Preparation of ultrafine titanium nitride powders in xNa2O · yTiO2 -C - N2 system
Source abstract
Abstract
Abstract The precursor xerogels were prepared by using citric acid, tetrabutyl titanate, and sodium carbonate as raw materials. Xerogels were heat - treated in flowing N2 to obtain TiN nanoparticles. The influence of the introduction of Na+ in the precursor on the synthesis of TiN was studied, and the results shown that the addition of Na+ significantly decreased the formation temperature of TiN and accelerated the reaction process. The xNa2O · yTiO2 - C - N2 system was formed at 800 °C, and xNa2O · yTiO2 provided Na (g) to the system during transformation. With the increase of temperature, the concentration of Na (g) in the system increased, and the gas - solid reaction between Na (g) and TiO was carried out, and TiN particles with particle size of 10–30 nm were obtained at 1000 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Structure and properties of TiN coatings10.1016/0040-6090(85)90333-5 ↗
2. Effect of deposition conditions and post deposition anneal on reactively sputtered titanium nitride thin films10.1016/j.tsf.2015.02.009 ↗
3. Nanocomposite multilayer binary nitride coatings based on transition and refractory metals: structure and properties10.3390/coatings9030155 ↗
4. Friction and wear of TiN–Si3N4 nanocomposites against ShKh15 steel10.1007/s11106-015-9663-1 ↗
5. Plasma synthesis of titanium nitride, carbide and carbonitride nanoparticles by means of reactive anodic arc evaporation from solid titanium10.1007/s11051-015-2967-8 ↗
6. Nanoparticle plasmonics: going practical with transition metal nitrides10.1016/j.mattod.2014.10.039 ↗
7. Research of TiN coatings by means of gas tunnel type plasma reactive spraying
8. A "phase" approach to superplastic deformation10.1016/0956-7151(92)90193-I ↗
9. Nanocomposite hard coatings for wear protection10.1557/mrs2003.59 ↗
10. Ceramic-ceramic composite materials with improved friction and wear properties
11. Colloidal plasmonic titanium nitride nanoparticles: properties and applications10.1515/nanoph-2015-0017 ↗
12. A biocompatible titanium nitride nanorods derived nanostructured electrode for biosensing and bioelectrochemical energy conversion10.1016/j.bios.2011.03.040 ↗
13. Preparation of TiN nanopowder by carbothermal reduction of a combustion synthesized precursor10.1016/j.matchar.2013.04.010 ↗
14. Aerosol synthesis of titanium nitride nanoparticles by direct current arc discharge method10.1016/j.apt.2020.08.012 ↗
15. Synthesis of titanium carbonitride nano-powder by carbothermal reduction of TiO210.1016/j.ijrmhm.2013.10.002 ↗
16. Formation of submicrometer titanium nitride from a titanium dioxide/phenolic resin composite10.1007/s10853-017-0987-8 ↗
17. Reaction sequences and influence factors during carbothermal synthesis of ultrafine TiN powders10.1007/s10853-006-0468-y ↗
18. Preparation of titanium nitride: microwave-induced carbothermal reaction of titanium dioxide10.1111/j.1151-2916.2002.tb00051.x ↗
19. Preparation of titanium nitride ultrafine powders by sol–gel and microwave carbothermal reduction nitridation methods10.1016/j.ceramint.2008.04.027 ↗
20. Synthesis of titanium nitride in a thermal plasma reactor10.1016/S0925-8388(99)00060-2 ↗
21. Synthesis of nanocrystalline titanium nitride by microwave plasma technique10.1007/s42452-019-0836-2 ↗
22. Rapid synthesis of titanium nitride powder by electrical discharge assisted mechanical milling10.1016/j.jallcom.2005.11.089 ↗
23. Synthesis of titanium nitride powders by reactive ball milling of titanium and urea10.1016/j.jallcom.2009.04.043 ↗
24. A sol-gel route to titanium nitride conductive coatings on battery materials and performance of TiN-coated LiFePO410.1039/C6TA09572K ↗
25. Synthesis and application of nano-structured metal nitrides and carbides: a review10.1016/j.progsolidstchem.2018.05.001 ↗
26. Preparation of barium strontium titanate powder from citrate precursor10.1002/(SICI)1099-0739(199905)13:5<383::AID-AOC836>3.0.CO;2-P ↗
27. pH-dependent isolations and spectroscopic, structural, and thermal studies of titanium citrate complexes10.1021/ic0496018 ↗
28. Ba0.5Sr0.5TiO3 dielectric materials prepared by citrate-nitrate Combustion
29. Preparation of La2(CexZr1-x)2O7 nano-porous powders via citric acid derived sol-gel processing10.4028/www.scientific.net/AMR.833.197 ↗
30. Titanium(IV) citrate speciation and structure under environmentally and biologically relevant conditions10.1021/ic048158y ↗
31. Preparation and characterization of yttrium-titanium citrate complexes10.1002/(SICI)1521-3749(200006)626:6<1488::AID-ZAAC1488>3.0.CO;2-I ↗
32. Highly plasmonic titanium nitride by room-temperature sputtering10.1038/s41598-019-51236-3 ↗
33. One-step synthesis of titanium nitride/nitrogen-doped graphene nanocomposite as separator modifying material for advanced lithium-sulfur batteries10.1016/j.jallcom.2020.155543 ↗
34. Titanium nitride oxidation chemistry: an x‐ray photoelectron spectroscopy study10.1063/1.351465 ↗
35. Evolution of chemical, structural, and mechanical properties of titanium nitride thin films deposited under different nitrogen partial pressure10.1016/j.rinp.2020.103416 ↗
36. Thermodynamic and kinetic analyses of the CO2 chemisorption mechanism on Na2TiO3: experimental and theoretical evidences10.1021/jp504922e ↗
37. Synthesis and crystal structure of Na2TiO3
38. Synthesis of anatase TiO2 having high specific surface area from a gel precursor10.4028/www.scientific.net/KEM.485.279 ↗
39. Synthesis of sodium titanate by crystallization of amorphous phase and crystalline structure transition