journal article·2015-02

Fabrication of anisotropic microparticles by laser ablation and laser heating

Kozue Fukuda, Takeshi Higuchi, Tadahiro Aita

Publisher page

Abstract

Abstract Laser ablation and laser heating were used as micro-cutting and micro-bonding tools for fabrication of anisotropic microparticles. By using the techniques, two kinds of anisotropic microparticles to which a polymer film or magnetic particles was attached on their one hemisphere were fabricated from transparent spherical acrylic polymer particles of about 10 μm. In the fabrication of the anisotropic particles to which a polymer film attached, a mono-particle layer of the acrylic polymer particles formed on water surface was transferred on to a target plate coated with a polymer film and the plate was heated so that the particles strongly adhered to the polymer film. The plate was irradiated by 1064 nm or 532 nm pulse light from a Q-switched YAG laser to cause the ablation of the target. The ablation blew off the polymer film together with the acrylic polymer particles from the target plate, which gave the anisotropic particles. Anisotropic particles to which magnetic particles attached on their one hemisphere were fabricated by laser heating. A magnetic particle layer formed on water surface was transferred onto a quartz plate and then the monoparticle layer of the acrylic polymer particles was transferred onto the magnetic particle layer. The magnetic particles were heated by irradiation of 808 nm light from a CW diode laser, which caused the adhesion of the magnetic particles to the polymer particles. Rotation of the obtained magnetically anisotropic particles under rotating magnetic field was demonstrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pickering emulsions and particle stabilization · Electrohydrodynamics and Fluid Dynamics · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Synthesis of face-centered tetragonal FePt nanoparticles and granular films from Pt@Fe2O3 core-shell nanoparticles10.1021/ja0376700 ↗
2. Biocompartible heterostructured nanoparticles for multimodal biological detection10.1021/ja066547g ↗
3. One-pot synthesis and characterization of size-controlled biomagnetic FePt-iron oxide heterodimer nanocrystals10.1021/ja078034v ↗
4. Dumbbell-like Au-Fe3O4 nanoparticles for target-specific platin delivery10.1021/ja900790v ↗
5. Au-Fe3O4 dumbbell nanoparticles as dual-functional probes10.1002/anie.200704392 ↗
6. Janus particle synthesis and assembly10.1002/adma.200904094 ↗
7. Facile one-pot synthesis and morphological control of asymmetric superparamagnetic composite nanoparticles10.1021/la200749w ↗
8. Synthesis, properties and application of Janus nanoparticles10.1016/j.nantod.2011.04.008 ↗
9. Nanoacorns: anisotropically phase-segregated CoPd sulfide nanoparticles10.1021/ja047606y ↗
10. Dumbbell-like bifunctional Au-Fe3O4 nanoparticles10.1021/nl047955q ↗
11. One-pot synthesis of copper-indium sulfide nanocrystal heterostructures with acorn, bottle, and larva shapes10.1021/ja0577342 ↗
12. Seeded growth of highly luminescent CdSe/CdS nanoheterostructures with rod and tetrapod morphologies10.1021/nl072003g ↗
13. Ag-Au-Ag heterometallic nanorods formed through directed anisotropic grown10.1021/ja711093j ↗
14. Synthesis and structure–specific functions of patchy nanoparticles10.1246/cl.2009.194 ↗
15. Synthesis of Janus composite particles by the template of dumbbell-like silica/polystyrene10.1016/j.matchemphys.2011.03.009 ↗
16. Heterodimers based on CoPt3-Au nanocrystals with tunable domain size10.1021/ja0607741 ↗
17. Anisotropically phase-segregated Pd-Co-Pd sulfide nanoparticles formed by fusing two Co-Pd sulfide nanoparticles10.1002/anie.200603865 ↗
18. Synthesis and characterization of bimagnetic bricklike nanoparticles10.1021/cm7028068 ↗
19. Conversion of anisotropically phase-segregated Pd/γ-Fe2O3 nanoparticles into exchange-coupled fct-FePd/-Fe nanocomposite magnets10.1021/ja077921v ↗
20. Facile one-pot synthesis of bifunctional heterodimers of nanoparticles: a conjugate of quantum dot and magnetic nanoparticles10.1021/ja0496423 ↗
21. γ-Fe2O3/II-VI sulfide nanocrystal heterojunctions10.1021/ja051713q ↗
22. Colloidal strategies for preparing oxide-based hybrid nanocrystals10.1002/ejic.200701047 ↗
23. Controlled assembly of eccentrically encapsulated gold nanoparticles10.1021/ja8040288 ↗
24. A facile synthesis of asymmetric hybrid colloidal particles10.1021/ja8079934 ↗
25. Sonochemical synthesis of magnetic Janus nanoparticles10.1021/la104284v ↗
26. Facile method for large scale synthesis of magnetic inorganic-organic hybrid anisotropic Janus particles10.1016/j.jcis.2012.06.032 ↗
27. Janus nanoparticles by interfacial engineering10.1002/adfm.200601034 ↗
28. Preparation and controlled self-assembly of Janus magnetic nanoparticles10.1021/ja0740521 ↗
29. Amphiphilic Janus gold nanoparticles via combining “Solid-state grafting-to” and “Grafting-from” methods10.1021/ja804192e ↗
30. Effect of colloidal stabilizer on the shape of polystyrene/poly(methyl methacrylate) composite particles prepared in aqueous medium by the solvent evaporation method10.1021/la061298v ↗
31. Janus supraparticles by induced phase separation of nanoparticles in droplet10.1002/adma.200803115 ↗
32. Janus and ternary particles generated by microfluidic synthesis: design, synthesis, and self-assembly10.1021/ja060882n ↗
33. Synthesis of monodisperse bicolored Janus particles with electrical anisotropy using a microfluidic co-flow system10.1002/adma.200502431 ↗
34. Generation of monodisperse inorganic-organic Janus microspheres in a microfluidic device10.1002/adfm.200801181 ↗
35. Gradient sensitive microscopic probes prepared by gold evaporation and chemisorption on latex spheres10.1021/la9621067 ↗
36. Supraparticles and “Janus” particles fabricated by replication of particle monolayers at liquid surfaces using a gel trapping technique10.1002/adma.200306476 ↗
37. Janus particles with a functional gold surface for control of surface plasmon resonance10.1007/s00396-006-1524-5 ↗
38. Influence of particle surface roughness on the behaviour of Janus particles at interfaces10.1016/j.colsurfa.2007.11.004 ↗
39. A snowman-like array of colloidal dimers for antireflecting surfaces10.1002/adma.200305617 ↗
40. “Smart” surface dissymmetrization of microparticles driven by laser photochemical deposition10.1021/la0261085 ↗
41. Dielectrophoretic assembly of metallodielectric Janus particles in AC electric Fields10.1021/la8015222 ↗
42. Chiral colloidal clusters10.1038/nature07237 ↗
43. Microrheology with modulated optical nanoprobes (MOONs)10.1016/j.jmmm.2005.02.072 ↗
44. Multifunctional superparamagnetic Janus particles10.1021/la903348s ↗
45. A polymerization-powered motor10.1002/anie.201103565 ↗
46. Hydrodynamic simulation of silicon ablation by ultrashort laser irradiation10.1016/j.nimb.2011.12.027 ↗
47. Study on the ablation threshold induced by pulsed lasers at different wavelength10.1016/j.nimb.2006.12.144 ↗
48. The effect of AlBr3 additives on the thermal degradation of PMMA. A study using TG-DTA-DTG, IR and PY-GC-MS techniques10.1007/s10973-009-0063-y ↗