General model on position of the solid/liquid interface during preparation of a directionally solidified peritectic alloy containing intermetallic compound phases
Source abstract
Abstract
Abstract Based on our earlier work on thermal stabilization of Sn Ni peritectic alloy where both the primary and peritectic phases are intermetallic compound phases in an imposed temperature gradient, the migration of the solid/liquid interface and its position during thermal stabilization have been analyzed. The thermal stabilization after which the directional solidification takes place determines the initial growth condition of directional solidification, like the position (migration) of the solid/liquid interface. The migration of the solid/liquid interface is a rather interesting and complex phenomenon, which is directly determined by the relationship between three different melt concentrations: melt concentration of the boundary layer adjoining the solid/liquid interface CL, melt concentration of the complete-mixed zone Cm and the equilibrium melt concentration at the solid/liquid interface Ce. Both the downward migration by remelting of solid phases and upward migration by resolidification of solid phases have been discussed in this work. Downward/upward migration of the solid/liquid interface continues if CL is larger/smaller than Ce. During migration of the solid/liquid interface, the solute boundary layer is gradually destroyed. Analytical models have been established to describe the migration of the solid/liquid interface which is rather complex in peritectic systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Coarsening mechanisms, texture evolution and size distribution of Cu6Sn5 between Cu and Sn-based solders10.1016/j.matchemphys.2011.08.061 ↗
2. On secondary dendrite arm coarsening in peritectic solidification10.1016/j.msea.2004.07.032 ↗
3. Effect of peritectic reaction on dendrite coarsening in directionally solidified Sn-36at.%Ni alloy solidification10.1007/s10853-012-6527-7 ↗
4. Dependency of eutectic spacings and microhardness on the temperature gradient for directionally solidified Sn–Ag–Cu lead-free solde10.1016/j.matchemphys.2009.09.022 ↗
5. An experimental investigation of the columnar-to-equiaxed grain transition in aluminum–copper hypoeutectic and eutectic alloys10.1016/j.jcrysgro.2010.04.040 ↗
6. Vera · 2015 · 661
7. Vertical and horizontal directional solidification of Zn-Al and Zn-Ag diluted alloys10.2320/matertrans.M2010036 ↗
8. Melting and remelting phenomena10.1179/174328009X392930 ↗
9. Glicksman · 2011 · 181
10. Preparation of the initial solid-liquid interface and melt in directional solidification10.1016/S0022-0248(03)01041-8 ↗
11. Preparation of the initial solid-liquid interface and melt in directional solidification of Al-18at%Ni peritectic alloy10.1016/j.jcrysgro.2010.05.018 ↗
12. On melt concentration at the solid/liquid interface during preparation of directionally solidified Sn-36at.%Ni peritectic alloy10.1016/j.fluid.2014.12.016 ↗
13. Microstructure evolution during melting and resolidification in a temperature gradient10.1016/j.jcrysgro.2005.06.044 ↗
14. Stability of a planar interface during solidification of a dilute binary alloy10.1063/1.1713333 ↗
15. Temperature gradient zone melting
16. Dynamics of planar interface growth during directional solidification of alloys10.1016/j.scriptamat.2014.10.019 ↗
17. Initial dynamics of a solid–liquid interface within a thermal gradient10.1016/j.scriptamat.2014.06.006 ↗
18. Influence of solutal convection on solute distribution of melt during preparation of directionally solidified Sn-36at.%Ni peritectic alloy10.1016/j.ijheatmasstransfer.2015.01.021 ↗
19. In situ and real-time analysis of TGZM phenomena by synchrotron x-ray radiography10.1016/j.jcrysgro.2008.01.041 ↗
20. Solidification of peritectic alloys10.1179/imr.1996.41.4.129 ↗
21. Phase selection during solidification of peritectic alloys10.1016/S1359-6454(96)00038-9 ↗
22. Peritectic solidification of Cu–Sn alloys: microstructural competition at low speed10.1016/j.actamat.2008.08.058 ↗
23. A new investigation of the system Ni-Sn
24. Model of banding in diffusive and convective regimes during directional solidification of peritectic systems10.1007/s11661-998-0361-1 ↗
25. The distribution of solute in crystals grown from the melt-Part I Theoretical10.1063/1.1698728 ↗