journal article·2017-10

Fabrication of Ta-Nb-Al 2 O 3 seal composites by laser radiation

Takuya Honma, Junichi Tatami

Publisher page

Abstract

Abstract Ceramic-metal (Al2O3-Nb) sealing was performed by melting an Al2O3 capillary using neodymium-doped yttrium aluminum garnet (Nd:YAG) laser irradiation. However, voids existed in the melting region. Since voids are the most important factor affecting the mechanical strength of seals, attempts were made to remove them by introducing annealing as an additional cooling step after the melting step during the sealing process with Nd:YAG laser irradiation. Simultaneously, a Ta mesh foil was used, wrapped around the surface of the Al2O3 capillary as a grain-growth inhibitor. In addition, another important factor affecting the mechanical strength of the sealing is control of the seal length. In this study, the influence of various Ta mesh foil form factors (hole area, space between holes, and Ta area) on the seal length in the melted A2O3 capillary for Al2O3-Nb seals was therefore investigated in order to elucidate the optimal factors to increase the seal length. It was found that both the Ta area and space between holes should be decreased to increase seal length. Moreover, as the ratio of the Ta area to the space between holes increased, the seal length increased as well.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Glass properties and applications · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Improved arc tubes for ceramic metal halide lamps
2. Ceramic metal halide lamps: a world of lighting
3. Influence of crystallization inside glass frit on seal stress in ceramic metal halide lamps10.1016/j.ceramint.2012.09.043 ↗
4. Characterizing metal-to-ceramic seals for high intensity discharge lamps
5. Bonding mechanism between alumina and niobium10.1007/BF00542374 ↗
6. Ceramic/metal joining for structure and materials
7. Alumina ceramic-to-metal seals by the “Mo process”10.2109/jcersj1950.81.931_108 ↗
8. Sapphire to metal seal by reactive alloying method10.2109/jcersj1950.78.902_350 ↗
9. CO2 laser welding of ceramics (report 1)10.2207/qjjws1943.51.182 ↗
10. Physics and chemistry of yttrium
11. Vapour pressure equations for the metallic elements: 298–2500K10.1179/cmq.1984.23.3.309 ↗
12. Using aluminum for space propulsion10.2514/1.5132 ↗
13. High-temperature vaporization behavior of oxides II10.1063/1.555799 ↗
14. Microstructure of seal formed between a Nb wire and an Al2O3 capillary melted by YAG laser radiation10.1016/j.ceramint.2012.11.079 ↗
15. Levin · 1964 · 37
16. All-optical switching in sagnac loop mirror containing an ytterbium-doped fiber and fiber bragg grating10.1364/AO.52.005701 ↗
17. Theoretical and experimental investigation of all-optical switching based on cascaded LPFGs separated by an erbium-doped fiber10.1063/1.3587358 ↗
18. Transparent ceramic lamp envelope materials10.1088/0022-3727/38/17/S07 ↗
19. Thermodynamic properties of the phases in the V-O and Nb-O system at high temperature