journal article·2021-07Open access

Synthesis and study of highly dense and smooth TiN thin films

Susmita Chowdhury, Rachana Gupta, Shashi Prakash, Layanta Behera, D.M. Phase, Mukul Gupta

Abstract

This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N$_2$ gas, ion energy (\Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature (300\,K). At the optimum partial pressure of N$_2$ gas, samples were prepared with or without Ti interface at \Ei~=~1.0 or 0.5\,keV. They were characterized using x-ray reflectivity (XRR) to deduce thickness, roughness and density. The roughness of TiN thin films was found to be below 1\,nm, when deposited at the lower \Ei~of 0.5\,keV and when interfaced with a layer of Ti. Under these conditions, the density of TiN sample reaches to 5.80($\pm$0.03)\,g~cm$-3$, a value highest hitherto for any TiN sample. X-ray diffraction and electrical resistivity measurements were performed. It was found that the cumulative effect of the reduction in \Ei~from 1.0 to 0.5\,keV and the addition of Ti interface favors (111) oriented growth leading to dense and smooth TiN films and a substantial reduction in the electrical resistivity. The reduction in \Ei~has been attributed to the surface kinetics mechanism (simulated using SRIM) where the available energy of the sputtered species (\Esp) leaving the target at \Ei~= 0.5\,keV is the optimum value favoring the growth of defects free homogeneously distributed films. The electronic structure of samples was probed using N K-edge absorption spectroscopy and the information about the crystal field and spin-orbit splitting confirmed TiN phase formation. In essence, through this work, we demonstrate the role of \Esp~and Ti interface in achieving highly dense and smooth TiN thin films with low resistivity without the need of a high temperature or substrate biasing during the thin film deposition process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · ZnO doping and properties · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Review of transition metal nitrides and transition metal nitrides/carbon nanocomposites for supercapacitor electrodes10.1016/j.matchemphys.2019.122533 ↗
2. Morphology of titanium nitride produced using glow discharge nitriding, laser remelting and pulsed laser deposition10.1016/S0254-0584(02)00591-6 ↗
3. Study on structural, morphological and electrical properties of sputtered titanium nitride films under different argon gas flow10.1016/j.matchemphys.2012.03.078 ↗
4. The microstructure of transparent and electrically conducting titanium nitride films10.1016/S0254-0584(98)00035-2 ↗
5. Investigating the structure and tribo-mechanical performance of pvd tin on bearing tin substrate constructed by rf plasma10.1016/j.matchemphys.2018.12.004 ↗
6. Toth · 1971 · vol. 7 · 88
7. Effect of Ti interlayer on the residual stress and texture development of TiN thin films10.1016/j.surfcoat.2005.09.005 ↗
8. Conductive nitrides: growth principles, optical and electronic properties, and their perspectives in photonics and plasmonics10.1016/j.mser.2017.11.001 ↗
9. Titanium nitride as a plasmonic material for visible and near-infrared wavelengths10.1364/OME.2.000478 ↗
10. Empowering plasmonics and metamaterials technology with new material platforms10.1557/mrs.2014.91 ↗
11. Cryogenic characterization of titanium nitride thin films10.1364/OME.9.002117 ↗
12. Mechanical properties of ion-plated TiN films on AISI D2 steel10.1016/S0257-8972(98)00680-X ↗
13. TiNx(0.6˂x˂ 1.2): atomic arrangements, Electronic structure and recent results on crystal growth and physical properties of epitaxial layers10.1063/1.36035 ↗
14. Effects of high-flux low-energy ion bombardment on the low-temperature growth morphology of tin (001) epitaxial layers10.1103/PhysRevB.61.16137 ↗
15. Resistivities of titanium nitride films prepared onto silicon by an ion beam assisted deposition method10.1088/0022-3727/37/7/023 ↗
16. Effects of sputtering gas on microstructure and tribological properties of titanium nitride films10.1016/j.apsusc.2019.05.148 ↗
17. Superior-performance TiN films sputtered for capacitor electrodes10.1007/s10853-019-03652-z ↗
18. The effect of substrate temperature and biasing on the mechanical properties and structure of sputtered titanium nitride thin films10.1016/S0257-8972(99)00606-4 ↗
19. Nanohardness of nanocrystalline TiN thin films10.1016/j.surfcoat.2004.10.098 ↗
20. Substrate and annealing temperature dependent electrical resistivity of sputtered titanium nitride thin films10.1016/j.tsf.2018.07.001 ↗
21. Structure and properties of TiN coatings10.1016/0040-6090(85)90333-5 ↗
22. Effect of substrate preparation and deposition conditions on the preferred orientation of TiN coatings deposited by RF reactive sputtering10.1016/S0257-8972(00)00867-7 ↗
23. Ion beam induced crystalline texturing during thin film deposition10.1016/j.surfcoat.2014.12.018 ↗
24. Nanoindentation studies of single-crystal (001)-,(011)-, and (111)-oriented TiN layers on MgO10.1063/1.363799 ↗
25. Effect of thickness on the structure, composition and properties of titanium nitride nano-coatings10.1016/j.ceramint.2013.11.014 ↗
26. Effect of bias on structure mechanical properties and corrosion resistance of TiNx films prepared by ion source assisted magnetron sputtering10.1016/j.tsf.2019.02.037 ↗
27. Conformal chemical vapor deposition TiN (111) film formation as an underlayer of Al for highly reliable interconnects10.1143/JJAP.33.470 ↗
28. Low energy ion assist during deposition—an effective tool for controlling thin film microstructure10.1016/S0168-583X(97)00010-4 ↗
29. Fully dense, non-faceted 111-textured high power impulse magnetron sputtering TiN films grown in the absence of substrate heating and bias10.1016/j.tsf.2010.05.064 ↗
30. Cemin · 2019
31. Interdependence between stress, preferred orientation, and surface morphology of nanocrystalline TiN thin films deposited by dual ion beam sputtering10.1063/1.2197287 ↗
32. Room temperature fabrication of titanium nitride thin films as plasmonic materials by high-power impulse magnetron sputtering10.1364/OME.6.000540 ↗
33. Research on titanium nitride thin films deposited by reactive magnetron sputtering for mems applications10.1016/j.apsusc.2015.07.063 ↗
34. Optical, electronic, and transport properties of nanocrystalline titanium nitride thin films10.1063/1.1403677 ↗
35. Dense fully 111-textured TiN diffusion barriers: enhanced lifetime through microstructure control during layer growth10.1063/1.371271 ↗
36. Surfactant induced symmetric and thermally stable interfaces in Cu/Co multilayers10.1088/0953-8984/23/48/485003 ↗
37. Chowdhury · 2020
38. Development of soft X-ray polarized light beamline on Indus-2 synchrotron radiation source10.1063/1.4872719 ↗
39. X-ray absorption near-edge structure (XANES) spectroscopy10.2138/rmg.2014.78.3 ↗
40. SRIM–the stopping and range of ions in matter10.1016/j.nimb.2010.02.091 ↗
41. Braun · 1999
42. Surface studies of solids by total reflection of X-rays10.1103/PhysRev.95.359 ↗
43. Tolan · 1999 · vol. 148
44. In situ soft x-ray absorption spectroscopic study of polycrystalline Fe/MgO interfaces10.1088/1361-648X/aaf8e2 ↗
45. Interface sharpening in miscible and isotopic multilayers: role of short-circuit diffusion10.1103/PhysRevB.99.205413 ↗
46. Study of phase formulation in CrN thin films and its response to a minuscule oxygen flow in reactive sputtering process10.1016/j.tsf.2018.10.009 ↗
47. Reactive high rate DC sputtering: deposition rate, stoichiometry and features of TiOx and TiNx films with respect to the target mode10.1016/0040-6090(84)90147-0 ↗
48. Fundamental understanding and modeling of reactive sputtering processes10.1016/j.tsf.2004.10.051 ↗
49. Tutorial: reactive high power impulse magnetron sputtering (R-HiPIMS)10.1063/1.4978350 ↗
50. Properties of magnetron-deposited polycrystalline TiN layers10.1016/0040-6090(90)90378-Q ↗
51. Mechanisms of reactive sputtering of titanium nitride and titanium carbide I: influence of process parameters on film composition10.1016/0040-6090(83)90318-8 ↗
52. Surface kinetics and subplantation phenomena affecting the texture, morphology, stress, and growth evolution of titanium nitride films10.1063/1.1811389 ↗
53. Reactive-sputter-deposited TiN films on glass substrates10.1016/0040-6090(91)90225-M ↗
54. Comparison of surface oxidation of titanium nitride and chromium nitride films studied by X-ray absorption and photoelectron spectroscopy10.1116/1.580764 ↗
55. Dependence of microstructure of TiN coatings on their thickness10.1016/0040-6090(88)90024-7 ↗
56. Structure and properties of titanium nitride thin films deposited at low temperatures using direct current magnetron sputtering10.1116/1.579155 ↗
57. X-ray reflectivity and diffuse scattering
58. Reactive sputter deposition of tin layers: modelling the growth by characterization of particle fluxes towards the substrate10.1088/0022-3727/42/5/053002 ↗
59. Surfactant mediated growth of Ti/Ni multilayers10.1063/1.3565161 ↗
60. Deposition and mechanical properties of multilayered PVD Ti- TiN coatings10.1016/0257-8972(95)02589-8 ↗
61. Quantum interference effects in titanium nitride films at low temperatures10.1016/j.tsf.2019.05.005 ↗
62. Synthesis, electron transport properties of transition metal nitrides and applications10.1016/j.pmatsci.2014.11.004 ↗
63. ATHENA, ARTEMIS, HEPHAESTUS: data analysis for X-ray absorption spectroscopy using IFEFFIT10.1107/S0909049505012719 ↗
64. NK electron energy-loss near-edge structures for TiN/VN layers: an ab initio and experimental study10.1007/s00216-007-1759-0 ↗
65. Electronic structure of unoccupied states of TiC, TiN, and VN by electron-energy-loss-spectroscopy10.1016/0038-1098(82)90130-2 ↗
66. NEXAFS investigations of transition metal oxides, nitrides, carbides, sulfides and other interstitial compounds10.1016/S0167-5729(97)00011-3 ↗
67. The interaction of N with Ti and the oxidation of TiN studied by soft x-ray absorption spectroscopy10.1016/0368-2048(93)80015-E ↗
68. Early stages of TiN thin film growth probed using in-situ soft X-ray absorption spectroscopy10.1063/1.4980541 ↗
69. A study of titanium nitride diffusion barriers between aluminium and silicon by X-ray absorption spectroscopy: the Si, Ti and N results10.1107/S0909049500018252 ↗
70. Titanium nitride as a seed layer for Heusler compounds10.1063/1.4938388 ↗