journal article·2018-09

Formation of gradient Ga distribution in Cu(In,Ga)Se2 thin-film solar cells prepared by (InGa)2Se3/CuInGaSe2 stacking structure followed by Se-Vapor selenization

Yu-Pin Lin, Tsung-Eong Hsieh, Yen-Chih Chen, Kun-Ping Huang

Publisher page

Abstract

Abstract Cu(In,Ga)Se2 (CIGS) light absorption layers with gradient Ga distribution were prepared by utilizing the sequential deposition of (InGa)2Se3 (IGS) and CIGS layers. The IGS buffer layers were deposited on Mo/soda lime glass substrate at various working pressures (WP = 1, 10 and 30 mtorr) followed by the deposition of CIGS layers. Afterward, the microstructures and compositions of CIGS layers formed by the selenization of CIGS/IGS stacking layers in Se vapor ambient at 560 °C for 1 h were investigated. The CIGS layer with the optimized microstructure and transport properties was then implanted in the thin-film solar cells and the device with the best conversion efficiency of 8.22 ± 0.0754% was achieved. The satisfactory solar cell performance was ascribed to the insertion of IGS layer which remedies the deficiency of In, Ga and Se elements and forms the gradient Ga distribution in CIGS layer as revealed by the secondary ion mass spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. CuInSe2 for photovoltaic applications10.1063/1.349175 ↗
2. Compositional and optoelectronic properties of CIS and CIGS thin films formed by electrodeposition10.1016/S0927-0248(99)00033-1 ↗
3. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%10.1002/pip.1078 ↗
4. Investigations on electron beam evaporated Cu(In0.85Ga0.15)Se2 thin film solar cells10.1016/j.solener.2009.06.003 ↗
5. Optimizing Ga-profiles for highly efficient Cu(In,Ga)Se2 thin film solar cells in simple and complex defect models10.1088/0022-3727/47/48/485104 ↗
6. Study of the effect of gallium grading in Cu(In,Ga)Se210.1016/S0040-6090(99)00845-7 ↗
7. Effect of Ga addition to CuInSe2 on its electronic, structural, and defect properties10.1063/1.121548 ↗
8. Structure and chemistry of CuInSe2 for solar cell technology: current understanding and recommendations10.1016/0040-6090(94)90228-3 ↗
9. Device modeling of the performance of Cu(In,Ga)Se2 solar cells with V-shaped bandgap profiles10.1155/2014/186579 ↗
10. Time-resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors10.1002/pip.2531 ↗
11. High efficiency Cu(In,Ga)Se2- based solar cells: processing of novel absorber structures
12. Cu(In,Ga)Se2 thin films grown with a Cu-poor/rich/poor sequence: growth model and structural considerations10.1002/pip.495 ↗
13. High quality baseline for high efficiency, Cu(In1-x,Gax)Se2 solar cells10.1002/pip.757 ↗
14. Fabrication of Cu(In,Ga)Se2 thin films solar cell by selenization process with Se vapor10.1016/j.solener.2005.07.011 ↗
15. Improvement of Ga distribution and enhancement of grain growth of CuInGaSe2 by incorporating a thin CuGa layer on the single CuInGa precursor10.1016/j.solener.2011.09.005 ↗
16. An optimized In-CuGa metallic precursors for chalcopyrite thin films10.1016/j.tsf.2013.08.054 ↗
17. Selenization annealing effect of DC-sputtered metallic precursors using the rapid thermal process for Cu(In,Ga)Se2 thin film solar cells10.1016/j.tsf.2013.03.101 ↗
18. The structural and material properties of CuInSe2 and Cu(In,Ga)Se2 prepared by selenization of stacks of metal and compound precursors by Se vapor for solar cell applications10.1016/j.solmat.2008.12.002 ↗
19. 13.6%-efficient Cu(In,Ga)Se2 solar cell with absorber fabricated by RF sputtering of (In,Ga)2Se3 and CuSe targets10.1016/j.solmat.2013.02.001 ↗
20. Development of CIGS2 solar cells with lower absorber thickness10.1016/j.solener.2009.05.005 ↗
21. Photoluminescence study of the defect-induced recombination in Cu(In,Ga)Se2 solar cell10.1016/j.solener.2013.09.027 ↗
22. Preparation of Cu(In,Ga)Se2 thin film by sputtering from Cu(In,Ga)Se2 quaternary target10.1016/j.pnsc.2013.02.006 ↗
23. Effect of working pressure on growth of Cu(In,Ga)Se2 thin film deposited by sputtering from a single quaternary target10.1016/j.matlet.2013.10.112 ↗
24. Influence of Se supply for selenization of Cu(In,Ga)Se2 precursors deposited by sputtering from a single quaternary target10.1016/j.matlet.2013.12.050 ↗
25. Effect of selenization pressure on CuInSe2 thin films selenized using co-sputtered Cu-In precursors10.1016/S0927-0248(99)00157-9 ↗
26. SEM analysis and selenization of Cu–In alloy films produced by co-sputtering of metals10.1016/j.solmat.2008.01.007 ↗
27. Achievement of 19.7% efficiency with a small-sized Cu(InGa)(SeS)2 solar cells prepared by sulfurization after selenization process with Zn-based buffer
28. Synthesis and characterization of CuInSe2 thin films from Cu, in and Se stacked layers using a closed graphite box10.1016/0927-0248(95)00160-3 ↗
29. Precursor modification for preparation of CIS films by selenization technique10.1016/S0927-0248(98)00039-7 ↗
30. CIGS formation by high temperature selenization of metal precursors in H2Se Atmosphere10.1016/j.sse.2012.05.055 ↗
31. Rapid CIS-process for high efficiency PV-modules: development towards large area processing10.1016/S0040-6090(00)01800-9 ↗
32. Influence of the Cu(In,Ga)Se2 Thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
33. Preparation of Cu(In,Ga)Se2 thin film solar cells by two-stage selenization processes using N2 gas10.1016/j.solmat.2004.11.014 ↗
34. Impacts of process parameters on CIGS solar cells prepared by selenization process with Se vapor
35. Improved efficiency of a large-area Cu(In,Ga)Se2 solar cell by a nontoxic hydrogen-assisted solid Se vapor selenization process
36. Fabrication of Cu(In,Ga)Se2 Thin Films by Sputtering from a Single Quaternary Chalcogenide Target10.1002/pip.1001 ↗
37. Cu(In,Ga)Se2 thin films and devices sputtered from a single target without additional selenization10.1016/j.tsf.2011.06.014 ↗
38. Kodigala · 2010 · 55
39. One-step synthesis of Cu(In,Ga)Se2 absorber layers by magnetron sputtering from a single quaternary target10.1016/j.tsf.2012.05.035 ↗
40. Raman investigations of Cu(In,Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
41. Effects of residual copper selenide on CuInGaSe2 solar cells
42. Effect of deposition conditions on the characteristics of ZnO–SnO2 thin films deposited by filtered vacuum arc10.1016/j.tsf.2006.07.050 ↗
43. Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique10.1016/j.cap.2009.11.082 ↗
44. Spectral dependence and Hall effect of persistent photoconductivity in polycrystalline Cu(In,Ga)Se2 thin films10.1063/1.1459597 ↗