journal article·2001-03

Preparation and properties of rf sputtered Pb(Mg1/3Ta2/3)O3 thin films

C.H. Lee, T.Y. Lee

Materials Chemistry and Physics· Volume 69· Issue 1-3
Publisher page

Abstract

Abstract Radio frequency magnetron sputter deposition of Pb3MgTa2O9 (PMT) thin films on n-type (1 0 0) Si wafers is investigated in a low pressure ambient of Ar and O2. The process is optimized with process variables including rf power density, substrate temperature, ambient pressure, O2 mass flow and target composition. The properties of the films including refractive index, morphology, composition, crystallinity, microstructure and electrical properties are characterized as functions of the process parameters and correlated. The films as grown at 300°C are amorphous and become polycrystalline upon annealing at 600°C and above. The dielectric constants are between 29 and 129. The leakage current densities are below 1×10−7 A cm−2 at 1×106 V cm−1 and further improved after annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (5)

Show source-provided references
1. H. Shinrik, M. Nakata, IEEE Trans. ED-38 (1991) 445.
2. Ochrlcin · J. Appl. Phys. · 1983 · 54 · 650210.1063/1.331880 ↗
3. Francis · J. Am. Ceram. Soc. · 1991 · 74 · 300010.1111/j.1151-2916.1991.tb04293.x ↗
4. Kim · Ferroelectrics · 1990 · 108 · 24110.1080/00150199008018764 ↗
5. Kim · Ferroelectrics · 1994 · 158 · 25310.1080/00150199408216025 ↗