journal article·2020-02Open access

Influence of physical and microstructural features on soft magnetic properties of injection molded Fe–Si–P alloys at low frequencies

Da Seul Shin, Im Doo Jung, Joo Won Oh, Woo Seok Yang, Jun Sae Han, Min Woo Lee, Hwi Jun Kim, Seong Jin Park

Abstract

Abstract In this study, the effects of sintering temperature and the amount of Fe-17 at %P addition were studied for the Fe–Si–P sintered alloys. The Fe–Si–P sintered alloys were fabricated from the four powder admixtures containing Fe-3.5 wt% Si and Fe-17 at% P with powder injection molding. Better magnetic performances were obtained with Fe-17 at% P, which activated the liquid phase sintering and alloying of P and Si in the iron matrix. The higher density, lower oxides, and spheroidal grain were obtained with the increase of sintering temperature. Sintered density was the most important factor to the magnetic induction according to the comparative analysis of alloy composition and microstructural effects. For the permeability, coercivity, and core loss, on the other hand, they were much influenced by the alloy composition and microstructure, especially precipitation of secondary Fe3P phase, solid solution of P and Si in the iron matrix, population of the oxides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Hilzinger · 2013
2. Sintered soft magnetic materials. Properties and applications10.1016/S0304-8853(02)00934-4 ↗
3. Soft magnetic composite materials (SMCs)10.1016/j.jmatprotec.2007.02.034 ↗
4. High resistivity and low core loss of intergranular insulated Fe-6.5 wt.%Si/SiO2composite compacts10.1016/j.matdes.2015.10.087 ↗
5. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
6. Effect of Si addition on crystallization behavior, thermal ability and magnetic properties in high Fe content Fe-Si-B-P-Cu-C alloy10.1016/j.materresbull.2017.09.042 ↗
7. Preparation of high performance soft magnetic alloy Fe-4Si-0.8P by metal injection molding10.1016/j.apt.2017.07.021 ↗
8. Design and development of powder processed Fe-P based alloys10.1016/j.matdes.2011.02.046 ↗
9. Preparation of high performance sintered soft magnetic alloy by metal injection molding10.1016/j.matchemphys.2012.12.083 ↗
10. Influence of glass particles incorporation on the microstructure and magnetic properties of Fe-6.5wt% Si alloy subjected to metal injection molding technique10.1016/j.jallcom.2013.02.117 ↗
11. Preparation of Fe-Si-Ni soft magnetic composites with excellent high-frequency properties10.1016/j.jmmm.2014.12.073 ↗
12. Effects of Cu on microstructures, mechanical, and magnetic properties of Fe–Ni–P alloys fabricated by liquid phase sintering10.1002/adem.201700404 ↗
13. Preparation of soft magnetic alloys Fe100-x-ySixPy(0<x<9, 0<y<0.6 wt%), using solid phase diffusion-sintering method10.1016/j.jmmm.2004.04.101 ↗
14. Effect of Fe3P addition on magnetic properties and microstructure of injection molded iron10.1016/j.jmmm.2015.08.103 ↗
15. German · 1997
16. Investigation of core loss in PM micro-motor made using MIM technology10.1109/20.908930 ↗
17. Progress in magnetic microactuators10.1007/s005420050141 ↗
18. Sintering optimisation of Fe–Si soft magnetic materials processed by metal injection moulding10.1080/00325899.2017.1289631 ↗
19. Improvements in magnetic performance and sintered density of metal injection-molded soft magnetic alloy by hot isostatic pressing10.1016/j.matlet.2014.03.164 ↗
20. Influence of thermal debinding on the final properties of Fe-Si soft magnetic alloys for metal injection molding (MIM)10.1016/j.jmmm.2016.05.031 ↗
21. Study of soft magnetic iron cobalt based alloys processed by powder injection molding10.1016/j.jmmm.2008.02.178 ↗
22. Microstructural and core loss behaviors of addictive Fe-17 at% P based on Fe-3.5 wt% Si alloys in powder injection molding10.1016/j.jallcom.2018.03.321 ↗
23. Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept10.1007/BF02586168 ↗
24. Review: liquid phase sintering10.1007/s10853-008-3008-0 ↗
25. German · 1996
26. Microstructural study on effects of C-Alloying on Cu-Fe-P cast alloy10.1007/s12540-012-2019-1 ↗
27. Effect of Fe3P addition on magnetic properties and structure of sintered iron10.1179/pom.1980.23.4.210 ↗
28. Microstructures, mechanical properties, and fracture behaviors of metal-injection molded 17-4PH stainless steel10.1007/s12540-015-4369-y ↗
29. Surface chemical analysis of prealloyed water atomised steel powder10.1179/0032589005X37675 ↗
30. Correlation study between material parameters and mechanical properties of iron–carbon compacts using sensitivity analysis and regression model10.1007/s12540-019-00278-3 ↗
31. Recent advances and future directions in magnetic materials10.1016/j.actamat.2003.08.011 ↗
32. Influence of nanoprecipitates, solid solution and grain size on the magnetic and electrical properties of Fe-P-Si alloys10.1016/j.jmmm.2019.165743 ↗
33. Design and fabrication of Fe–Si–Al soft magnetic composites by controlling orientation of particles in a magnetic field: anisotropy of structures, electrical and magnetic properties10.1007/s10853-019-03470-3 ↗
34. Influence of temperature on the magnetic properties of nanostructured Fe-49 wt.% Co-2 wt.% V alloy powder synthesized by mechanically milling pre-alloyed gas-atomized powder10.1016/j.matchemphys.2019.01.044 ↗
35. Modified P/M soft magnetic materials for automotive applications
36. On the law of hysteresis10.1109/T-AIEE.1892.5570437 ↗
37. Physical origin of losses in conducting ferromagnetic materials (invited)10.1063/1.330306 ↗
38. Microstructural and magnetic properties study of Fe-P rolled sheet alloys10.1016/j.jmmm.2014.01.032 ↗
39. Structural defects in AFe2O4 (A = Zn, Mg) spinels10.1016/j.materresbull.2008.12.005 ↗
40. Structural, electrical and magnetic properties of NiLaxFe2-xO4 nanoferrites10.1016/j.matchemphys.2018.03.062 ↗
41. Barmak · 2014