Role of phase transformation in possible wear mechanisms in silicon microelectromechanical-system devices
Source abstract
Abstract
Abstract Wear on microelectromechanical-system (MEMS)/nanoelectromechanical-system (NEMS) devices is an inevitable and critical issue. It reduces the lifespan of the device and increases the failure rate. In this study, an atomic force microscope (AFM) was used to investigate wear mechanisms and to devise precautions against wear. AFM made it possible to demonstrate the operational behaviors of MEMS/NEMS silicon-based devices. It was found that the dynamic tip–sample interaction process induces phase transformation of the silicon tip apart from the conventional wear mechanisms. This weakens the mechanical strength of the tip and promotes wear. Evidence of phase transformation in probe tips during scanning was found, and the possibility of the phase-transformation path was also investigated. In addition, the distribution of stress in AFM probe tips with applied force was simulated. Worn probe tips were analyzed based on the Kikuchi patterns, and then high pressure was applied on monocrystalline silicon to determine the possible phase-transformation path. The results provided useful insights into wear mechanisms in silicon-based MEMS devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Industry 4.010.1007/s12599-014-0334-4 ↗
2. A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems10.1016/j.mfglet.2014.12.001 ↗
3. Smart factories in Industry 4.0: a review of the concept and of energy management approached in production based on the Internet of Things paradigm
4. Introduction to nanotechnology10.1007/978-3-642-02525-9 ↗
5. Ultrathin wear-resistant ionic liquid films for novel MEMS/NEMS applications10.1002/adma.200702006 ↗
6. Ultrahigh density, high-data-rate NEMS-based AFM data storage system10.1016/S0167-9317(99)00006-4 ↗
7. Platinum-coated probes sliding at up to 100 mm s−1against coated silicon wafers for AFM probe-based recording technology10.1088/0957-4484/18/34/345504 ↗
8. Recent CD AFM probe developments for sub-45 nm technology nodes
9. Direct deformation study of AFM probe tips modified by hydrophobic alkylsilane self-assembled monolayers10.1016/j.ultramic.2011.03.020 ↗
10. Ion-beam-sputter deposited titanium nitride thin films for conductive atomic force microscope probes10.1016/j.tsf.2012.07.066 ↗
11. Surface modification of AFM Si3N4 probes for adhesion/friction reduction and imaging improvement10.1115/1.2345411 ↗
12. Uniaxial phase transition in Si: ab initio calculations10.1103/PhysRevB.67.134109 ↗
13. Pressure induced phase transitions in silicon, germanium and some III–V compounds10.1016/0022-3697(62)90085-9 ↗
14. Crystal data for high-pressure phases of silicon10.1103/PhysRevB.34.4679 ↗
15. Experimental study of the crystal stability and equation of state of Si to 248 GPa10.1103/PhysRevB.41.12021 ↗
16. Phase transformations of silicon caused by contact loading10.1063/1.364340 ↗
17. High-pressure phases of amorphous and crystalline silicon10.1103/PhysRevB.67.212101 ↗
18. Electrical resistance of metallic contacts on silicon and germanium during indentation10.1557/JMR.1992.0961 ↗
19. Effects of monolithic silicon postulated as an isotropic material on design of microstructures10.1016/S0924-4247(00)00436-2 ↗
20. Craig · 2011
21. Studying materials under extreme conditions-introduction of large volume high pressure apparatus
22. In situ x-ray diffraction study of silicon at pressures up to 15.5 GPa and temperatures up to 1073 K10.1103/PhysRevB.68.020102 ↗
23. Phase transitions investigation in ZnTe by thermoelectric power measurements at high pressure10.1016/j.ssc.2004.07.062 ↗