journal article·2023-12Open access

High stability of LiCoO2 enabled by mixed conductor Li0.33La0.557Ti0.8Cr0.2O3 coating

Linyan Li, Benchao Shen, Gaolei Zhao, Bingxin Huang

Abstract

LiCoO 2 has excellent volume energy density , and is the dominant cathode materials for 3 C electronic products. However, the capacity of LiCoO 2 is not fully utilized, and its cycle stability is not high enough. To preserve the structural stability of LiCoO 2 at high voltage, the mixed ion-electron conductor Li 0.33 La 0.557 Ti 0.8 Cr 0.2 O 3 is coated on LiCoO 2 particles, and the effects of coating amount and annealing temperature on the electrochemical performances are systematically investigated. The capacity retention of the pristine LiCoO 2 in the range of 2.8–4.5 V is only 51.0% after 200 cycles, which is related to the resistance increase of interface and cracks of cathode particles. The coating layer can improve the interface stability and keep the particles intact, and therefore, the capacity retention of the coated sample is significantly increased to 88.2%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. A review on second-life of Li-ion batteries: prospects, challenges, and issues10.1016/j.energy.2021.122881 ↗
2. Effects of a solid electrolyte coating on the discharge kinetics of a LiCoO2 electrode: mechanism and potential applications10.1039/D0TA05656A ↗
3. Synthesis of high-voltage (4.7 V) LiCoO2 cathode materials with Al doping and conformal Al2O3 coating by atomic layer deposition10.1039/C6RA10531A ↗
4. Achieving stable cycling of LiCoO2 at 4.6 V by multilayer surface modification10.1002/adfm.202001974 ↗
5. Anticorrosive nanosized LiF thin film coating for achieving long-cycling stability of LiCoO2 at high voltages10.1016/j.ceramint.2021.12.247 ↗
6. Electrochemically driven phase transition in LiCoO2 cathode10.3390/ma14020242 ↗
7. Recent progress in all-solid-state lithium batteries: the emerging strategies for advanced electrolytes and their interfaces10.1016/j.ensm.2020.05.019 ↗
8. Electrode microstructure controls localized electronic impedance in Li-ion batteries10.1016/j.electacta.2018.11.204 ↗
9. Understanding volume change in lithium-ion cells during charging and discharging using in situ measurements10.1149/1.2386933 ↗
10. Modification of LiCoO2 through rough coating with lithium lanthanum zirconium tantalum oxide for high-voltage performance in lithium ion batteries10.1007/s10008-020-04529-x ↗
11. Surface-protected LiCoO2 with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries10.1016/j.jpowsour.2018.03.076 ↗
12. Multi-scale stabilization of high-voltage LiCoO2 enabled by nanoscale solid electrolyte coating10.1016/j.ensm.2020.03.031 ↗
13. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V10.1038/s41560-019-0409-z ↗
14. Improvement of float charge durability for LiCoO2 electrodes under high voltage and storage temperature by suppressing O1-Phase transition10.1016/j.jpowsour.2020.228127 ↗
15. Effects of Al doping on the microstructure of LiCoO2 cathode materials10.1016/S0167-2738(00)00828-6 ↗
16. Enhanced electrochemical performance of Mg-doped LiCoO2 synthesized by a polymer-pyrolysis method10.1016/j.ceramint.2014.03.170 ↗
17. Realization of Ti doping by electrostatic assembly to improve the stability of LiCoO2 cycled to 4.5 V10.1149/2.0421910jes ↗
18. Unraveling the multiple effects of Li2ZrO3 coating on the structural and electrochemical performances of LiCoO2 as high-voltage cathode materials10.1016/j.electacta.2016.05.066 ↗
19. Vapor-assisted synthesis of Al2O3-coated LiCoO2 for high-voltage lithium ion batteries10.1016/j.electacta.2015.05.180 ↗
20. A novel carbon-coated LiCoO2 as cathode material for lithium ion battery10.1016/j.elecom.2007.01.017 ↗
21. Boosting the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 by rough coating with the superionic conductor Li7La3Zr2O1210.1021/acsami.1c14229 ↗
22. Mixed lithium ion and electron conducting LiAlPO3.93F1.07-coated LiCoO2 cathode with improved electrochemical performance10.1016/j.elecom.2017.09.002 ↗
23. Effect of Al2O3 coating on electrochemical performance of LiCoO2 as cathode materials for secondary lithium batteries10.1016/j.jpowsour.2004.01.049 ↗
24. Enhanced cycle stability of LiCoO2 at high voltage by mixed conductive Li7.5La3Zr1.5Co0.5O12 coating10.1016/j.ceramint.2020.07.080 ↗
25. Mechanical and electrochemical properties of cubic and tetragonal LixLa0.557TiO3 perovskite oxide electrolytes10.1016/j.ceramint.2017.10.129 ↗
26. Preparation and properties of LixLa0.5TiO3 perovskite oxide electrolytes10.1111/jace.14946 ↗
27. Electrochemical and mechanical stability of LixLa0.557TiO3‐δ perovskite electrolyte at various voltages10.1111/jace.16049 ↗
28. Crystal structure analysis and first principle investigation of F doping in LiFePO410.1016/j.jpowsour.2013.04.109 ↗
29. Enhanced electrochemical performances of LiFePO4/C by co-doping with magnesium and fluorine10.1016/j.electacta.2013.09.044 ↗
30. Improvement in electronic conductivity of perovskite electrolyte by variable‐valence element doping10.1111/jace.17080 ↗
31. Temperature effects on the ionic conductivity in concentrated alkaline electrolyte solutions10.1039/C9CP06479F ↗
32. Comparative study of LiCoO2, LiNi12Co12O2 and LiNiO2 for 4 volt secondary lithium cells10.1016/0013-4686(93)80046-3 ↗
33. Crystal structure of a lithium ion-conducting perovskite La2/3−xLi3xTiO3 (x=0.05)10.1006/jssc.2002.9560 ↗
34. Electronic state of cobalt and oxygen ions in stoichiometric and nonstoichiometric Li1+xCoO2 before and after delithiation according to XPS and DRS10.1016/S0378-7753(03)00207-6 ↗
35. XPS analysis of new lithium cobalt oxide thin-films before and after lithium deintercalation10.1016/S0040-6090(00)01802-2 ↗
36. Improvement of electrochemical performance and structural stability of LiNi0.83Co0.12Mn0.05O2 at high-voltage by La and Ti modification10.1016/j.jallcom.2022.164592 ↗
37. Enhancing electrochemical performance of LiNi0.6Co0.2Mn0.2O2 by lithium-ion conductor surface modification10.1016/j.electacta.2016.12.024 ↗
38. Peak fitting of the chromium 2p XPS spectrum10.1016/0169-4332(95)00168-9 ↗
39. Manganese phosphate coated Li[Ni0.6Co0.2Mn0.2]O2 cathode material: towards superior cycling stability at elevated temperature and high voltage10.1016/j.jpowsour.2018.09.049 ↗
40. Depolarization effect to enhance the performance of lithium ions batteries10.1016/j.nanoen.2017.02.011 ↗
41. High-rate and cycling-stable nickel-rich cathode materials with enhanced Li(+) diffusion pathway10.1021/acsami.5b09641 ↗
42. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials10.1016/j.ensm.2021.03.015 ↗
43. Improved high-voltage and high-temperature electrochemical performances of LiCoO2 cathode by electrode sputter-coating with Li3PO410.1016/j.jpowsour.2016.04.092 ↗
44. Atomistic mechanism of cracking degradation at twin boundary of LiCoO210.1016/j.nanoen.2020.105364 ↗
45. Regulating surface and grain-boundary structures of Ni-rich layered cathodes for ultrahigh cycle stability10.1002/smll.201906433 ↗
46. Impact of microcrack generation and surface degradation on a nickel-rich layered Li[Ni0.9Co0.05Mn0.05]O2 cathode for lithium-ion batteries10.1021/acs.chemmater.7b03268 ↗