journal article·2018-12

Evolution of nano-porous structure of aluminium-magnesium alloy during multi-axial tensile deformation: Estimation of stress-strain response and dimension-less aspect ratio

Sunil Kumar

Publisher page

Abstract

Abstract The investigation of mechanical properties and evolution of nano-porous structure in metallic materials under the complex multi-axial tensile deformation condition have many applications for the design of engineering metallic structures for automobile, aerospace, electronic instruments, etc. In order to understand the stress-strain response and growth-coalescence of nano-pores in aluminium-magnesium (Al+10atom%Mg) alloy during multi-axial tensile deformation, classical Molecular Dynamics (MD) simulations were performed. Stress-strain response of aluminium-magnesium alloy exhibit brittle failure during tri-axial tensile deformation. Evolutions of nano-pores have been observed in early stage of plastic deformation of aluminium-magnesium alloy. The Solvent Accessible Surface Area ( S A S A ) and volume of nano-pores ( V − V s ) have evaluated for estimation of dimensionless aspect ratio ( κ ) of nano-porous structure of aluminium-magnesium alloy. Our findings will give more insights for better design of nano-porous materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Dynamic continuous recrystallization characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet10.1016/S0921-5093(02)00096-5 ↗
2. A study by transmission electron microscopy of the tensile and fatigue deformation of aluminum-magnesium alloys10.1016/0001-6160(65)90081-7 ↗
3. Review of warm forming of aluminum–magnesium alloys10.1016/j.jmatprotec.2008.03.057 ↗
4. Graphene engendered aluminium crystal growth and mechanical properties of its composite: an atomistic investigation10.1016/j.matchemphys.2018.01.013 ↗
5. Effect of organization of semi-flexible polymers on mechanical properties of its composite with single wall carbon nanotubes10.1016/j.compscitech.2016.09.003 ↗
6. Deep drawability of type 5083 aluminium–magnesium alloy sheet under various conditions of temperature and forming speed10.1016/S0924-0136(99)00057-6 ↗
7. Fabrication of Al-based bulk metallic glass by mechanical alloying and vacuum hot consolidation10.1016/j.jallcom.2010.04.069 ↗
8. Tensile deformation behavior of aluminum alloys at warm forming temperatures10.1016/S0921-5093(02)00915-2 ↗
9. Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications10.1016/j.actamat.2012.10.044 ↗
10. Amorphous metallic foam10.1063/1.1537514 ↗
11. Numerical study of confined slot jet impinging on porous metallic foam heat sink10.1016/j.ijheatmasstransfer.2005.06.032 ↗
12. Recent results on 3D characterisation of microstructure and damage of metal matrix composites and a metallic foam using X-ray tomography10.1016/S0921-5093(01)00924-8 ↗
13. Nanoporous gold as a platform for a building block catalyst10.1021/cs300231u ↗
14. Nanoporous metal foams10.1002/anie.200902994 ↗
15. Gold catalysts: nanoporous gold foams10.1002/anie.200602484 ↗
16. Small but strong: a review of the mechanical properties of carbon nanotube–polymer composites10.1016/j.carbon.2006.02.038 ↗
17. Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites10.1016/j.commatsci.2006.06.011 ↗
18. Load transfer of graphene/carbon nanotube/polyethylene hybrid nanocomposite by molecular dynamics simulation10.1016/j.compositesb.2014.03.009 ↗
19. Plastic deformation of semicrystalline polyethylene under extension, compression, and shear using molecular dynamics simulation10.1021/ma402297a ↗
20. Investigation of crack tip dislocation emission in aluminum using multiscale molecular dynamics simulation and continuum modeling10.1016/j.jmps.2013.12.009 ↗
21. Compressive behavior of CNT-reinforced aluminum composites using molecular dynamics10.1016/j.compscitech.2013.09.027 ↗
22. A comprehensive analysis of mechanical characteristics of carbon nanotube-metal matrix nanocomposites10.1016/j.msea.2017.06.066 ↗
23. Mechanical characteristics of CNT-reinforced metallic glass nanocomposites by molecular dynamics simulations10.1016/j.commatsci.2016.03.036 ↗
24. Molecular dynamics simulations of orientation effects during tension, compression, and bending deformations of magnesium nanocrystals10.1115/1.4030930 ↗
25. Nanovoid failure in Magnesium under dynamic loads10.1016/j.actamat.2017.05.016 ↗
26. The art of molecular dynamics simulation10.1063/1.4822471 ↗
27. Allen · 1989
28. Constant temperature molecular dynamics methods10.1143/PTPS.103.1 ↗
29. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
30. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool10.1088/0965-0393/18/1/015012 ↗
31. Development of interatomic potentials appropriate for simulation of solid–liquid interface properties in Al–Mg alloys
32. Computer experiments on classical fluids. I. Thermodynamical properties of Lennard-Jones molecules10.1103/PhysRev.159.98 ↗
33. The nose–hoover thermostat10.1063/1.449071 ↗
34. An improved symplectic integrator for Nosé-Poincaré thermostat10.1143/JPSJ.70.75 ↗
35. Constant-temperature molecular dynamics10.1088/0953-8984/2/S/013 ↗
36. Late stages of high rate tension of aluminum melt: molecular dynamic simulation10.1063/1.4959819 ↗
37. Densities of solid aluminum-magnesium (Al-Mg) alloys10.1361/105497100770340228 ↗
38. Size effect on atomic structure in low-dimensional Cu-Zr amorphous systems
39. Diffusion in metallic glasses and supercooled melts10.1103/RevModPhys.75.237 ↗
40. Hardening of shear band in metallic glass