journal article·2021-11

Novel solid-state pressureless approach for Cu-embedded intermetallic interconnects at low temperature

Kuo-Shuo Huang, Tzu-Hao Shen, Wei Liu, Jui-Lin Chao, Albert T. Wu

Publisher page

Abstract

Abstract A pressureless low-temperature Cu-embedded intermetallic joint for interconnects is fabricated using a Cu-based mixed paste containing different amounts of SAC305 (SAC) particles. The highest joint's shear strength reaches 24.2 MPa. The average of the shear strength is 19.2 (±4.3) MPa, which is also high for pressureless solid-state bonding. After a solid-state interdiffusion bonding process, the joint is composed of an intermetallic-compound (IMC) shell and the Cu core particles. TEM analysis indicates a coherent interface between the core and shell. The ductile Cu phase mixed with brittle IMC in the joint enhances its strength. This study validates that void fraction in the joints is not the sole factor that affects the joint's properties. A mathematical model proves that the IMC thickness and IMC interfacial areas make significant contributions for robust interconnects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. High-temperature lead-free solder alternatives10.1016/j.mee.2010.12.072 ↗
2. A review on die attach materials for SiC-based high-temperature power devices10.1007/s11663-010-9365-5 ↗
3. A review: formation of voids in solder joint during the transient liquid phase bonding process - causes and solutions10.1016/j.microrel.2019.04.024 ↗
4. Development of high-temperature solders: Review10.1016/j.microrel.2012.02.018 ↗
5. Synthesis of Au–Sn alloy nanoparticles for lead-free electronics with unique combination of low and high melting temperatures10.1016/j.microrel.2012.04.008 ↗
6. Low temperature sintering of Ag nanoparticles for flexible electronics packaging10.1063/1.3502604 ↗
7. Metal?metal bonding process using Ag metallo-organic nanoparticles10.1016/j.actamat.2005.01.047 ↗
8. Influence of bonding condition on bonding process using Ag metallo-organic nanoparticles for high temperature lead-free packaging10.2320/matertrans.47.211 ↗
9. A new one-pot method for the synthesis of Cu nanoparticles for low temperature bonding10.1039/c2jm34954j ↗
10. Fabrication of conductive copper films on flexible polymer substrates by low-temperature sintering of composite Cu ink in air10.1021/acsami.7b04641 ↗
11. Synthesis of oxidation-resistant core–shell copper nanoparticles10.1039/c3ra41480a ↗
12. Metal–metal bonding process using metallic copper nanoparticles prepared in aqueous solution10.1016/j.ijadhadh.2011.11.002 ↗
13. Highly conductive Cu-Cu joint formation by low-temperature sintering of formic acid-treated Cu nanoparticles10.1021/acsami.6b10280 ↗
14. Cu-Cu bonding enhancement at low temperature by using carboxylic acid surface-modified Cu nanoparticles10.1016/j.matlet.2018.05.037 ↗
15. Effect of carboxylic acids on conductivity of metallic films formed by inks based on copper@silver core-shell particles10.1016/j.colsurfa.2017.03.019 ↗
16. Microstructural stability of Ag sinter joining in thermal cycling10.1007/s10854-012-0929-9 ↗
17. Fabrication of interconnects using pressureless low temperature sintered Ag nanoparticles10.1016/j.matlet.2012.06.089 ↗
18. Influence of joining conditions on bonding strength of joints: efficacy of low-temperature bonding using Cu nanoparticle paste10.1007/s11664-013-2583-2 ↗
19. Pressureless bonding process using Ag nanoparticle paste for flexible electronics packaging10.1016/j.scriptamat.2012.01.007 ↗
20. Interfacial reaction in Cu/Sn/Cu system during the transient liquid phase soldering process10.1016/j.actamat.2010.10.053 ↗
21. A comparative study of Cn/Sn/Cu and Ni/Sn/Ni solder joints for low temperature stable transient liquid phase bonding10.1016/j.scriptamat.2015.07.032 ↗
22. Effect of powders on microstructures and mechanical properties for Sn–Ag transient liquid phase bonding in air10.1007/s10854-018-9076-2 ↗
23. Wafer bonding using Cu–Sn intermetallic bonding layers
24. Thermal stress assessment for transient liquid-phase bonded Si chips in high-power modules using experimental and numerical methods10.1007/s11664-016-5064-6 ↗
25. Effects of the intermetallic compound microstructure on the tensile behavior of Sn3.0Ag0.5Cu/Cu solder joint under various strain rates10.1016/j.microrel.2014.01.008 ↗
26. Strength of joints produced by transient liquid phase bonding in the Cu–Sn system10.1016/j.actamat.2005.01.013 ↗
27. On the toughness of brittle materials reinforced with a ductile phase10.1016/0001-6160(88)90149-6 ↗
28. Cu@Sn core–shell structure powder preform for high-temperature applications based on transient liquid phase bonding10.1109/TPEL.2016.2535365 ↗
29. Thermally stable Cu 3 Sn/Cu composite joint for high-temperature power device10.1016/j.scriptamat.2015.08.011 ↗
30. Low temperature solid-state bonding using Sn-coated Cu particles for high temperature die attach10.1016/j.jallcom.2016.11.064 ↗
31. Extreme ultraviolet lithography and three dimensional integrated circuit—a review10.1063/1.4863412 ↗
32. Roman · 1992
33. Leong DAK the study of void formation in Ag sinter joint
34. Tatsumi · 2019
35. Kinetics of the η–η′ transformation in Cu6Sn510.1016/j.scriptamat.2011.07.058 ↗
36. Impurity and alloying effects on interfacial reaction layers in Pb-free soldering10.1016/j.mser.2009.12.001 ↗
37. Diffusion parameters and growth mechanism of phases in the Cu-Sn system10.1007/s11661-010-0592-9 ↗