journal article·2021-04

Effect of 20 mol% Al addition on phase formation and mechanical properties of TaCx (x=0.5, 0.55, 0.6 and 0.7) ceramics

Faqiang Shi, Limeng Liu, Jiandong Wu, Junfeng Hou, Yujin Wang

Publisher page

Abstract

Abstract TaCx (x = 0.5, 0.55, 0.6 and 0.7) ceramics with 20 mol% Al addition were prepared by hot pressing TaC, Ta and Al powder mixtures. Effects of the overall C:Ta ratios and the Al addition on constituent phases, microstructures and mechanical properties of the consolidated materials were examined. Results showed that O impurity contained in the starting powders was collected in form of Al2O3 due to strong affinity of O with Al. The TaCx-Al composites were easy to densify due to presence of molten Al at its melting point (Tm = 660 °C) and a transient Al–Ta eutectic liquid at higher temperatures. After densification, the metallic liquids were eliminated ultimately by formation of refractory Ta4AlC3 via reaction of Al, Ta and TaC. Reactions between the remnant Ta and TaC after Ta4AlC3 formation resulted in ζ-Ta4C3-z or h-Ta2C depending on the initial C:Ta ratio. The Ta4AlC3 compound was compatible with the tantalum carbides. Microstructures of the TaCx-Al (x = 0.5–0.7) composites were consisted of ζ-Ta4C3-z and Ta4AlC3 fine lamellar grains to benefit the mechanical properties of the composites. The TaC0.7–20mol% Al composition had satisfying mechanical properties (flexural strength 613 ± 28 MPa and fracture toughness 11.2 ± 0.8 MPa m1/2). TG-DSC evidenced an increase in oxidation resistance of the TaCx ceramics by the addition of 20 mol% Al.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Ultra-high temperature deformation in TaC and HfC10.1016/j.jeurceramsoc.2018.07.017 ↗
2. Ablation tests on HfC- and TaC-based ceramics for aeropropulsive applications10.1016/j.jeurceramsoc.2014.11.018 ↗
3. Promising ultra-high-temperature ceramic materials for aerospace applications10.1134/S0036023613140039 ↗
4. Compositional dependence of optical properties of zirconium, hafnium and tantalum carbides for solar absorber applications10.1016/j.solener.2016.02.045 ↗
5. Densifification kinetics and mechanical properties of tantalum carbide10.1016/j.ijrmhm.2018.02.013 ↗
6. Phase constitution and mechanical properties of carbides in the Ta-C system10.1111/j.1551-2916.2009.03201.x ↗
7. Atomic-vacancy ordering in the carbide phase ζ-Ta4C3-x10.1134/S1063783406090034 ↗
8. Stacking behavior of the close-packed Ta-atom planes and its effects on formation of “hybrid grains” in TaC0.66-0.7 ceramics10.1016/j.ceramint.2020.04.244 ↗
9. ζ-Ta4C3-x: a high fracture toughness carbide with rising-crack-growth resistance (R-curve) behavior10.1111/jace.13635 ↗
10. Microstructure and mechanical properties of spark plasma sintered TaC0.7 Ceramics10.1111/j.1551-2916.2010.03908.x ↗
11. Experimental investigation into the crack propagation in multiphase tantalum carbide ceramics10.1016/j.msea.2017.04.043 ↗
12. A computational search for the zeta phase in the tantalum carbides10.1111/jace.15970 ↗
13. Processing of dense ζ-Ta4C3-x by reaction sintering of Ta and TaC powder mixture10.1111/jace.13254 ↗
14. A functionally graded carbide in the Ta-C system10.1111/jace.14045 ↗
15. Microstructural formations and phase transformation pathways in hot isostatically pressed tantalum carbides10.1016/j.actamat.2011.09.036 ↗
16. Controlling ζ-Ta4C3-x laminate growth in TaC0.6 ceramic by addition of Cu and its effect on mechanical properties10.1016/j.matchemphys.2018.12.093 ↗
17. ζ-Ta4C3 lamellae growth behavior and its effects on microstructure and fracture toughness of TaC0.6-Cu composites10.1016/j.jallcom.2019.153175 ↗
18. Microstructure and mechanical properties of the spark plasma sintered Ta2C ceramics10.1016/j.ceramint.2012.02.055 ↗
19. Solid state reaction between tantalum (Ta) and tantalum carbide (TaC) powders during HIPing10.4028/www.scientific.net/KEM.132-136.868 ↗
20. Carbide phases of tantalum (the system tantalum- tantalum carbide)
21. Isolation of the zeta phase in the system tantalum- carbon10.1111/j.1151-2916.1967.tb15055.x ↗
22. Observations on zeta phase in the system Ta-C10.1111/j.1151-2916.1966.tb13223.x ↗
23. On the crystal chemistry of the close-packed transition- metal carbides. I. The crystal structure of the ζ-V, Nb and Ta carbides10.1107/S0567740870002091 ↗
24. Structure of non-stoichiometric TaC10.1016/0025-5416(75)90174-3 ↗
25. Ordering in the ζ-Ta4C3- x carbide phase10.1134/1.2130914 ↗
26. Stacking faults in a non-stoichiometric face-centred cubic TaC10.1002/pssb.19670220202 ↗
27. G. Santoro, H. B. Probst, An explanation of microstructures in the tantalum-carbon system, in Proceedings of the Twelfth Annual Conference on Applications of X-Ray Analysis, August 7-9,1963. Advances in X-Ray Analysis, V7, Edited by W.M. Maeller, G. Mallett, M. Fay.10.1154/S0376030800002469 ↗
28. Dislocation mechanisms for the nucleation of transformations in vanadium carbide10.1080/14786437108227383 ↗
29. Slip in titanium carbide10.1002/pssb.19660140132 ↗
30. MAX phases: bridging the gap between metals and ceramics
31. Ta-based 413 and 211 MAX phase solid solutions with Hf and Nb10.1016/j.jeurceramsoc.2019.12.052 ↗
32. Ta4AlC3: phase determination, polymorphism and deformation10.1016/j.actamat.2007.04.040 ↗
33. Elastic properties of Ta4AlC3 studied by first-principles calculations10.1016/j.ssc.2008.06.007 ↗
34. Elasticity and thermodynamic properties of α-Ta4AlC3 under pressure10.1016/j.jallcom.2009.09.035 ↗
35. High-temperature stability of α-Ta4AlC310.1016/j.materresbull.2011.03.005 ↗
36. Synthesis, properties and thermal decomposition of the Ta4AlC3 MAX phase10.1016/j.jeurceramsoc.2019.04.021 ↗
37. Microstructures and theoretical bulk modulus of layered ternary tantalum aluminum carbides10.1111/j.1551-2916.2006.01303.x ↗
38. Effects of 20 mol% Fe, Co, Ni additions on phase formation, microstructure and mechanical properties of TaCx (x = 0.5, 0.55, 0.6, 0.7) ceramics10.1016/j.ijrmhm.2020.105436 ↗
39. Reactive spark plasma sintering of Ti3SnC2, Zr3SnC2 and Hf3SnC2 using Fe, Co or Ni additives10.1016/j.jeurceramsoc.2017.06.041 ↗
40. 2016
41. Polished notch modification fracture toughness testing of SENB-S10.1016/S0955-2219(97)00024-1 ↗
42. Stikkelman · 2016
43. Effects of Al addition on densification, microstructure and mechanical properties of TaC-Al ceramics10.1016/j.jallcom.2018.06.332 ↗
44. Critical evaluation of the aluminium-tantalum-titanium system10.1016/j.calphad.2008.07.005 ↗
45. Atomic and vacancy ordering in carbide ζ-Ta4C3-x (0.28≤x≤0.40) and phase equilibria in the Ta-C system10.1016/j.jssc.2007.09.015 ↗
46. Hot pressing of tantalum carbide with and without sintering additives10.1111/j.1551-2916.2006.01416.x ↗
47. Physical and mechanical properties of bulk Ta4AlC3 ceramic prepared by an in situ reaction synthesis/hot-pressing method10.1111/j.1551-2916.2007.01804.x ↗
48. A theoretical investigation of the slip systems of Ta2C10.1016/j.actamat.2013.01.047 ↗
49. Microstructural design of toughened ceramics10.1111/j.1151-2916.1991.tb06872.x ↗
50. Thermo-mechanical testing of tantalum carbides using a Lorentz-force, non-contact technique10.1016/j.jeurceramsoc.2013.02.005 ↗
51. Densifification, mechanical properties, and oxidation resistance of TaC-TaB2 ceramics10.1111/j.1551-2916.2008.02780.x ↗
52. Processing, mechanical properties and oxidation behavior of TaC and HfC composites containing 15 vol% TaSi2 or MoSi210.1557/jmr.2009.0232 ↗
53. Comparison of the oxidation behaviour of two dense hot isostatically pressed tantalum carbide (TaC and Ta2C) materials10.1016/S0955-2219(96)00235-X ↗
54. Effects of Al addition on densifification, microstructure and mechanical properties of TaC-Al ceramics10.1016/j.jallcom.2018.06.332 ↗
55. Effffects of Al2O3 content on densifification, microstructure, mechanical properties and oxidation resistance of TaC-Al2O3 composites10.1016/j.ijrmhm.2018.10.012 ↗