Effect of assembled time on the corrosion behaviors of SAMs film on the AM60B alloy and its assembled mechanism
Source abstract
Abstract
Abstract The influence of assembled time on the corrosion behaviors of SAMs film on the AM60B alloy and its assembled mechanism have been investigated by electrochemical measurements, scanning electron microscopy (SEM) observation and X-ray photoelectron spectroscopy (XPS) analysis. The self-assembled experiment on the AM60B magnesium alloy indicates that the corrosion susceptibility decreases with increasing assembled time until 24 h on cast AM60B alloy and then increases with increase of the assembled time proved by EIS measurement and potentiodynamic curves. The self-assembled experiments on pure magnesium and various heat treated cast AM60B magnesium alloy illuminate that the dissolved aluminum in magnesium solid solution is the key factor for assembled efficiency and is hard to self-assemble on the pure magnesium without aluminum. The corrosion resistance of self-assembled film on AM60B magnesium alloy is monotonically increasing with the dissolved aluminum. The results of XPS analysis reveal the assembled mechanism on AM60B and corroborate the function of Al element.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Recent progress in corrosion and protection of magnesium alloys10.1002/adem.200500013 ↗
2. Influences of the quantity of Mg2Sn phase on the corrosion behavior of Mg-7Sn magnesium alloy10.1016/j.electacta.2010.12.030 ↗
3. Corrosion behaviors of electroless plating Ni–P coatings deposited on magnesium alloys in artificial sweat solution10.1016/j.electacta.2007.08.062 ↗
4. Understanding magnesium corrosion—a framework for improved alloy performance10.1002/adem.200310405 ↗
5. Formation and structure of self-assembled monolayers10.1021/cr9502357 ↗
6. Corrosion inhibition by self-assembled monolayers for enhanced wire bonding on Cu surfaces10.1016/S0167-9317(03)00283-1 ↗
7. Photosensitive self-assembled membrane of cysteine against copper corrosion10.1016/j.matlet.2011.02.084 ↗
8. Protection of copper corrosion by modification of dodecanethiol self-assembled monolayers prepared in aqueous micellar solution10.1016/j.electacta.2009.06.078 ↗
9. Zirconium-phosphate films self-assembled on aluminum substrate toward corrosion protection10.1016/S0257-8972(03)00139-7 ↗
10. Self-assembled NAnophase Particle (SNAP) surface treatments for corrosion protection of AA2024-T310.1016/j.porgcoat.2004.05.007 ↗
11. Self-assembled monolayer and multilayer thin films on aluminum 2024-T3 substrates and their corrosion resistance study
12. Self-assembly of (3-mercaptopropyl)trimethoxysilane on polycrystalline zinc substrates towards corrosion protection10.1016/S0169-4332(03)00142-9 ↗
13. Self-assembled alkanethiol monolayers on a Zn substrate: interface studied by XPS10.1016/j.susc.2008.03.044 ↗
14. Corrosion protection properties of hydroxamic acid self-assembled monolayer on carbon steel10.1016/j.corsci.2008.02.008 ↗
15. Preparation of one-dimensional polymer films by modification of a hydroxymethylbenzene self-assembled monolayer on iron with alkyltriethoxysilanes for preventing iron corrosion10.1016/j.corsci.2007.04.004 ↗
16. An ultrathin polymer coating of carboxylate self-assembled monolayer adsorbed on passivated iron to prevent iron corrosion in 0.1 M Na2SO410.1016/j.corsci.2009.06.055 ↗
17. Self-assembled monolayers on magnesium alloy surfaces from carboxylate ions10.1016/j.apsusc.2005.05.072 ↗
18. Self-assembled monomolecular films of oleic imidazoline on magnesium alloy AZ91D for corrosion protection
19. Functionalization of biodegradable magnesium alloy implants with alkylphosphonate self-assembled films10.1016/j.msec.2013.01.028 ↗
20. Self-assembled monolayers formed on AZ31 Mg alloy10.1016/j.jpcs.2012.02.018 ↗
21. Formation and stability of organic acid monolayers on magnesium alloy AZ31: the role of alkyl chain length and head group chemistry10.1016/j.apsusc.2013.06.113 ↗
22. Liquid phase formation of alkyl- and perfluoro-phosphonic acid derived monolayers on magnesium alloy AZ31 and their chemical properties10.1016/j.jcis.2011.04.039 ↗
23. Self-assembled monolayer of an iron(III) porphyrin disulphide derivative on gold10.1016/S1388-2481(02)00530-1 ↗
24. New formation process of plating thin films on several substrates by means of self-assembled monolayer (SAM) process10.1016/j.electacta.2007.04.004 ↗
25. Self-assembled monolayer of 2-(octadecylthio)benzothiazole for corrosion protection of copper10.1016/j.corsci.2009.03.034 ↗
26. Langmuir and self-assembled monolayers10.1016/S1359-0294(99)00002-3 ↗
27. Cao · 2002
28. Surface tension at the electrolyte solution–metal electrode interface–III. polyvalent and non-symmetrical electrolytes10.1016/0013-4686(90)87042-Z ↗
29. Gel formation and the efficiency of anodic film growth on aluminium10.1016/S0013-4686(98)00363-6 ↗
30. Massalski · 1990
31. Characterization of octadecylsilane and stearic-acid layers on Al2O3 surfaces by Raman-spectroscopy10.1021/la00005a048 ↗
32. A DFT study of the Al2O3 atomic layer deposition on SAMs: effect of SAM termination10.1021/cm035009p ↗