Investigation of the nanostructure of as-deposited and post-coat annealed CrCuAgN PVD nanocomposite coatings
Source abstract
Abstract
CrCuAgN coatings with a wide range of Cu and Ag contents (combined values in the range of <10 at% to >50 at%) were prepared on AISI316L stainless steel coupons by closed-field unbalanced magnetron sputtering(CFUBMS). After the deposition process, the coated coupons were annealed at 300 °C and 500 °C, respectively. The transport behaviour of Cu and Ag in selected CrCuAgN coatings was then investigated by conventional and high-resolution transmission electron microscopy (HR/TEM), energy-filtered (EF)TEM elemental mapping, and scanning (S)TEM with EDX elemental mapping. Results showed that the aggregation of both Cu and Ag are detachment-limited, rather than diffusion-limited. The co-existence of Cu with Ag in a PVD metallic coating was found to be beneficial in promoting Ag transport to the coating surface, resulting not from the anticipated “intergranular network channels” of Cu, but from a much higher detachment rate of Cu than Ag. This study verified that CrCuAgN coatings with desired composition and nanostructure can be obtained via coating/process design, providing controllable precipitation rate of Ag (via adjusting Cu content) for practical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Mechanical and tribological properties of CrAlN-Ag self-lubricating films10.1016/j.surfcoat.2007.05.088 ↗
2. Effect of copper addition on the temperature dependent reciprocating wear behaviour of CrN coatings10.1016/j.surfcoat.2007.05.049 ↗
3. A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings10.1016/j.surfcoat.2006.03.037 ↗
4. A study on the influence of copper content in CrN/Cu nanocomposite thin films prepared by pulsed DC magnetron sputtering10.1166/jnn.2009.1129 ↗
5. Nanostructured self-lubricating CrN-Ag films deposited by PVD arc discharge and magnetron sputtering10.1016/j.vacuum.2011.01.022 ↗
6. Papi · 2012 · 211
7. Structure and mechanical properties of nitrogen-containing Zr–Cu based thin films deposited by pulsed magnetron sputtering10.1088/0022-3727/41/15/155301 ↗
8. Microstructure and vacuum tribology of TiC–Ag composite coatings deposited by magnetron sputtering-pulsed laser deposition10.1016/S0257-8972(02)00138-X ↗
9. Microstructure and tribology of TiC (Ag)/aC: H nanocomposite coatings deposited by unbalanced magnetron sputtering10.1016/j.surfcoat.2012.01.036 ↗
10. Growth and structural characterization of yttria-stabilized zirconia–gold nanocomposite films with improved toughness10.1016/S0040-6090(01)01615-7 ↗
11. Tribology of adaptive nanocomposite yttria-stabilized zirconia coatings containing silver and molybdenum from 25 to 700 C10.1016/j.wear.2006.01.029 ↗
12. Adaptive nanocomposite coatings with a titanium nitride diffusion barrier mask for high-temperature tribological applications10.1016/j.tsf.2006.09.051 ↗
13. High‐temperature tribological behavior of CrN‐Ag self‐lubricating coatings10.1002/adem.200600131 ↗
14. CrN–Ag nanocomposite coatings: high-temperature tribological response10.1016/j.wear.2010.03.015 ↗
15. CrN–Ag nanocomposite coatings: tribology at room temperature and during a temperature ramp10.1016/j.surfcoat.2009.09.018 ↗
16. Microstructural, nanomechanical and antibacterial properties of magnetron sputtered nanocomposite thin films of CrN/Cu10.1179/1743294411Y.0000000072 ↗
17. CrCuAgN PVD nanocomposite coatings: effects of annealing on coating morphology and nanostructure10.1016/j.apsusc.2016.09.011 ↗
18. Bactericidal and corrosive properties of silver implanted TiN thin films coated on AISI317 stainless steel10.1016/j.surfcoat.2006.07.172 ↗
19. The effect of Cu content on the microstructures, mechanical and antibacterial properties of Cr-Cu-N nanocomposite coatings deposited by pulsed DC reactive magnetron sputtering10.1016/j.surfcoat.2007.05.062 ↗
20. A study of the antimicrobial and tribological properties of TiN/Ag nanocomposite coatings10.1016/j.surfcoat.2009.05.012 ↗
21. The role of Acticoat™ with nanocrystalline silver in the management of burns10.1016/S0305-4179(04)90000-9 ↗
22. The role of roughness and porosity on the self-cleaning and anti-biofouling efficiency of TiO2-Cu and TiO2-Ag nanocoatings applied on fired bricks10.1016/j.conbuildmat.2016.10.111 ↗
23. Plasma deposition of silver nanoparticles on ultrafiltration membranes: antibacterial and anti-biofouling properties10.1016/j.cherd.2014.09.014 ↗
24. Development and evaluation of anti-biofouling nano-composite coatings
25. Control of lubricant transport by a CrN diffusion barrier layer during high-temperature sliding of a CrN–Ag composite coating10.1016/j.surfcoat.2010.07.071 ↗
26. CrN–Ag self-lubricating hard coatings10.1016/j.surfcoat.2005.08.063 ↗
27. Comparative tribological behaviors of TiN, CrN and MoNCu nanocomposite coatings10.1016/j.triboint.2007.04.008 ↗
28. CrN–Ag nanocomposite coatings: effect of growth temperature on the microstructure10.1016/j.surfcoat.2008.06.052 ↗
29. Ag transport in CrN-Ag nanocomposite coatings10.1016/j.tsf.2012.06.082 ↗
30. Metastable coatings—prediction of composition and structure10.1016/0257-8972(88)90145-4 ↗
31. The nanostructure and mechanical properties of PVD CrCu (N) coatings10.1016/S0257-8972(02)00571-6 ↗
32. Microstructure and mechanical properties of pulsed DC magnetron sputtered nanocomposite Cr–Cu–N thin films10.1016/j.surfcoat.2006.08.092 ↗
33. The combined effects of Cu and Ag on the nanostructure and mechanical properties of CrCuAgN PVD coatings10.1016/j.surfcoat.2015.08.070 ↗
34. Liu · 2017
35. Atomic screening constants from SCF functions. II. Atoms with 37 to 86 electrons10.1063/1.1712084 ↗
36. Massalski · 1986
37. First-principles calculation of the Ag-Cu phase diagram10.1103/PhysRevB.44.5411 ↗
38. Moffatt · 1976
39. Subramanian · 1994
40. Porter · 1992 · 132
41. Ostwald ripening of two-phase mixtures10.1146/annurev.ms.22.080192.001213 ↗