Fabrication and synthesis of uniform TiO2 nanoporous and nanotubular structures on dual-phase Ti–6Al–4V alloy using electron-beam irradiation
Source abstract
Abstract
Abstract Developing homogeneous TiO2 nanoporous arrays (NPAs) and nanotubular arrays (NTAs) on biphasic Ti alloys is challenging. The present study used large-pulse electron-beam (LPEB) irradiation prior to anodizing, and ascertained its effectiveness for developing homogeneous TiO2 NPAs and NTAs on a dual (α + β)-phase Ti–6Al–4V alloy for the first time. The morphological features, structural characteristics, and corrosion resistance of the TiO2 NTAs formed on the LPEB-irradiated Ti–6Al–4V alloy were compared to those obtained on the untreated alloy. The irradiation transformed the dual (α + β)-phase structure into a single α′-martensite phase with a uniform distribution of alloying elements, and enabled the formation of a smooth surface finish with reduced surface roughness. The modified surface facilitated the formation of homogenous NPAs and NTAs. Annealing in air at 500 °C for 2 h transformed the amorphous as-prepared TiO2 NTAs into a mixture of anatase and rutile phases. Despite the appearance of cracks and an increase in intertubular spacing, the NTAs did not collapse. The NTAs formed on the untreated and LPEB-irradiated Ti–6Al–4V alloy provided better corrosion protection than their nonanodized counterparts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. TiO2 nanotubes: self-organized electrochemical formation, properties and applications10.1016/j.cossms.2007.08.004 ↗
2. A review on highly ordered, vertically oriented TiO2 nanotube arrays: fabrication, material properties and solar energy applications10.1016/j.solmat.2006.04.007 ↗
3. A review of growth mechanism, structure and crystallinity of anodized TiO2 nanotubes10.1016/j.mser.2013.10.001 ↗
4. Titanium dioxide nanotubes (TNT) in energy and environmental applications: an overview10.1016/j.rser.2017.01.057 ↗
5. Progress in TiO2 nanotube coatings for biomedical applications: a review10.1039/C8TB00149A ↗
6. Characterization of the morphology, structure and wettability of phase dependent lamellar and nanotube oxides on anodized Ti-10Nb alloy10.1016/j.apsusc.2018.04.079 ↗
7. Self-organized nanotubular oxide layers on Ti-6Al-7Nb and Ti-6Al-4V formed by anodization in NH4F solutions10.1002/jbm.a.30501 ↗
8. Fabrication and characterization of self-organized mixed oxide nanotube arrays by electrochemical anodization of Ti–6Al–4V alloy10.1016/j.matlet.2008.08.015 ↗
9. Growth of TiO2-based nanotubes on Ti–6Al–4V alloy10.1016/j.electacta.2011.07.131 ↗
10. Fatigue strength of Ti-6Al-4V alloy with surface modified by TiO2 nanotubes formation10.1016/j.matlet.2016.04.188 ↗
11. Polishing effect on anodic titania nanotube formation10.1016/j.electacta.2011.04.098 ↗
12. The role of the Ti surface roughness in the self-ordering of TiO2 nanotubes: a detailed study of the growth mechanism10.1039/C4TA00871E ↗
13. Tuning substrate roughness to improve uniform growth and photocurrent response in anodic TiO2 nanotube arrays10.1016/j.ceramint.2018.09.045 ↗
14. A new approach to electropolishing of pure Ti foil in acidic solution at room temperature for the formation of ordered and long TiO2 nanotube arrays10.1016/j.corsci.2018.02.040 ↗
15. Electropolishing for the formation of anodic nanotubular TiO2 with uniform length and density10.1016/j.apsusc.2011.03.089 ↗
16. Surface modification of the metal plates using continuous electron beam process (CEBP)10.1016/j.apsusc.2014.05.041 ↗
17. Influence of a large pulsed electron beam (LPEB) on the corrosion resistance of Ti-6Al-7Nb alloys10.1016/j.corsci.2014.10.008 ↗
18. The effect of large-area pulsed electron beam melting on the corrosion and microstructure of a Ti6Al4V alloy10.1016/j.apsusc.2014.05.105 ↗
19. Effect of high current pulsed electron beam irradiation on wear and corrosion resistance of Ti6Al4V10.1016/j.surfcoat.2012.08.009 ↗
20. Effects of electron-beam pretreatment on anodically grown TiO2 nanotubes10.1149/2.0061504eel ↗
21. Effect of anodizing potential on The formation and EIS characteristics of TiO2 nanotube arrays10.1149/2.077204jes ↗
22. Interfacial barrier layer properties of three generations of TiO2 nanotube Arrays10.1016/j.electacta.2014.04.086 ↗
23. Role of crystallinity on the nanomechanical and electrochemical properties of TiO2 nanotubes10.1016/j.jelechem.2016.03.032 ↗
24. Cell interaction with modified nanotubes formed on titanium alloy Ti-6Al-4V10.1016/j.msec.2016.04.037 ↗
25. The effect of initial etching sites on the morphology of TiO2 nanotubes on Ti-6Al-4V alloy10.1149/2.0011511jes ↗
26. Smooth anodic TiO2 nanotubes10.1002/anie.200502781 ↗
27. Simulation of anodizing current-time curves and morphology evolution of TiO2 nanotubes anodized in electrolytes with different NH4F concentrations10.1016/j.electacta.2015.07.110 ↗
28. Fabrication of highly ordered TiO2 nanotube Arrays via anodization of Ti–6Al–4V alloy sheet10.1166/jnn.2010.3006 ↗
29. Thermal degradation of TiO2 nanotubes on titanium10.1016/j.apsusc.2014.08.107 ↗
30. Smooth anodic TiO2 nanotubes: annealing and structure10.1002/pssa.200622214 ↗
31. Structural, morphological, and electrochemical corrosion properties of TiO2 formed on Ti6Al4V alloys by anodization10.1002/crat.201800138 ↗
32. Electrochemical behaviour and bioactivity of self-organized TiO2 nanotube arrays on Ti-6Al-4V in Hanks' solution for biomedical applications10.1016/j.electacta.2014.12.032 ↗
33. Raman spectroscopy of sol–gel derived titanium oxide thin films10.1002/jrs.2899 ↗
34. Photocatalytic activity of TiO2 films grown on different substrates10.1016/S0045-6535(00)00360-X ↗
35. Characteristics of the surface oxides on turned and electrochemically oxidized pure titanium implants up to dielectric breakdown: the oxide thickness, micropore configurations, surface roughness, crystal structure and chemical composition10.1016/S0142-9612(01)00131-4 ↗
36. The effects of spark anodizing treatment of pure titanium metals and titanium alloys on corrosion characteristics10.1016/j.surfcoat.2006.11.022 ↗
37. Effect of nano-scale martensite and β phase on the passive film formation and electrochemical behaviour of Ti-10V-2Fe-3Al alloy in 3.5% NaCl solution10.1016/j.electacta.2018.07.047 ↗
38. Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting10.1016/j.corsci.2018.09.010 ↗
39. Influence of morphology and crystalline structure of TiO2 nanotubes on their electrochemical properties and apatite-forming ability10.1016/j.electacta.2017.05.160 ↗
40. Electrochemical stability of TiO2 nanotubes with different diameters in artificial saliva10.1016/j.surfcoat.2011.06.038 ↗
41. Electrochemical response of TiO2 anodic layers fabricated on Ti6Al4V alloy with nanoporous, dual and nanotubular morphology10.1016/j.corsci.2016.07.021 ↗
42. Correlation of the nanostructure of the anodic layers fabricated on Ti13Nb13Zr with the electrochemical impedance response10.1016/j.corsci.2015.01.041 ↗