Effects of various treatment procedures and pulse power modes on the photoelectric efficiency of Ti-PEO photocatalysts
Source abstract
Abstract
Abstract In this study, various treatment methods were developed to achieve suitable structural phase control for the oxide layer of Ti plasma electrolytic oxidation (PEO) photocatalysts to improve their photoelectric conversion efficiency. To achieve the aforementioned purpose and to increase the doping efficiency, a three-stage PEO manufacturing procedure was developed and applied. In the first stage, the porous morphology and specific structural phases of a pretreated layer were controlled for doping preparation. In the second stage, doping elements were added into the surface and pores of the pretreated layer using the impregnation method. Finally, in the third stage, PEO was performed with different control parameters. The treatment factors in this study were the amount of manganese ion impregnation; the porosity, pore diameter, crystal structure, and carrier used in the treatment process; and the applied power mode. The effects of structural phase control, the Mn+ impregnation concentration, and the applied power modes on the carrier concentration were studied. The results indicated that the designed treatment method can effectively control the characteristics of oxide layers. By applying the impregnation method, the doping amount of Mn+ was increased more than five-fold compared with that in the single-step PEO treatment. Furthermore, to understand the treatment mechanism, the absorption spectrum, doping efficiency, Mn+ distribution, and mass transfer mechanism (of anions and cations) were investigated under direct, pulsed unipolar, and pulsed bipolar current. Finally, the functioning of the manufactured Mn: TiO2 (PEO) photocatalyst was verified with toluene under ultraviolet A, blue, and white LED light.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · TiO2 Photocatalysis and Solar Cells · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Performance of an innovative VUV-PCO purifier with nanoporous TiO2 film for simultaneous elimination of VOCs and by-product ozone in indoor air10.1016/j.buildenv.2018.06.047 ↗
2. The effect of different portions of the sunlight spectrum on ethylene evolution in Peach (Prunus persica) Apices10.1111/j.1399-3054.1977.tb01885.x ↗
3. Emissions and treatment of VOCs emitted from wood-based construction materials: impact on indoor air10.1016/j.cej.2018.08.085 ↗
4. Recent progress and perspectives in biotrickling filters for VOCs and odorous gases treatment10.1016/j.jenvman.2018.06.001 ↗
5. Coronado · 2013
6. Conducting polymer nanostructures for photocatalysis under visible light10.1038/nmat4220 ↗
7. Mn-doped TiO2 photocatalysts: role, chemical identity, and local structure of dopant10.1016/j.jpcs.2020.109517 ↗
8. Photocatalytic degradation of organic dyes with manganese-doped ZnO nanoparticles10.1016/j.jhazmat.2007.12.033 ↗
9. Synthesis and visible-light photocatalytic activity of Bi-doped TiO2 nanobelts10.1016/j.matlet.2009.06.043 ↗
10. Assemble of Bi-doped TiO2 onto 2D MoS2: an efficient p–n heterojunction for photocatalytic H2 generation under visible light10.1088/1361-6528/abe152 ↗
11. Enhanced charge separation and FRET at heterojunctions between semiconductor nanoparticles and conducting polymer nanofibers for efficient solar light harvesting
12. TiO2 photocatalyst for removal of volatile organic compounds in gas phase – a review10.1016/j.cej.2017.09.153 ↗
13. Highly efficient oxidation of gaseous benzene on novel Ag3VO4/TiO2 nanocomposite10.1021/jp301355q ↗
14. A review of TiO2 nanoparticles
15. Indium-doped TiO2 nanoparticles for photocatalytic CO2 reduction with H2O vapors to CH410.1016/j.apcatb.2014.06.037 ↗
16. Photoinduced reactivity of titanium dioxide10.1016/j.progsolidstchem.2004.08.001 ↗
17. Photocatalytic oxidation of gaseous benzene, toluene and xylene under UV and visible irradiation over Mn-doped TiO2 nanoparticles10.1016/j.jmat.2018.12.003 ↗
18. Determination of electron and hole lifetimes of rutile and anatase TiO2 single crystals10.1063/1.4754831 ↗
19. Photocatalytic activity improvement and application of UV-TiO2 photocatalysis in textile wastewater treatment: a review
20. A review on the visible light active titanium dioxide photocatalysts for environmental applications10.1016/j.apcatb.2012.05.036 ↗
21. Preparation of rutile TiO2 coating by thermal chemical vapor deposition for anticoking applications10.1021/am5048762 ↗
22. A review on the synthesis of the various types of anatase TiO2 facets and their applications for photocatalysis10.1016/j.cej.2019.123384 ↗
23. Well-defined nanostructured, single-crystalline TiO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsnano.6b01575 ↗
24. Advances on the synthesis of porous TiO2 coating by anodic spark oxidation. Photocatalytic reduction of Cr (VI)10.1016/j.matchemphys.2017.01.034 ↗
25. Plasma formation mechanism of microarc oxidation10.1016/j.electacta.2014.01.047 ↗
26. Electrical breakdown of microwave plasma in water10.1016/j.cap.2013.02.012 ↗
27. Electrical characteristics identification of dielectric film breakdown during plasma electrolytic oxidation process10.1016/j.matlet.2014.12.066 ↗
28. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
29. Pt/TiO2 photocatalysts deposited on commercial support for photocatalytic reduction of CO210.1016/j.jphotochem.2018.04.012 ↗
30. Liang · 2013
31. Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology10.1016/S0257-8972(02)00918-0 ↗
32. TiO2 as an effective nanocatalyst for photocatalytic degradation of humic acid in water environment10.2166/aqua.2016.102 ↗
33. State of doped phosphorus and its influence on the physicochemical and photocatalytic properties of P-doped titania
34. Phase development and photocatalytic ability of gel-derived P-doped TiO210.1557/jmr.2007.0316 ↗
35. Determination of photo-catalytic activity of un-doped and Mn-doped TiO2 anatase powders on acetaldehyde under UV and visible light10.1016/j.tsf.2011.07.073 ↗
36. Structural and photocatalytic studies of Mn doped TiO2 nanoparticles10.1016/j.saa.2012.08.009 ↗
37. Prozac® photodegradation mediated by Mn-doped TiO2 nanoparticles: evaluation of by-products and mechanisms proposal10.1016/j.jece.2020.104543 ↗
38. γ-C3N4/(Cu/TiO2) nanocomposite for enhanced photoreduction of CO2 to CH3OH and HCOOH under UV/visible light10.1016/j.jcou.2017.02.004 ↗
39. Hydrothermal synthesis of hollow Mn2O3 nanocones as anode material for Li-ion batteries10.1039/c3ra42664e ↗
40. Evidence of enhanced oxygen vacancy defects inducing ferromagnetism in multiferroic CaMn7O12 manganite with sintering time10.1021/acs.jpcc.7b05415 ↗
41. Tuning oxygen vacancy content in TiO2 nanoparticles to enhance the photocatalytic performance10.1016/j.ces.2021.116440 ↗
42. Hydrothermal fabrication of rutile TiO2 submicrospheres on wood surface: an efficient method to prepare UV-protective wood10.1016/j.matchemphys.2012.01.018 ↗
43. A simple and novel synthetic route to prepare anatase TiO2 nanopowders from natural ilmenite via the H3PO4/NH3 process10.1007/s12613-020-2030-3 ↗
44. X-ray computed tomographic investigation of the porosity and morphology of plasma electrolytic oxidation coatings10.1021/acsami.6b00274 ↗
45. New findings on properties of plasma electrolytic oxidation coatings from study of an Al-Cu-Li alloy10.1016/j.electacta.2013.06.022 ↗