Effect of hydrodynamic conditions on the Cu(In,Ga)Se2 thin film growth by electrodeposition
Source abstract
Abstract
Abstract In this paper, an experimental study about CIGS thin film growth due to hydrodynamic conditions variations on the working electrode surface is reported. Local hydrodynamic conditions were produced by the interaction of the natural convection flow with a non-conducting hemisphere placed on the working electrode surface. The electrodeposition process was made by a single bath with copper, indium, gallium and selenium ions to obtain CIGS thin films. The electrodes in the electrolytic cell were placed vertically. The as-electrodeposited CIGS thin film morphology near the hemisphere had a characteristic growth as a consequence of the local hydrodynamic conditions. CIGS thin film morphology and composition variations due to the wake and boundary layer were identified. With the CIGS film morphology obtained due to the presence of the wake was possible to represent the natural convection flow pattern on the Mo electrode surface. The CIGS thin film composition, inside and outside of the wake and throughout the boundary layer, was characterized. The gallium incorporation to the CIGS film was principally affected. As a consequence of this study, it was found that the atomic percentage of gallium in the CIGS film is related to deposition current density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. New world record efficiency for Cu(In,Ga)Se2 thin film solar cells beyond 20%10.1002/pip.1078 ↗
2. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
3. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
4. 19.9 % efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2 % fill factor10.1002/pip.822 ↗
5. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
6. Electrochemical study of one-step electrodeposition of copper–indium–gallium alloys in acidic conditions as precursor layers for Cu(In,Ga)Se2 thin film solar cells10.1016/j.electacta.2011.05.033 ↗
7. Insights into the properties of deep eutectic solvent based on reline for Ga-controllable CIGS solar cell in one-step electrodeposition10.1149/2.0611613jes ↗
8. Fabrication of Cu(In,Ga)Se2 thin film solar cell absorbers from electrodeposited bilayers10.1016/j.cap.2009.11.022 ↗
9. Optical and electrical characterization of CIGS thin films grown by electrodeposition route10.1016/j.ijleo.2016.01.115 ↗
10. CIGS-based solar cells prepared from electrodeposited stacked Cu/In/Ga layers10.1016/j.solmat.2013.01.028 ↗
11. Investigation of gallium redistribution processes during Cu(In,Ga)Se2 absorber formation from electrodeposited/annealed oxide precursor films10.1016/j.tsf.2014.09.017 ↗
12. Single-step electrodeposition of a microcrystalline Cu2ZnSnSe4 thin film with a kesterite structure10.1016/j.electacta.2012.10.076 ↗
13. Electrodeposition of CuGaSe2 and CuGaS2 thin films for photovoltaic applications10.1007/s10008-016-3237-0 ↗
14. Pandey · 1996
15. Role of convection in thin-layer electrodeposition10.1103/PhysRevE.51.3444 ↗
16. Applications of electrochemistry in the fabrication and characterization of thin-film solar cells
17. The concentration field during transient natural convection between vertical electrodes in a small-aspect-ratio cell10.1016/j.jelechem.2007.10.024 ↗
18. Transient natural convection induced by electrodeposition of Li+ ions onto a lithium metal vertical cathode in propylene carbonate10.1007/s10008-003-0447-z ↗
19. Numerical simulation of transient natural convection induced by electrochemical reactions confined between vertical plane Cu electrodes10.1016/j.electacta.2007.06.011 ↗
20. A computational approach for the simulation of natural convection in electrochemical cells10.1016/j.jcp.2012.08.043 ↗
21. Effect of flow dynamics on the growth kinetics of CdS thin films in chemical bath deposition10.1016/j.matchemphys.2012.01.093 ↗
22. Electrodeposition of CuIn1-xGaxSe2 precursor films: optimization of film composition and morphology10.1016/j.tsf.2004.02.104 ↗
23. Synthesis and characterization of one-step electrodeposited CuIn(1−x)GaxSe2/Mo/glass films at atmospheric conditions10.1016/j.solener.2010.12.025 ↗
24. Progress in electrodeposited absorber layer for CuIn(1−x)GaxSe2 (CIGS) solar cells10.1016/j.solener.2011.08.003 ↗
25. CuIn1-xGaxSe2-based photovoltaic cells from electrodeposited precursors films10.1016/S0927-0248(02)00285-4 ↗
26. Incorporation mechanism of indium and gallium during electrodeposition of Cu(in,Ga)Se210.1149/2.059112jes ↗
27. Chalcopyrite thin film solar cells by electrodeposition10.1016/j.solener.2004.05.024 ↗
28. Electrodeposition methods and chemistries for deposition of CIGS precursor thin films
29. Large eddy simulation of turbulent flow around a wall mounted hemisphere10.1016/j.apm.2014.11.055 ↗
30. Air flow aerodynamic on a wall mounted hemisphere for various turbulent boundary layers10.1016/j.expthermflusci.2009.11.007 ↗
31. Large area electrodeposition of Cu(In,Ga)Se210.1016/S0040-6090(99)00863-9 ↗
32. First stages of CuInSe2 electrodeposition from Cu(II)-In(III)-Se(IV) acidic solutions on polycrystalline Mo films10.1149/1.2815476 ↗