journal article·2017-06

Synthesis of nano-TiO 2 with slurry explosives of different densities and spread calculation

Honghao Yan, Tiejun Zhao, Xiaojie Li, Xiaohong Wang, Linsong Wu

Publisher page

Abstract

Abstract Titaniferous slurry explosives with different densities were obtained through the addition of expanded polystyrene. The explosives were made to explode in a reaction kettle to prepare nano-TiO2. The phases, morphology, and optical properties of the samples were characterized through X-ray diffraction, transmission electron microscopy, and UV–vis spectrophotometry. The detonation parameters were calculated with the Becker–Kistiakowsky–Wilson state equation. Results showed that the TiO2 nanoparticles consisted of rutile and anatase phases. The nanoparticles were irregular and polygonal with a size of 10 nm to 20 nm. The density of the explosives exerted minimal influence on the phases and anatase content. However, it affected dispersity and size uniformity. As the density increased, the dispersity and size uniformity of the TiO2 particles improved, and the blue shift phenomenon appeared. The minimum band gap of the samples was 2.94 eV. A small explosive density led to low detonation pressure and velocity. To analyze the growth rule of the original nanoparticles in the expansion area, the spread velocity and diffusion range of the nanoparticles were studied. The detonation products dispersed radially with a spread range of 14.27 × P C J 9 times the spherical cartridge radius. The maximum spread velocity was 1211.4 m/s to 1340.5 m/s. When the cartridge radius was 0.05 m, the minimum spread velocity was approximately 4.0 m/s, and the duration of detonation products was approximately 1.4 ms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Energetic Materials and Combustion · Laser-Ablation Synthesis of Nanoparticles · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. China’s water pollution by persistent organic pollutants10.1016/j.envpol.2011.12.022 ↗
2. High efficient photocatalytic degradation of p-Nitrophenol on a Unique Cu2O/TiO2 p-n Heterojunction Network catalyst10.1021/es101711k ↗
3. Synthesis of TiO2 nanopellet by TiCl4 as a precursor for degradation of RhodamineB10.1016/j.matchemphys.2010.02.035 ↗
4. High performance sulfur, nitrogen and carbon doped mesoporous anatase-brookite TiO2 photocatalyst for the removal of microcystin-LR under visible light irradiation10.1016/j.jhazmat.2014.08.038 ↗
5. Graphene/TiO2 nanocomposites: synthesis, characterization and application in hydrogen evolution from water photocatalytic splitting10.1039/b917240h ↗
6. Anatase formation during the synthesis of mesoporous titania and its photocatalytic effect10.1021/jp050310+ ↗
7. Sulphur doped nano TiO2: synthesis, characterization and photocatalytic degradation of a toxic chemical in presence of sunlight10.1016/j.matchemphys.2014.08.036 ↗
8. Microwave-assisted hydrothermal synthesis of mesoporous anatase TiO2 via sol-gel process for dye-sensitized solar cells10.1016/j.micromeso.2010.12.038 ↗
9. Anatase TiO2 single crystals with exposed {001} and {110} facets: facile synthesis and enhanced photocatalysis10.1039/b924172h ↗
10. Effect of TiO2 electrode thickness on photovoltaic properties of dye sensitized solar cell based on randomly oriented Titania nanotubes10.1016/j.matchemphys.2011.01.032 ↗
11. Size influences the cytotoxicity of poly (lactic-co-glycolic acid) (PLGA) and titanium dioxide (TiO(2)) nanoparticles10.1007/s00204-012-0938-8 ↗
12. Using the Box-Benkhen technique to statistically model phenol photocatalytic degradation by titanium dioxide nanoparticles10.1016/j.cej.2008.11.039 ↗
13. Effects of particle size of TiO2 on photocatalytic degradation of methylene blue in aqueous suspensions10.1021/ie980378u ↗
14. Electrospun nickel doped titanium dioxide nanofibers as an effective photocatalyst for the hydrolytic dehydrogenation of ammonia borane10.1016/j.ijhydene.2012.03.164 ↗
15. Synthesis of high surface area nanocrystalline anatase-TiO2 powders derived from particulate sol-gel route by tailoring processing parameters10.1007/s10971-006-8267-0 ↗
16. Photocatalytic degradation activity of titanium dioxide sol–gel coatings on stainless steel wire meshes10.1016/j.matchemphys.2010.08.062 ↗
17. Synthesis of anatase TiO2 supported on porous solids by chemical vapor deposition10.1016/S0920-5861(01)00298-X ↗
18. Water concentration controlled hydrolysis and crystallization in n-octanol to TiO2 nanocrystals with size below 10 nm10.1016/j.matchemphys.2011.09.018 ↗
19. Sub-10 nm rutile titanium dioxide nanoparticles for efficient visible-light-driven photocatalytic hydrogen production
20. Hyperbranched polyester-stabilized Nanotitania-coated vectran fibers with improved UV-blocking performance10.1002/mame.201400166 ↗
21. Synthesis of nanocrystalline TiO2 with high photoactivity and large specific surface area by sol-gel method10.1016/j.materresbull.2004.11.001 ↗
22. Study on the lattice distortion of the As-prepared nanosized TiO2 particles via detonation method10.1016/j.jpcs.2007.07.092 ↗
23. Preparation and characterization of the TiO2 ultrafine particles by detonation method10.1016/j.materresbull.2007.02.038 ↗
24. Synthesis of Cu-doped nano-TiO2 by detonation method10.1016/j.ceramint.2015.07.046 ↗
25. Study of the effect of covolumes in BKW equation of state on detonation properties of CHNO explosives10.1002/prep.201100150 ↗
26. Quantitative analysis of anatase-rutile mixtures with an X-ray diffractometer10.1021/ac60125a006 ↗
27. On the estimation of average crystallite size of zeolites from the Scherrer equation: a critical evaluation of its application to zeolites with one-dimensional pore systems10.1016/j.micromeso.2008.06.010 ↗
28. Relationship between absorbance spectra and particle size distributions for quantum-sized nanocrystals10.1021/jp0303218 ↗
29. State of detonation products of solid explosives