Effect of Ni layer on the microstructure evolution and mechanical property of Cu-based bearing shell with aging treatment
Source abstract
Abstract
Abstract Cu-based bearing shell containing Ni layer was prepared by centrifugal casting. The effect of Ni layer on the microstructure evolution and mechanical property of Cu-based bearing shell with aging treatment was studied. The microstructure of the Sn-Sb-Cu alloy (ZChSnSbCu8-4) without aging is consisted of Sn-based solid solution and Cu6Sn5 phases which distributed uniformly in the matrix. After aging treatment, the grain boundary segregation is slowly disappeared, and the matrix transforms into a more uniform Sn-based solid solution. The Ni layer hinders the diffusion of Cu and Sn atoms at the interface, and suppresses the volume fraction increment of Cu6Sn5 phase during aging. The Cu6Sn5 phases are gradually coarsened during aging. The average bonding strength of Cu-based bearing shell with Ni layer is 70.3 MPa. After aging at 175 °C with 500 h, the bond strength is still higher than 50 MPa, which is greater than the specimen without Ni layer. The hardness of Cu matrix, Ni layer and Sn-Sb-Cu alloy decreases with increasing aging time. While the hardness of the region near the Ni/Sn-Sb-Cu interface increases from 47.5Hv to 88.4Hv during aging. The fracture surface of the samples after aging treatment is changed from intergranular/transgranular fracture mode to intergranular fracture mode. The change of the fracture mode is related to the coarsening and growth of Cu6Sn5 phases near the interface between Ni layer and Sn-Sb-Cu matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Electronic Packaging and Soldering Technologies · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Pouring Technology of babbitt axle bush
2. Centrifugal casting for ZG120Mn13 bushing
3. Diffusion bonding of ZChSnSb11-6/20 steel bimetal composite material
4. Creep mechanical properties of babbitt SnSb11Cu6
5. Copper effects in mechanical properties of rapidly solidified Sn–Pb–Sb Babbitt bearing alloys10.1016/j.msea.2011.09.092 ↗
6. Optimization of centrifugal pouring technique for babbitt layer on marine diesel engine bearing shell
7. Centrifugal casing large Al bronze bush
8. Influence of creep on mechanical properties and microstructure of Babbitt alloy ZChSnSb11-6
9. Tribological properties of Tin-based Babbitt bearing alloy with polyurethane coating under dry and starved lubrication conditions10.1016/j.triboint.2015.03.032 ↗
10. Effect of one-step cold deformation on microstructure and properties of copper bearing bush
11. Effects of melt state on solidification microstructure and tribological properties of B83 babbitt alloy
12. Phase field simulation on microstructure evolution and Growth Kinetics of Cu6Sn5 intermetallics compound during early interfacial reaction in Sn/Cu soldering system
13. Effect of the heat treatment on the microstructure and properties of tin babbitt10.4149/km_2013_2_101 ↗
14. Nucleation, grain orientations, and microstructure of Sn-3Ag-0.5Cu soldered on cobalt substrates10.1016/j.jallcom.2017.02.243 ↗
15. Effect of type of thermo-mechanical excursion on growth of interfacial intermetallic compounds in Cu/Sn-Ag-Cu solder joints10.1016/j.microrel.2017.05.011 ↗
16. Ni as diffusion barriers between eutectic Sn-Ag solder and Cu
17. Effects of Sn thickness on morphology and evolution of Ni3Sn4 grains formed between molten Sn and Ni substrate10.1016/j.intermet.2015.02.002 ↗
18. The influence of ageing on the stabilisation of interfacial (Cu,Ni)6(Sn,Zn)5 and (Cu,Au,Ni)6Sn5 intermetallics in Pb-free Ball Grid Array (BGA) solder joints10.1016/j.jallcom.2016.05.263 ↗
19. Intermetallic compound layer growth at the interface between Sn–Cu–Ni solder and Cu substrate10.1016/j.jallcom.2004.03.076 ↗
20. Effect of nickel layer on microstructure formation and mechanical property of aging treated copper-based bearing
21. MCM-41 support for ultrasmall γ-Fe2O3 nanoparticles for H2S removal10.1039/C7TA03652C ↗
22. Hybrid nanostructures based on titanium dioxide for enhanced photocatalysis10.1016/j.apcata.2014.10.001 ↗
23. Carbon functionalized TiO2 nanofibers for high efficiency photocatalysis10.1088/2053-1591/1/1/015012 ↗
24. Facile fabrication and photocatalytic application of Ag nanoparticles-TiO2 nanofiber composites10.1166/jnn.2011.3805 ↗
25. Graphite oxides as effective fire retardants of epoxy resin10.1007/s13233-011-0106-7 ↗
26. A new one-step synthesis method for coating multi-walled carbon nanotubes with cuprous oxide nanoparticles10.1016/j.scriptamat.2008.01.047 ↗
27. Self-assembly approach for the synthesis of electro-magnetic functionalized Fe3O4/polyaniline nanocomposites: effect of dopant on the properties10.1016/j.colsurfa.2007.12.057 ↗
28. Self-assembly directed synthesis of poly(ortho-toluidine)-metal(gold and palladium) composite nanospheres10.1166/jnn.2007.692 ↗
29. Analysis of heavy metal toxic ions by adsorption onto amino-functionalized ordered mesoporous silica10.5012/bkcs.2007.28.11.1985 ↗
30. Zhang · 2007 · vol. 104 · 2743
31. Synthesis of metal (Fe or Pd)/Alloy (Fe – Pd)-Nanoparticles- embedded multiwall carbon nanotube/sulfonated polyaniline composites by γ irradiation10.1002/pola.21451 ↗
32. Suppression effect of Ni grain size on the Ni3Sn4 growth at the Sn/Ni interface10.1016/j.matchar.2017.04.013 ↗
33. Effect of thermomigration on the growth kinetics of Cu6Sn5 at liquid-solid interfaces in Cu/Sn/Cu solid joints
34. On the fracture of silicon particle in aluminum-silicon alloys