journal article·2014-10

Fast and simultaneous growth of graphene, intermetallic compounds, and silicate on Cu–Ni alloy foils

Wan-Gyu Lee, Eunho Kim, Jongwan Jung

Materials Chemistry and Physics· Volume 147· Issue 3
Publisher page

Abstract

Abstract A graphene bilayer was grown on copper–nickel alloy foils (30 at-% Ni: 70 at-% Cu designated as a 30Ni–70Cu) via an inductively coupled plasma–chemical vapor deposition chamber, and was characterized. The first layer fully covered the foil, while there was partial coverage of the second layer. At the same time, the alloy catalyst produced a compound of magnesium silicate in some regions and of copper sulfide in other regions on which a graphene monolayer simultaneously grew without any discontinuity or boundaries of the 1st graphene monolayer between simultaneous growth and graphene-only growth regions. Compared with Cu foils, the alloy foils led to faster growth of the graphene film in graphene-only growth regions, while maintaining the same quality, homogeneity, and thickness uniformity as a monolayer graphene grown on Cu. Raman spectroscopy and scattering demonstrated that the 2D and D bands of the Raman spectra were in the same position for the monolayer graphene on 30Ni–70Cu regardless of the grown regions and for the graphene on the Cu with a full width at half maximum of ∼38 cm−1 ranging from 30 to 55 cm−1 of 2D, and without a D band in the spectra of the graphene monolayer and bilayer. Thus the resulting graphene growth is affected primarily by the Cu catalyst, partly by the compounds grown simultaneously with the graphene monolayer on the foil surface via thermal reactions of the impurities dissolved in the alloy matrix, and partly by the Ni. The quality of the graphene is dependent on the major composition of Cu catalyst in the alloy foils. On the other hands, the alloying element of Ni governs the growth kinetics unless the alloy foils is covered with the intermetallic compounds and silicate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Graphene and Nanomaterials Applications · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
2. Two-dimensional gas of massless Dirac fermions in graphene10.1038/nature04233 ↗
3. The rise of graphene10.1038/nmat1849 ↗
4. Energy gaps in graphene nanoribbons10.1103/PhysRevLett.97.216803 ↗
5. Energy band-gap engineering of graphene nanoribbons10.1103/PhysRevLett.98.206805 ↗
6. Transport gap in side-gated graphene constrictions10.1103/PhysRevB.79.075426 ↗
7. Chemically derived, ultrasmooth graphene nanoribbon semiconductors10.1126/science.1150878 ↗
8. The influence of edge structure on the electronic properties of graphene quantum dots and nanoribbons10.1038/nmat2378 ↗
9. Room-temperature all-semiconducting sub-10-nm graphene nanoribbon field-effect transistors10.1103/PhysRevLett.100.206803 ↗
10. Organic solar cells with solution-processed graphene transparent electrodes10.1063/1.2924771 ↗
11. Intrinsic response of graphene vapor sensors10.1021/nl8033637 ↗
12. Graphene-based ultracapacitors10.1021/nl802558y ↗
13. Structural coherency of graphene on Ir(111)10.1021/nl0728874 ↗
14. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
15. Wafer-scale synthesis and transfer of graphene films10.1021/nl903272n ↗
16. Large area, few-layer graphene films on arbitrary substrates by chemical vapor deposition10.1021/nl801827v ↗
17. Large-area synthesis of high-quality and uniform graphene films on copper foils10.1126/science.1171245 ↗
18. Wafer scale homogeneous bilayer graphene films by chemical vapor deposition10.1021/nl1029978 ↗
19. Growth of large-area single- and bi-layer graphene by controlled carbon precipitation on polycrystalline Ni surfaces10.1007/s12274-009-9059-y ↗
20. Graphene segregated on Ni surfaces and transferred to insulators10.1063/1.2982585 ↗
21. Effects of annealing and impurities on tensile properties of electrodeposited nanocrystalline Ni10.1016/j.scriptamat.2004.08.015 ↗
22. Effect of solute segregation on the strength of nanocrystalline alloys: inverse Hall–Petch relation10.1016/j.actamat.2007.05.018 ↗
23. High quality, transferrable graphene grown on single crystal Cu(111) thin films on basal-plane sapphire10.1063/1.3569143 ↗
24. Production of Zr55Cu30Ni5Al10 glassy alloy rod of 30 mm in diameter by a cap-cast technique10.2320/matertrans.M2009156 ↗
25. High-quality production of graphene by liquid-phase exfoliation of expanded graphite10.1016/j.matchemphys.2012.11.012 ↗
26. Transparent and highly conductive liquid-phase exfoliated graphite films treated with low-temperature air-annealing10.1016/j.matchemphys.2013.08.017 ↗
27. Evolution of graphene growth on Ni and Cu by carbon isotope labeling10.1021/nl902515k ↗
28. Segregation growth of graphene on Cu–Ni alloy for precise layer control10.1021/jp202933u ↗
29. Synthesis and characterization of large-area graphene and graphite films on commercial Cu–Ni alloy foils10.1021/nl201699j ↗
30. Substrate grain size and orientation of Cu and Cu–Ni foils used for the growth of graphene films10.1116/1.3663877 ↗
31. Epitaxial graphene on Cu(111)10.1021/nl1016706 ↗
32. Raman spectroscopy of graphene and graphite: disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
33. The structure of suspended graphene sheets10.1038/nature05545 ↗
34. High-yield production of graphene by liquid-phase exfoliation of graphite10.1038/nnano.2008.215 ↗
35. Lee · 1990 · 441
36. Kubaschewski · 1979 · 268