Influence of SiO2-adding on microstructure and dielectric properties of (In0.5Nb0.5)0.05Ti0.95O2 ceramics
Source abstract
Abstract
Abstract (In0.5Nb0.5)xTi1-xO12 (INTO) ceramics exhibit the unusual dielectric properties of giant dielectric constant and good stabilities, but their low-frequency dielectric loss is relatively large, and the sintering temperature is too high, which are very disadvantageous for practical applications. According to internal barrier layer capacitance effect, which seems to be the most plausible mechanism of the unusual dielectric properties, constructing insulating phase boundaries in INTO ceramics is an effective way to reduce their low-frequency dielectric loss. In this paper, SiO2 was added to INTO ceramics, because, on the one hand, the insulating phase boundaries could be constructed by SiO2, on the other hand, SiO2 could play the role of sintering agent to reduce the sintering temperature. Therefore, the SiO2/INTO ceramics were prepared by solid-state reaction, and their crystalline structures, microstructures, and electrical properties were analyzed. Compared to previous reports, the low-frequency dielectric loss of SiO2/INTO ceramics after annealing, which were sintered at a lower temperature of 1300 °C for a shorter time of 5 h, decreases substantially. The reason was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Electron-pinned defect-dipoles for high-performance colossal permittivity materials10.1038/nmat3691 ↗
2. Colossal permittivity with ultralow dielectric loss in in + Ta co-doped rutile TiO210.1039/C6TA08337D ↗
3. Surface barrier layer effect in (In + Nb) co-doped TiO2 ceramics: an alternative route to design low dielectric loss10.1111/jace.14688 ↗
4. The effect of segregation structure on the colossal permittivity properties of (La0.5Nb0.5)xTi1-xO2 ceramics10.1039/C7TC05277D ↗
5. Colossal permittivity materials as superior dielectrics for diverse applications10.1002/adfm.201808118 ↗
6. Microstructure and dielectric properties of (Nb + In) co-doped rutile TiO2 ceramics
7. Huge low-frequency dielectric response of (Nb,In)-doped TiO2 ceramics10.1063/1.4938124 ↗
8. Evidences of grain boundary capacitance effect on the colossal dielectric permittivity in (Nb + In) co-doped TiO2 ceramics10.1038/srep08295 ↗
9. Nonlinear I-V behavior in colossal permittivity ceramic: (Nb + In) co-doped rutile TiO210.1016/j.ceramint.2015.03.156 ↗
10. Origin of colossal dielectric permittivity of rutile Ti0.9In0.05Nb0.05O2: single crystal and polycrystalline10.1038/srep21478 ↗
11. Preparation, characterization, electrical properties and giant dielectric response in (In + Nb) co-doped TiO2 ceramics synthesized by a urea chemical-combustion method10.1007/s10854-017-6871-0 ↗
12. Origin of the colossal permittivity of (Nb + In) co-doped rutile ceramics by wide-range dielectric spectroscopy10.1080/01411594.2018.1501801 ↗
13. Wide range dielectric and infrared spectroscopy of (Nb + In) co-doped rutile ceramics
14. Low-temperature Maxwell-Wagner relaxation in (Na + Nb) co-doped rutile TiO2 colossal permittivity ceramics10.1111/jace.16883 ↗
15. Stable high dielectric properties in (Cr, Nb) co-doped SnO2 ceramics10.1016/j.matchemphys.2020.122843 ↗
16. Microstructure and dielectrical properties of CaCu3Ti4O12/TiO2 composite ceramics with core-shell structure10.1016/j.jallcom.2018.01.080 ↗
17. Influence of MgTiO3-doping on microstructure and dielectric properties of CaCu3Ti4O12 ceramics10.1007/s11664-018-6450-z ↗
18. Microstructure and dielectric property of flash sintered SiO2-coated BaTiO3 ceramics10.1016/j.scriptamat.2019.05.019 ↗
19. Surface barrier layer effect in (In + Nb) co-doped TiO2 ceramics: an alternative route to design low dielectric loss10.1111/jace.14688 ↗
20. Origin of giant permittivity in Ta, Al co-doped TiO2: surface layer and internal barrier capacitance layer effects10.1016/j.ceramint.2017.12.237 ↗
21. Surface layer characterizations and sintering time effect on electrical and giant dielectric properties of (In0.05Nb0.05)Ti0.9O2 ceramics10.1016/j.ceramint.2018.01.174 ↗