Electrically motivated atomic migration and defect formation in Bi0.5Sb1.5Te3 compounds
Source abstract
Abstract
Abstract Current-induced Ag migration behavior and defect formation mechanism in p-type Bi0.5Sb1.5Te3 (BST) compounds are investigated. By applying an electric current of 170 A/cm2 through a hot-pressed BST at 150 °C with one side attached to a thin Ag foil, Ag2Te secondary phases precipitate first in the BST and decompose subsequently after extended current stressing time. Ag elements migrate in BST toward the cathode side with a D⋅Z* product of 8 × 10−7 cm2/s, where D and Z* are diffusivity and electromigration effective charge number of Ag in BST, respectively. The van der Waals gap between two neighboring Te layers is identified to be the major path for Ag electromigration. Electrically motivated Ag atoms take Sb lattice sites eventually by forming AgSb acceptor defects in BST. The electrical resistivity of current-stressed BST was lowered by one order of magnitude as a result of greatly increased carrier concentration. The study demonstrates a route of adjusting electrical properties of BST compounds through the current-induced doping process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
2. Unique nanostructures and enhanced thermoelectric performance of melt-spun BiSbTe alloys10.1063/1.3097026 ↗
3. Thermoelectricity in semiconductor nanostructures10.1126/science.1093164 ↗
4. Point defect engineering of high-performance bismuth-telluride-based thermoelectric materials10.1002/adfm.201400474 ↗
5. Heat conduction in bismuth telluride10.1088/0370-1328/72/1/304 ↗
6. Thermoelectric properties of silver-doped n-type Bi2Te3–based material prepared by mechanical alloying and subsequent hot pressing10.1016/j.jallcom.2005.06.041 ↗
7. Thermoelectric properties of Cu-doped p-type pseudo-binary CuxBi0.5Sb1.5–xTe3 (x = 0.05 – 0.4) alloys prepared by spark plasma sintering10.1016/j.scriptamat.2006.04.012 ↗
8. Microstructures and thermoelectric properties of p-type pseudo-binary AgxBi0.5Sb1.5−xTe3 (x=0.05 – 0.4) alloys prepared by cold pressing10.1016/j.matlet.2006.03.080 ↗
9. Behavior of Ag admixtures in Sb2Te3 and Bi2Te3 single crystals10.1006/jssc.1998.7818 ↗
10. Dopant electromigration in semiconductors10.1002/adma.19970091104 ↗
11. Electromigration of copper in HgCdTe10.1149/1.2108531 ↗
12. Effect of dopants on the conductivity of electrodeposited CdTe10.1063/1.344980 ↗
13. Enhancement of thermoelectric properties of sputtered Bi–Sb–Te thin films by electric current stressing10.1063/1.2965487 ↗
14. Electrotransport in single-crystal bismuth telluride10.1139/p67-332 ↗
15. Diffusion and solid solubility of silver in single-crystal bismuth telluride10.1016/0022-3697(63)90153-7 ↗
16. Bismuth telluride compounds with high thermoelectric figures of merit10.1063/1.1525400 ↗
17. Investigation of the valence band structure of thermoelectric (Bi1−xSbx)2Te3 single crystals10.1002/pssb.2221500120 ↗
18. Electromigration in metals10.1088/0034-4885/52/3/002 ↗
19. Electromigration of Cu in V2VI3 compounds10.1002/pssa.2210670219 ↗
20. The nature of silver impurity atoms in antimony telluride10.1002/pssb.2221140104 ↗