Monte Carlo simulation to reveal the copper dissolution kinetics of an ion selective electrode based on copper sulfide
Source abstract
Abstract
The present work aims at studying copper dissolution of a Cu2+ ion-selective electrode based on a CuS thin film. The electrode is prepared using electrochemical deposition of CuS on a silicon substrate. The obtained film exhibits an apparent cohesive granular structure with an average grain size of about 33 μm, a small porosity content (<4%) and a thickness of about 7.48 μm. The Cu2+ electrochemical response shows a nearly Nernstian behavior in the range of pCu 6–1. The copper dissolution is experimentally studied in a wide pH range. In order to quantitatively predict copper mass dissolution, an original numerical model is developed based on Monte Carlo simulation. Our main hypothesis is based on dissolution probability that triggers the whole dissolution process through solution/electrode surface exchanges. Several probability forms are suggested accounting for the real observed electrochemical kinetics. The experimental results show that, under a low pH, the dissolution process severely leads to the consumption of large material. Moreover, our predictions suggest a dissolution profile as a two-stage process irrespective of pH. Our numerical model is able to fit correctly the observed kinetics considering an exponential probability form under all pH conditions. Highlights ► Modelling of a large number of microscopic dissolution events to explain the mass spectroscopy response. ► Assess to surface state dynamics to compare the predictions with observed using conventional techniques. ► Kinetics of dissolution evolves as long as the membrane is exposed to the solution. ► An exponential dissolution probability profile is predicted to match the experimental response. ► Numerical predictions suggest change in the dynamics of interface exchanges.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Analytical Chemistry and Sensors · Electrochemical Analysis and Applications · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Chalcogenide glass chemical sensors: research and analytical applications10.1016/0039-9140(94)00124-3 ↗
2. Cu-ion-selective membranes based on chalcogenide glasses10.1016/j.snb.2004.04.059 ↗
3. Electrochemical ion-selective sensors based on chalcogenide glasses10.1016/0250-6874(87)80041-0 ↗
4. Development of multisensor systems based on chalcogenide thin film chemical sensors for the simultaneous multicomponent analysis of metal ions in complex solutions10.1016/S0013-4686(01)00563-1 ↗
5. New solid-state ion-selective electrodes—sensors for chemical analysis of solutions10.1007/BF00482399 ↗
6. Static recrystallization of FeAl in the presence of second phase particles: experimental and modeling investigations
7. Optical properties of CuS thin films deposited by chemical bath deposition technique and their applications10.3923/tasr.2006.467.476 ↗
8. Optical and electrical properties of copper sulfide films of variable composition10.1006/jssc.1995.1070 ↗
9. Analytical applications of chalcogenide glass chemical sensors in environmental monitoring and process control10.1016/0925-4005(95)85067-8 ↗
10. Holographic recording in amorphous chalcogenide thin films10.1016/S1359-0286(03)00042-1 ↗
11. Semiconductor thin films by chemical bath deposition for solar energy related applications10.1016/S0927-0248(97)00237-7 ↗
12. Selectrode®—the universal ion-selective solid-state electrode: part II. Comparison of copper(II) electrodes in metal buffers and compleximetric titrations10.1016/0003-2670(72)80010-2 ↗
13. The surface morphology of ion-selective membrane electrodes: part 2. Studies on the copper (II)-selective electrode10.1016/S0003-2670(01)84258-6 ↗
14. Diffusion-layer model for copper solid-state chalcocite membrane electrode; sensitivity to copper(II) ions10.1016/0039-9140(76)80220-2 ↗
15. The adsorption of copper ions on the surface of copper(ii) sulphide precipitate-based ion-selective electrodes10.1016/S0003-2670(00)84906-5 ↗
16. Copper ion-selective chalcogenide glass electrodes: analytical characteristics and sensing mechanism10.1016/0003-2670(86)80041-1 ↗
17. Copper sulfides obtained by spray pyrolysis—possible absorbers in solid-state solar cells10.1016/j.tsf.2006.12.073 ↗
18. A new heterogeneous solid-state copper(II)-selective electrode10.1016/S0003-2670(01)95049-4 ↗
19. Thin layer copper ISE for fluidic microsystem10.1016/S0925-4005(03)00060-1 ↗
20. Screen-printed copper ion-selective electrodes10.1007/s002160000408 ↗
21. Effect of dissolved oxygen on the response of Cu(II) ion-selective electrodes in metal buffer solutions10.1016/S0003-2670(99)00329-3 ↗
22. Release of copper from commercial solid-state copper ion-selective electrodes10.1016/0039-9140(92)80201-N ↗
23. 1981 · vol. 82
24. Studies of copper(II) sulphide ion-selective electrodes10.1016/0039-9140(72)80235-2 ↗
25. Experimental evidence for the surface change of solid state copper ion-selective electrodes in chloride medium10.1007/BF01201837 ↗
26. Effect of applied current on copper sulphide-based ion-selective electrodes10.1016/S0003-2670(00)83771-X ↗
27. Monte Carlo simulation of uniform corrosion process under potentiostatic conditions10.1016/j.corsci.2006.10.041 ↗
28. Controllable synthesis, optical and photocatalytic properties of CuS nanomaterials with hierarchical structures10.1016/j.powtec.2009.11.018 ↗
29. Preparation and characterization of CuS hollow spheres10.1016/j.ceramint.2008.02.003 ↗
30. Synthesis of CuS and Cu(1.1)Fe(1.1)S(2) crystals and their electrochemical properties10.1016/j.matchar.2011.01.001 ↗
31. Photochemical synthesis of copper sulphide/titanium oxide photocatalyst10.1016/j.jphotochem.2011.04.018 ↗
32. Electrosynthesis and electrochemical characterization of a thin phase of CuxS (x→2) on ITO electrode10.1021/la025711k ↗
33. Dissolution kinetics of copper, white metal and natural chalcocite in Cl2/Cl-media10.1016/S0304-386X(98)00085-1 ↗
34. A kinetic model of the dissolution of copper (II) oxide in EDTA solutions considering the coupling of metal and oxide ion transfer10.1016/S0010-938X(00)00171-2 ↗
35. Application of ferric chloride both as oxidant and complexant to enhance the dissolution of metallic copper10.1016/j.hydromet.2010.07.013 ↗