatures of a tungsten/glass composite10.1007/s11665-018-3230-0 ↗
26. An analytical study on strengthening of particulate reinforced metal matrix composites10.1016/1359-6454(95)00150-9 ↗
27. Investigation on the microstructure, room and high temperature mechanical behaviors and strengthening mechanisms of the (TiB+TiC)/TC4 composites10.1016/j.jallcom.2017.08.017 ↗
28. Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite10.1016/j.msea.2006.07.129 ↗