Failure behavior of small outline J Lead/Sn–X (X = AgCu or Pb) solder joints under thermomechanical fatigue test
Source abstract
Abstract
Abstract A failure analysis of thermomechanical fatigued small outline J (SOJ) lead/Sn–X (X = AgCu and Pb) solder joints over different printed circuit board surface finishes underwent pull test has been conducted. Experimental results showed that the dimple-fracture feature was due to the occurrence of fracture in the solder matrix and the intergranular-fracture feature was due to the occurrence of fracture in the IMC layer. The growth rate of the IMC layer at the SOJ/SnAgCu interfaces is much faster than that of the IMC layer at the SOJ/SnPb interfaces. The increase in the thickness of IMC (Cu6Sn5) and the fatigue of the SnPb solder matrix upon thermal cycling resulted in the decline of the strength of the SOJ/SnAgCu/(Ni/Au) and SOJ/SnPb/(Ni/Au) solder joints, respectively. After a pull test, the existence of different phases and the coverage variation of these phases on the fracture surface disclosed not only the distribution of stress but also the thermal fatigue properties of bulk solder alloy and IMC between the SOJ lead and solder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Lewis · J. Electron. Mater. · 2002 · 31 · 16110.1007/s11664-002-0163-y ↗
2. Kanchanomai · J. Electron. Mater. · 2002 · 31 · 45610.1007/s11664-002-0100-0 ↗
3. Ho · J. Electron. Mater. · 2002 · 31 · 58410.1007/s11664-002-0129-0 ↗
4. Zribi · J. Electron. Mater. · 2001 · 30 · 115710.1007/s11664-001-0144-6 ↗
5. Kariya · J. Electron. Mater. · 1999 · 28 · 126310.1007/s11664-999-0166-z ↗
6. Kariya · J. Electron. Mater. · 1998 · 27 · 122910.1007/s11664-998-0074-7 ↗
7. Kanchanomai · J. Electron. Mater. · 2002 · 31 · 14210.1007/s11664-002-0161-0 ↗
8. Lee · J. Electron. Mater. · 2002 · 31 · 94610.1007/s11664-002-0188-2 ↗
9. Choi · J. Electron. Mater. · 2002 · 31 · 29210.1007/s11664-002-0146-z ↗
10. Guo · J. Electron. Mater. · 2001 · 30 · 107310.1007/s11664-001-0132-x ↗
11. Ahat · J. Electron. Mater. · 2001 · 30 · 131710.1007/s11664-001-0118-8 ↗
12. Anderson · J. Electron. Mater. · 2001 · 30 · 105010.1007/s11664-001-0129-5 ↗
13. Lee · J. Electron. Mater. · 2001 · 30 · 111210.1007/s11664-001-0137-5 ↗
14. Plumbridge · J. Electron. Mater. · 2001 · 30 · 117810.1007/s11664-001-0147-3 ↗
15. Kariya · J. Electron. Mater. · 2001 · 30 · 118410.1007/s11664-001-0148-2 ↗
16. Choi · J. Electron. Mater. · 1999 · 28 · 125110.1007/s11664-999-0164-1 ↗
17. Zribi · IEEE Trans. Components Packaging Tech. · 2000 · 23 · 38310.1109/6144.846778 ↗
18. Lee · J. Electron. Mater. · 1999 · 28 · 5710.1007/s11664-999-0195-7 ↗
19. Dasgupta · Int. J. Damage Mech. · 2001 · 10 · 10110.1106/NM1B-1UQH-DJCT-4YH1 ↗
20. Y.H. Pao, S. Badgley, R. Govila, E. Jih, in: S.A. Schroeder, M.R. (Eds.), Mitchell Fatigue of Electronic Materials, ASTM, Philadelphia, PA, 1994, pp. 60–81.10.1520/STP23916S ↗
21. Pang · Mater. Sci. Eng. · 2001 · A307 · 4210.1016/S0921-5093(00)01958-4 ↗
22. Lee · Microelectron. Reliability · 2000 · 40 · 23110.1016/S0026-2714(99)00061-X ↗
23. Choi · J. Electron. Mater. · 2000 · 29 · 124910.1007/s11664-000-0020-9 ↗
24. Poon · IEEE Trans. Adv. Packaging · 2000 · 23 · 70810.1109/6040.883762 ↗